08' Ninja 250 Parts bike part out *you name the part and price* - Page 3

dubojr1 · October 13th, 2010, 05:32 AM

How about the speedo drive from the front wheel assembly? Part #14078 from here: http://www.cheapcycleparts.com/model...semblies/25692

BuckyNaked · October 13th, 2010, 02:51 PM

I've got the speedo drive available.

BuckyNaked · October 13th, 2010, 03:03 PM

Engine - $400 + shipping which looks to be roughly $200
No carbs but other than that good condition, 5k miles

Sprockets - Attempting to sell with rims

Rims Front- small dent and grind on rim
Rear - No dents but slight scratches from previous owner removing tires
Front is just rim and bearing
Rear comes with axle and all

Front rim

Rear sprocket

Rear rim

Ryan1990 · October 17th, 2010, 07:08 PM

still have the rear brake bracket? pm me if so

BuckyNaked · October 28th, 2010, 04:37 PM

No rear bracket. But BIZUMP willing to go lower on all prices to!!! Got a couple winter projects in the works and I could use the extra room/cash!!!

wellcraft · October 28th, 2010, 04:41 PM

How about the front and rear rotor, never got a response?

BuckyNaked · October 28th, 2010, 04:51 PM

Sorry, I originally wanted to sale the rims rotor and all. But if I can get them off I'd give you them both for $110 shipped. That reasonable?

Godzilla35 · October 29th, 2010, 10:37 AM

hey brandon, do you have the rubber strap that holds a black box on the left side? sorry, i have no idea what to call this or describe it, but I can take a pic if you don't know what i'm talking about...

BuckyNaked · October 29th, 2010, 01:16 PM

Like the piece the ECU fits into?

Godzilla35 · October 29th, 2010, 01:36 PM

it's like this black block... and honestly, it was just dangling the other day as I was going to my car and I noticed the rubber strap that was holding it before was quite weathered... if you know what i'm talking about let me know how much it is.. if not, i can take a pic of my bike later

BuckyNaked · October 29th, 2010, 01:39 PM

I think I know what it is, but shoot me a pic later to verify.

Godzilla35 · October 29th, 2010, 02:57 PM

I took pics... what's your email?

also,

do you have the little washer that fits onto the frame that connects to the back of the tail plastics?

if you go to cheapcycleparts.com
under side covers / chain cover... I believe it's part #92210

maichang · November 6th, 2010, 06:12 AM

er...do u have passenger footrest bolts and footrest sets?

BuckyNaked · November 6th, 2010, 09:52 AM

Got both passenger sets in great condition $70 shipped with hardware included

Angel-be-Good · November 13th, 2010, 11:15 PM

You still have the front brake master/lever?

BuckyNaked · November 14th, 2010, 11:31 AM

I've got the front master, the lever is broken tho

Angel-be-Good · November 14th, 2010, 02:35 PM

How much for the master sans lever then?

BuckyNaked · November 14th, 2010, 02:51 PM

Angel, I actually got a PM yesterday about the master that I didn't notice until after I replied to your post. The sale is pending, but if it doesn't go through it's $40 shipped.

Momaru · November 14th, 2010, 03:29 PM

Howsabout the left-hand electrical control box (horn, hibeams, blinkers)?

BuckyNaked · November 14th, 2010, 03:35 PM

I don't have any of the controls

spooph · November 14th, 2010, 04:34 PM

What about the front fender?

edit: sorry if I missed it, but how much for the rims?

Momaru · November 14th, 2010, 04:56 PM

Ok, thanks anyhow. Sorry if you've already mentioned that; had an 'oops' working on that control box this afternoon and trying to quickly find a replacement so I must admit with some shame to not reading the whole thread.

tim61 · November 14th, 2010, 07:45 PM

Quote:

Originally Posted by BuckyNaked

I'll let them go for $200 shipped

Are the wheels still available? Thanks,
Tim

BuckyNaked · November 14th, 2010, 09:42 PM

I don't have a front fender, but esi7esi7 has one up for sale.

