Flush Mounts

fredhsu · August 10th, 2012, 11:18 AM

Where can you find cheap flush mounts why is everything over $60

Maielstrom · August 10th, 2012, 11:46 AM

What kind of style are you looking for? I've got BikeMaster Universal Flush Mounts on mine, I like the look of them, and they're plenty visible, also not LED so you don't have to worry about changing the relay (but the bulb that comes with them needs to be replaced)

http://www.ninjette.org/forums/showt...189#post524189

This thread has a video, and others posted photos of what these flush mounts look like when on the bike. I believe they were between $20-$25 through BikeBandit.

Bike Bandit also has a few other LED flush mounts pretty inexpensive I think too, but remember with LED you need to change the relay.

fredhsu · August 10th, 2012, 11:48 AM

Quote:

Originally Posted by Maielstrom

What kind of style are you looking for? I've got BikeMaster Universal Flush Mounts on mine, I like the look of them, and they're plenty visible, also not LED so you don't have to worry about changing the relay (but the bulb that comes with them needs to be replaced)

http://www.ninjette.org/forums/showt...189#post524189

This thread has a video, and others posted photos of what these flush mounts look like when on the bike. I believe they were between $20-$25 through BikeBandit.

Bike Bandit also has a few other LED flush mounts pretty inexpensive I think too, but remember with LED you need to change the relay.

I have LED rear's already so i already changed my relay haha. But yea ill look into it! maybe ill just make my stock ones into flush mounts

Maielstrom · August 10th, 2012, 11:52 AM

Quote:

Originally Posted by fredhsu

I have LED rear's already so i already changed my relay haha. But yea ill look into it! maybe ill just make my stock ones into flush mounts

Oh you're set then! Definitely take a look at BikeBandit though, I wasn't looking to mess around with the relay, so I didn't take much of a look at their LED ones. I'm pretty sure they had some at a reasonable price. If anything, you can even google the ones they have there and see if they come up cheaper somewhere else. The BikeMaster's were cheaper on another site, but I had a BikeBandit giftcard so I went with them.

fredhsu · August 10th, 2012, 12:09 PM

Quote:

Originally Posted by Maielstrom

Oh you're set then! Definitely take a look at BikeBandit though, I wasn't looking to mess around with the relay, so I didn't take much of a look at their LED ones. I'm pretty sure they had some at a reasonable price. If anything, you can even google the ones they have there and see if they come up cheaper somewhere else. The BikeMaster's were cheaper on another site, but I had a BikeBandit giftcard so I went with them.

Oh got it! alright man thanks a lot!

Monkeytofu · August 10th, 2012, 12:52 PM

http://www.ebay.com/itm/Clear-Motorc...554f6a&vxp=mtr

I use these on my pregen, but they'd look good on a newgen bike. Ebay has the cheapest flush mounts you can get and the ones I linked are the brightest flush mount lights I've had on my bike.

msebastian · August 11th, 2012, 11:17 AM

http://www.bikelitez.com/product_p/k0809250rts.htm

Check these ones out. Reasonable price and kind of a hidden look.

MrTsquared903 · August 13th, 2012, 04:12 PM

If you're looking to save money (as I am) check this out. Doesn't look bad to me so I'll probably be doing this sometime this week or next.

http://www.youtube.com/watch?v=6pUl_K8AS_I

red5 · August 14th, 2012, 05:48 PM

Quote:

Originally Posted by msebastian

http://www.bikelitez.com/product_p/k0809250rts.htm

Check these ones out. Reasonable price and kind of a hidden look.

Rather defeats the purpose, no?

Baddog · August 15th, 2012, 01:49 PM

I know they are about $70, but the Proton flushmounts are a great fit and a solid product. I have a set on my 636 and just installed a set on my bud's 08-250. Just because it's cheap doesn't make it a bargain.

polokid699 · August 21st, 2012, 10:28 AM

Quote:

Originally Posted by Baddog

I know they are about $70, but the Proton flushmounts are a great fit and a solid product. I have a set on my 636 and just installed a set on my bud's 08-250. Just because it's cheap doesn't make it a bargain.

I have those Proton flush mounts on my 2012 250R and they fit perfect and can be set to just blink or strobe and look great IMO.

Baddog · August 21st, 2012, 01:59 PM

If you like, I have a brand new set I just pulled off an 08 250. Perfect condition. $60 plus shipping. Just PM if interested.

ForceofWill · August 21st, 2012, 02:03 PM

http://modmy250.com/

Support your fellow ninjetters. Tri runs this site. I've used his stuff for a while now and I'll always have them on my bike. When you go Proton or the like you have to either solder them on or get stock plugs/cut yours off and fit them onto the end of the blinkers. Tri has already taken care of all of this for you. They're plug and play and very professionally done.

I actually bought a set from him and a set of Protons for comparison. I gave the Protons to @massacremasses for free last X-mas, and he promptly gave his 250 away for free as well lol.

massacremasses · August 26th, 2012, 10:58 PM

Quote:

Originally Posted by ForceofWill

http://modmy250.com/

Support your fellow ninjetters. Tri runs this site. I've used his stuff for a while now and I'll always have them on my bike. When you go Proton or the like you have to either solder them on or get stock plugs/cut yours off and fit them onto the end of the blinkers. Tri has already taken care of all of this for you. They're plug and play and very professionally done.

