2008+ Ninja 250 race roller

Jiggyfly · April 15th, 2014, 09:41 PM

It ate a motor at Daytona at the end of 2012, and has sat since. Very, very nice, great handling bike, that has everything to be competetive except
an engine. Its pretty much completely toast.... but you're welcome to it!

see if I can remember all of the money I spent on it:
-Ohlins shock- NOT a standard shock. Custom built by Ohlins rep.
-emulators, springs, oil in the forks.
-Clip-ons (I think Vortex)
-Rearsets (CFM?)
-Hotbodies body work that has never been dropped, and is very nicely, professionally painted.
-EBC front rotor.
-braided lines, front and back
-Area P carbon canister full system
-Dynojet jet kit
-415 chain kit with a couple sprockets
-ignition key removed, and a toggle switch installed
-2 windscreens, double-bubble and standard
-Pirelli tires
-thermostat and fan deleted
-spin on gas cap
-SPARE set of wheels
-digital tire warmers
-race stand (cheap one, but works)
-lightened rear rotor

if weight or friction could be removed or reduced, it was. I'm a mechanic by profession, and the bike is very nicely set up. The bike was never crashed, and I did very well on it. (2012 CCS SE Regional Champion, as well as a top 3 WERA bike at every round I attended, from the back of the grid.) The geometry was set up by Dave Moss, and handles, stops, and turns fabulously. You'll need nothing besides the obvious!!

I have several small spares and extra parts. cables, bars, sprockets, cush drives, etc. You'll get everything I have for a Ninja 250. buy a $500 engine and go racing.

$2400

I'm located in Columbia, SC..... and I could possibly help with delivery, or meeting, or whatever. Pics avaialble. I'll see what happens with this ad, and if theres no interest, I'll part it out....... PLEASE dont start asking now, or claiming parts.

Email me, as I'm not here often since I'm not racing any more.

Shon_stanton@yahoo.com

psych0hans · April 15th, 2014, 09:47 PM

Someone needs to buy this and stuff a 300 motor in there... Real quick!!!

oblivion007 · April 17th, 2014, 03:46 PM

Quote:

Originally Posted by Jiggyfly

see if I can remember all of the money I spent on it:
-Ohlins shock- NOT a standard shock. Custom built by Ohlins rep.
-emulators, springs, oil in the forks.
-Clip-ons (I think Vortex)
-Rearsets (CFM?)
-Hotbodies body work that has never been dropped, and is very nicely, professionally painted.
-EBC front rotor.
-braided lines, front and back
-Area P carbon canister full system
-Dynojet jet kit
-415 chain kit with a couple sprockets
-ignition key removed, and a toggle switch installed
-2 windscreens, double-bubble and standard
-Pirelli tires
-thermostat and fan deleted
-spin on gas cap
-SPARE set of wheels
-digital tire warmers
-race stand (cheap one, but works)
-lightened rear rotor

$2400

Email me, as I'm not here often since I'm not racing any more.

Shon_stanton@yahoo.com

Does it have a title?

Jiggyfly · April 17th, 2014, 04:19 PM

Quote:

Originally Posted by oblivion007

Does it have a title?

If I remember correctly it has a Virginia salvage title.
I'm sure I have it.

FastrnU · April 17th, 2014, 04:50 PM

I have a 300 motor for sale...

and I also will have a built 250 motor for sale as well after I get it off the dyno tomorrow

If youre interested, just let me know.

t-rav_12 · April 27th, 2014, 03:01 PM

I also have an '08 motor, carbs, intake, exhaust and gauge cluster from a donor bike I picked up with less than 1K. I don't need any of it for my '05 trackbike, and will let it go stupid cheap to see you breath life back into your trackbike. I'll give ya all that for $200.

abhijitz · May 10th, 2014, 07:28 AM

@Jiggyfly - any updates on the partout? Please check my email.

CZroe · May 10th, 2014, 09:20 AM

This is the bike I should have bought from you in the first place.

jmk420 · June 8th, 2014, 02:27 AM

Interested in part out? :P

Triple R · June 17th, 2014, 10:40 PM

If you're willing to part I'll take a few parts.

sowega · July 21st, 2014, 10:55 AM

Never heard back via email; is this still available?