The wheels are pending sale and $100 shipped each. There's pics posted of the scratches and nicks in them. I think the front rim has a slight dent in it, when i roll it it catches on a little spot.

BuckyNaked · November 15th, 2010, 04:26 PM

Front master is sold, may have another one if I can figure out a way to delete it on my bike.

pugs24 · November 15th, 2010, 05:32 PM

Bucky,

Do you have the right turn signal with plastic stem and the right mirror?

Thanks,

Joey

Bl4kkat · July 12th, 2011, 02:01 PM

Hey I was wondering do u still have the gas tank? And would u know it it'll fit my 93'?

Thanks

October 13th, 2010, 05:32 AM	#81
dubojr1 ninjette.org certified postwhore Name: Jason Location: Jacksonville, Florida Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.	How about the speedo drive from the front wheel assembly? Part #14078 from here: http://www.cheapcycleparts.com/model...semblies/25692 __________________________________________________ 09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map

November 13th, 2010, 11:15 PM	#95
Angel-be-Good ninjette.org guru Name: Ryan Location: San Francisco Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250, '11 Street Triple R Posts: 337	You still have the front brake master/lever? __________________________________________________ The Sunday Best \| Current mileage: 50,000

November 14th, 2010, 02:35 PM	#97
Angel-be-Good ninjette.org guru Name: Ryan Location: San Francisco Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250, '11 Street Triple R Posts: 337	How much for the master sans lever then? __________________________________________________ The Sunday Best \| Current mileage: 50,000

November 14th, 2010, 03:29 PM	#99
Momaru ninjette.org certified postwhore Name: Paul Location: Roanoke, VA Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.	Howsabout the left-hand electrical control box (horn, hibeams, blinkers)? __________________________________________________ Proud member of the Blue Army

November 14th, 2010, 04:34 PM	#101
spooph ninjette.org certified postwhore Name: Spooph Location: Golden, CO Join Date: Jul 2010 Motorcycle(s): '08 Ninja 250R Posts: A lot. MOTM - Oct '15	What about the front fender? edit: sorry if I missed it, but how much for the rims? __________________________________________________ My therapist has 2 wheels and a seat. If you are ever in doubt to my tone, please refer to my avatar. Last futzed with by spooph; November 14th, 2010 at 05:52 PM.

October 13th, 2010, 02:51 PM	#82
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	I've got the speedo drive available.

October 13th, 2010, 03:03 PM	#83
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	Engine - $400 + shipping which looks to be roughly $200 No carbs but other than that good condition, 5k miles Sprockets - Attempting to sell with rims Rims Front- small dent and grind on rim Rear - No dents but slight scratches from previous owner removing tires Front is just rim and bearing Rear comes with axle and all Front rim Rear sprocket Rear rim

October 17th, 2010, 07:08 PM	#84
Ryan1990 ninjette.org newbie Name: Ryan Location: oklahoma Join Date: Oct 2010 Motorcycle(s): 08 red 250 ninja Posts: 1	still have the rear brake bracket? pm me if so

October 28th, 2010, 04:37 PM	#85
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	No rear bracket. But BIZUMP willing to go lower on all prices to!!! Got a couple winter projects in the works and I could use the extra room/cash!!!

October 28th, 2010, 04:41 PM	#86
wellcraft ninjette.org guru Name: JR Location: Augusta, GA Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432	How about the front and rear rotor, never got a response?

October 28th, 2010, 04:51 PM	#87
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	Sorry, I originally wanted to sale the rims rotor and all. But if I can get them off I'd give you them both for $110 shipped. That reasonable?

October 29th, 2010, 10:37 AM	#88
Godzilla35 ninjette.org member Name: poop Location: San Diego, California Join Date: Sep 2010 Motorcycle(s): Nike Hyperdunks Posts: 116	hey brandon, do you have the rubber strap that holds a black box on the left side? sorry, i have no idea what to call this or describe it, but I can take a pic if you don't know what i'm talking about...