I actually bought a set from him and a set of Protons for comparison. I gave the Protons to @massacremasses for free last X-mas, and he promptly gave his 250 away for free as well lol.

Im still bitter.

**** craigs list assholes. I miss that 250. So sexy. If I could have kept both my bikes I would have. I like the protons better than Tri's simply because of the look. But to each their own. Tri's are cheaper I believe.

CThunder-blue · August 27th, 2012, 09:34 AM

Quote:

Originally Posted by ForceofWill

http://modmy250.com/

Support your fellow ninjetters. Tri runs this site. I've used his stuff for a while now and I'll always have them on my bike. When you go Proton or the like you have to either solder them on or get stock plugs/cut yours off and fit them onto the end of the blinkers. Tri has already taken care of all of this for you. They're plug and play and very professionally done.

I actually bought a set from him and a set of Protons for comparison. I gave the Protons to @massacremasses for free last X-mas, and he promptly gave his 250 away for free as well lol.

Thanks Tom!

Completely unrelated, but I'm developing something new that's plug and play too

. Currently on it's second day of testing and it's working great.

massacremasses · August 27th, 2012, 10:30 AM

Quote:

Originally Posted by CThunder-blue

Thanks Tom!

Completely unrelated, but I'm developing something new that's plug and play too

. Currently on it's second day of testing and it's working great.

hey I might actually try and use yours for my DRZ. The dude put some nasty ones on that I dont like... I could open up a whole new market for you

CThunder-blue · August 27th, 2012, 10:55 AM

Quote:

Originally Posted by massacremasses

hey I might actually try and use yours for my DRZ. The dude put some nasty ones on that I dont like... I could open up a whole new market for you

I have them in stock

August 10th, 2012, 11:18 AM	#1
fredhsu ninjette.org member Name: Fred Location: Orange County Join Date: May 2012 Motorcycle(s): Ninja 250r 2012 Posts: 60	Flush Mounts Where can you find cheap flush mounts why is everything over $60 __________________________________________________ Rah

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flush Mounts?!	scubaru	1986 - 2007 Ninja 250R Farkles	62	January 1st, 2014 02:39 PM
Rear flush mounts	02337	1986 - 2007 Ninja 250R Farkles	3	January 10th, 2013 08:26 AM
Flush mounts too small...	Incognito	2008 - 2012 Ninja 250R Farkles	13	October 2nd, 2012 05:42 PM
Proton Flush Mounts	Jerkson	Motorcycle-related	6	September 23rd, 2010 05:23 PM
Flush Mounts for 500	reondadomino	General Motorcycling Discussion	9	December 19th, 2009 03:01 PM

August 10th, 2012, 11:46 AM	#2
Maielstrom Ghost Rider Name: Eric Location: Westchester, NY Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250r Posts: 84	What kind of style are you looking for? I've got BikeMaster Universal Flush Mounts on mine, I like the look of them, and they're plenty visible, also not LED so you don't have to worry about changing the relay (but the bulb that comes with them needs to be replaced) http://www.ninjette.org/forums/showt...189#post524189 This thread has a video, and others posted photos of what these flush mounts look like when on the bike. I believe they were between $20-$25 through BikeBandit. Bike Bandit also has a few other LED flush mounts pretty inexpensive I think too, but remember with LED you need to change the relay.

August 10th, 2012, 12:52 PM	#6
Monkeytofu I told you bro Name: Noor Location: Austin, Texas Join Date: Jun 2012 Motorcycle(s): 1996 Ninja 250r Posts: 680	http://www.ebay.com/itm/Clear-Motorc...554f6a&vxp=mtr I use these on my pregen, but they'd look good on a newgen bike. Ebay has the cheapest flush mounts you can get and the ones I linked are the brightest flush mount lights I've had on my bike.

August 11th, 2012, 11:17 AM	#7
msebastian ninjette.org guru Name: Michael Location: Dayton, Ohio Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R SE Posts: 262	http://www.bikelitez.com/product_p/k0809250rts.htm Check these ones out. Reasonable price and kind of a hidden look.

August 13th, 2012, 04:12 PM	#8
MrTsquared903 ninjette.org member Name: Tony Location: Dallas Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250r Posts: 78	If you're looking to save money (as I am) check this out. Doesn't look bad to me so I'll probably be doing this sometime this week or next. http://www.youtube.com/watch?v=6pUl_K8AS_I

August 15th, 2012, 01:49 PM	#10
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	I know they are about $70, but the Proton flushmounts are a great fit and a solid product. I have a set on my 636 and just installed a set on my bud's 08-250. Just because it's cheap doesn't make it a bargain.

August 21st, 2012, 01:59 PM	#12
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	If you like, I have a brand new set I just pulled off an 08 250. Perfect condition. $60 plus shipping. Just PM if interested.

August 21st, 2012, 02:03 PM	#13
ForceofWill Blind 250 Loving Whore Name: Tom Location: Chesapeake, VA Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.	http://modmy250.com/ Support your fellow ninjetters. Tri runs this site. I've used his stuff for a while now and I'll always have them on my bike. When you go Proton or the like you have to either solder them on or get stock plugs/cut yours off and fit them onto the end of the blinkers. Tri has already taken care of all of this for you. They're plug and play and very professionally done. I actually bought a set from him and a set of Protons for comparison. I gave the Protons to @massacremasses for free last X-mas, and he promptly gave his 250 away for free as well lol.