April 15th, 2014, 09:41 PM	#1
Jiggyfly ninjette.org member Name: Shon Location: Columbia, sc Join Date: Oct 2011 Motorcycle(s): 2008 Kawasaki ninja 250 Posts: 132	2008+ Ninja 250 race roller It ate a motor at Daytona at the end of 2012, and has sat since. Very, very nice, great handling bike, that has everything to be competetive except an engine. Its pretty much completely toast.... but you're welcome to it! see if I can remember all of the money I spent on it: -Ohlins shock- NOT a standard shock. Custom built by Ohlins rep. -emulators, springs, oil in the forks. -Clip-ons (I think Vortex) -Rearsets (CFM?) -Hotbodies body work that has never been dropped, and is very nicely, professionally painted. -EBC front rotor. -braided lines, front and back -Area P carbon canister full system -Dynojet jet kit -415 chain kit with a couple sprockets -ignition key removed, and a toggle switch installed -2 windscreens, double-bubble and standard -Pirelli tires -thermostat and fan deleted -spin on gas cap -SPARE set of wheels -digital tire warmers -race stand (cheap one, but works) -lightened rear rotor if weight or friction could be removed or reduced, it was. I'm a mechanic by profession, and the bike is very nicely set up. The bike was never crashed, and I did very well on it. (2012 CCS SE Regional Champion, as well as a top 3 WERA bike at every round I attended, from the back of the grid.) The geometry was set up by Dave Moss, and handles, stops, and turns fabulously. You'll need nothing besides the obvious!! I have several small spares and extra parts. cables, bars, sprockets, cush drives, etc. You'll get everything I have for a Ninja 250. buy a $500 engine and go racing. $2400 I'm located in Columbia, SC..... and I could possibly help with delivery, or meeting, or whatever. Pics avaialble. I'll see what happens with this ad, and if theres no interest, I'll part it out....... PLEASE dont start asking now, or claiming parts. Email me, as I'm not here often since I'm not racing any more. Shon_stanton@yahoo.com

April 15th, 2014, 09:47 PM	#2
psych0hans ninjette.org certified postwhore Name: Hansveer Location: Bombay, India Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.	Someone needs to buy this and stuff a 300 motor in there... Real quick!!! __________________________________________________ GETTING BACK INTO RIDING? Read this.

May 10th, 2014, 07:28 AM	#7
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	@Jiggyfly - any updates on the partout? Please check my email. __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

July 21st, 2014, 10:55 AM	#11
sowega ninjette.org guru Name: Ed Location: Atlanta, GA Join Date: Mar 2011 Motorcycle(s): 899, 748, 250, 250, 70 Posts: 348	Never heard back via email; is this still available? __________________________________________________ Eberhart Creative

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2008 Ninja 250 Track/Race Bike - $2750 OBO	stimpee	Motorcycle-related	0	February 10th, 2015 07:37 PM
2008 Ninja 250 Race Bike $3,000	sandman889	Motorcycle-related	8	October 12th, 2014 08:21 AM

April 17th, 2014, 04:50 PM	#5
FastrnU Engine Room-> Dyno Name: Brandon Location: Lexington, SC Join Date: Mar 2013 Motorcycle(s): 08 YZFR6 Posts: 41	I have a 300 motor for sale... and I also will have a built 250 motor for sale as well after I get it off the dyno tomorrow If youre interested, just let me know.

April 27th, 2014, 03:01 PM	#6
t-rav_12 ninjette.org member Name: travis Location: Belton, Missouri, USA Join Date: Jul 2012 Motorcycle(s): '06 Ninja 2-Fitty (DD Commuter); '05 Ninja 2-Fitty (Track CCS#112); '94 YZF 7-FittyR (Missile/Backroad Bomber) Posts: 11	I also have an '08 motor, carbs, intake, exhaust and gauge cluster from a donor bike I picked up with less than 1K. I don't need any of it for my '05 trackbike, and will let it go stupid cheap to see you breath life back into your trackbike. I'll give ya all that for $200.

May 10th, 2014, 09:20 AM	#8
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	This is the bike I should have bought from you in the first place.

June 8th, 2014, 02:27 AM	#9
jmk420 ninjette.org member Name: Jeff Location: Vancouver Join Date: May 2013 Motorcycle(s): Diavel Carbon / Ninja 250R / 696 Posts: 32	Interested in part out? :P

June 17th, 2014, 10:40 PM	#10
Triple R ninjette.org member Name: D.Doan Location: Shark City Join Date: Jan 2013 Motorcycle(s): Suzuki's Posts: 40	If you're willing to part I'll take a few parts.