October 29th, 2010, 01:16 PM	#89
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	Like the piece the ECU fits into?

October 29th, 2010, 01:36 PM	#90
Godzilla35 ninjette.org member Name: poop Location: San Diego, California Join Date: Sep 2010 Motorcycle(s): Nike Hyperdunks Posts: 116	it's like this black block... and honestly, it was just dangling the other day as I was going to my car and I noticed the rubber strap that was holding it before was quite weathered... if you know what i'm talking about let me know how much it is.. if not, i can take a pic of my bike later

October 29th, 2010, 01:39 PM	#91
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	I think I know what it is, but shoot me a pic later to verify.

October 29th, 2010, 02:57 PM	#92
Godzilla35 ninjette.org member Name: poop Location: San Diego, California Join Date: Sep 2010 Motorcycle(s): Nike Hyperdunks Posts: 116	I took pics... what's your email? also, do you have the little washer that fits onto the frame that connects to the back of the tail plastics? if you go to cheapcycleparts.com under side covers / chain cover... I believe it's part #92210

November 6th, 2010, 06:12 AM	#93
maichang ninjette.org newbie Name: maichang Location: Berkeley Join Date: Oct 2010 Motorcycle(s): 08 250r Posts: 9	er...do u have passenger footrest bolts and footrest sets?

November 6th, 2010, 09:52 AM	#94
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	Got both passenger sets in great condition $70 shipped with hardware included

November 14th, 2010, 11:31 AM	#96
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	I've got the front master, the lever is broken tho

November 14th, 2010, 02:51 PM	#98
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	Angel, I actually got a PM yesterday about the master that I didn't notice until after I replied to your post. The sale is pending, but if it doesn't go through it's $40 shipped.

November 14th, 2010, 03:35 PM	#100
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	I don't have any of the controls

November 14th, 2010, 04:56 PM	#102
Momaru ninjette.org certified postwhore Name: Paul Location: Roanoke, VA Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.	Ok, thanks anyhow. Sorry if you've already mentioned that; had an 'oops' working on that control box this afternoon and trying to quickly find a replacement so I must admit with some shame to not reading the whole thread. __________________________________________________ Proud member of the Blue Army

November 14th, 2010, 09:42 PM	#104
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	I don't have a front fender, but esi7esi7 has one up for sale. The wheels are pending sale and $100 shipped each. There's pics posted of the scratches and nicks in them. I think the front rim has a slight dent in it, when i roll it it catches on a little spot. Last futzed with by BuckyNaked; November 15th, 2010 at 04:25 PM.

November 15th, 2010, 04:26 PM	#105
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	Front master is sold, may have another one if I can figure out a way to delete it on my bike.

November 15th, 2010, 05:32 PM	#106
pugs24 ninjette.org member Name: Joey Location: Romeo, MI Join Date: Nov 2010 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 45	Bucky, Do you have the right turn signal with plastic stem and the right mirror? Thanks, Joey

July 12th, 2011, 02:01 PM	#107
Bl4kkat ninjette.org newbie Name: Mark Location: VA Beach Join Date: Jul 2011 Motorcycle(s): 93' 250 Ninja Posts: 5	Hey I was wondering do u still have the gas tank? And would u know it it'll fit my 93'? Thanks __________________________________________________ .:LUMiNUS MAXiMA:.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS?	PartsNinja	Motorcycle-related	75	October 23rd, 2016 04:08 PM
Ordering parts by part number	nitehawk	2008 - 2012 Ninja 250R Tech Talk	4	August 29th, 2013 10:07 AM
What is a good price for a bike for parts?	ally99	Motorcycle-related	10	February 23rd, 2013 12:17 PM
Pre Gen Part bike part out	A7xschecter6661	Motorcycle-related	28	July 5th, 2012 12:49 PM
Front Seat Part Number/Price?	setasai	Items Wanted	4	September 1st, 2010 08:07 PM