ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old June 11th, 2018, 09:25 PM   #1
Darksik
ninjette.org member
 
Darksik's Avatar
 
Name: David
Location: Mexico
Join Date: Sep 2017

Motorcycle(s): 2010 Kawasaki Ninja 250R, 99' Suzuki Katana 600 (RIP)

Posts: 51
Size of handlebar end side mirrors

Hi guys, i have some questions, what are the size of the stock handlebar from a 2010 ninja 250, because i want to put some handlebar mirrors, and in some webpages (Aliexpress) they sold for "sizes", somebody know what is the size of the handlebar? I want some mirrors like this




Also i was looking and they sell some "Mirror Block off plates" to put where the normal mirrors put on the bike, someone know if i need to buy that mirror block plates, to make the bike look good without the normal mirrors, or someone know some tip to make the bike look good without that mirror block plates, because the mirrors block plates are cheap, but the expensive is the shipping



I want to make the bike look like like this but with the handlebar mirrors





ps: sorry for my bad english
Darksik is offline   Reply With Quote




Old June 11th, 2018, 09:30 PM   #2
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTM - Nov '17
22.2mm OD
15.9mm ID

Try these mirror plates. They say free shipping
https://www.ebay.com/i/252051760450
DannoXYZ is offline   Reply With Quote


Old June 11th, 2018, 09:34 PM   #3
Triple Jim
Guy Who Enjoys Riding
 
Triple Jim's Avatar
 
Name: Jim
Location: North Central North Carolina
Join Date: Jul 2016

Motorcycle(s): Ninja 250

Posts: A lot.
MOTM - Aug '17, Aug '16
My pregen has standard 7/8" OD bars. Mirrors like that usually will clamp to the OD. The supplied adapter will go in the bar and provide a 7/8" OD surface for the clamp to go on if you can't put it directly on the bar OD. I always clamp them right to the bars without adapters, but I had to move the throttle in about 1/2 an inch, drilling a new locating hole for it in the bar. The clutch side was probably similar, but it's been a while.

Newgens may be the same. (?)
Triple Jim is offline   Reply With Quote


Old June 12th, 2018, 12:01 PM   #4
Darksik
ninjette.org member
 
Darksik's Avatar
 
Name: David
Location: Mexico
Join Date: Sep 2017

Motorcycle(s): 2010 Kawasaki Ninja 250R, 99' Suzuki Katana 600 (RIP)

Posts: 51
Quote:
Originally Posted by DannoXYZ View Post
22.2mm OD
15.9mm ID

Try these mirror plates. They say free shipping
https://www.ebay.com/i/252051760450
What is "OD" and "ID" ?

Also that mirror plates don't have free shipping, i think it appears "free" because you are from US, but when i open the link, the shipping is not free, i found another mirror plates, but i don't know if fit that mirror plates are from a zx6r.

https://www.ebay.com/itm/Black-Mirro....c100005.m1851
Darksik is offline   Reply With Quote


Old June 12th, 2018, 03:24 PM   #5
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTM - Nov '17
Quote:
Originally Posted by Darksik View Post
What is "OD" and "ID" ?

Also that mirror plates don't have free shipping, i think it appears "free" because you are from US, but when i open the link, the shipping is not free, i found another mirror plates, but i don't know if fit that mirror plates are from a zx6r.

https://www.ebay.com/itm/Black-Mirro....c100005.m1851
OD=outside diameter for handlebar, clamp-on mirror goes over handlebar
ID = inside diameter of handlebar, insert-in mirror goes inside handlebar

In my original ebay, it has $23.50 shipping to Mexico. You need plates with 2 holes to properly connect fairing to bracket underneath. ZX6 won't work because it has only one hole
DannoXYZ is offline   Reply With Quote


Reply





Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 12:16 AM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2016 ninjette.org, All rights reserved.