July 8th, 2018, 08:29 AM | #1 |
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015 Motorcycle(s): 2004 Ninja 250 Posts: 60
|
Carburetor don't close by itself
Hi
Took my carburetor out to clean, which I have don't it a few times before. After cleaning it and leaving it in a bag overnight the carb doesn't close by itself. Before when I turn the butterflies and let go it would snap back and close. Now if I open the butterflies it stays where it is. How do I fix this? |
|
July 8th, 2018, 12:17 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Do yiu have both cables hooked up?
Before attaching to cables to carbs, did cables move freely? How much play do you have in cables? |
|
July 8th, 2018, 12:28 PM | #3 |
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015 Motorcycle(s): 2004 Ninja 250 Posts: 60
|
as of right now the cable are not hook up. I just took it out to clean and have not put the carb back on to the ninja 250.
I didn't remove any of the outer springs. |
|
July 8th, 2018, 12:36 PM | #4 |
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015 Motorcycle(s): 2004 Ninja 250 Posts: 60
|
It's just stays open
|
|
July 8th, 2018, 02:17 PM | #5 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Shaft needs cleaning and oiling.
|
|
July 8th, 2018, 03:38 PM | #6 |
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015 Motorcycle(s): 2004 Ninja 250 Posts: 60
|
|
|
July 8th, 2018, 04:36 PM | #7 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
See where shaft enters and exits carb bores? Spray those 4 areas with PB-blaster
|
|
July 8th, 2018, 04:42 PM | #8 |
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015 Motorcycle(s): 2004 Ninja 250 Posts: 60
|
|
|
July 8th, 2018, 04:53 PM | #9 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Also squirt some where it leaves on outside at centre of big wound spring.
What's that green stuff on butterfly plate? |
|
July 8th, 2018, 06:25 PM | #10 | |
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015 Motorcycle(s): 2004 Ninja 250 Posts: 60
|
Quote:
Not sure what that green stuff is. It's been there since the first time I cleaned it a few years back. Didn't bother the ninja 250. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
carburetor | skip | 2008 - 2012 Ninja 250R Tech Talk | 9 | June 5th, 2017 12:39 PM |
[motorcycledaily.com] - Team Hero EBR close in on Tissot-Superpole progression at Don | Ninjette Newsbot | Motorcycling News | 0 | May 24th, 2014 03:10 PM |
[kropotkin thinks...] - 2013 Mugello Moto2 Race Result: A Close Race Leads To A Close | Ninjette Newsbot | Motorcycling News | 0 | June 2nd, 2013 04:20 AM |
SaddleBags. How close is TOO close to the exhaust? | Seattle_Chris | Cargo Space | 9 | February 20th, 2010 06:55 PM |
[crash.net - MotoGP] - Hayden: Close don't count! | Ninjette Newsbot | Motorcycling News | 0 | October 25th, 2008 10:33 AM |
|
|