ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Reply
 
Thread Tools
Old April 19th, 2020, 06:14 PM   #1
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
'08-'12 Parts lots of parts for sale

I've got lots of parts for sale off two Newgen (08-12) engines, and replacement upgrades that never got installed. I've finally gotten around to cataloging the parts. PM me if you have questions or are interested in anything. We can discuss price and I can send pics on request.

2 Bulbs, 12V 10W (Never installed --- PN 92069-0024)
1 OEM headlight bulb H7 (good bulb taken off bike for upgrade)
1 Silverstar headlight bulb H7 (good bulb taken off bike)
1 EBC Clutch Plate set (Have been pre-soaked in oil, but never installed) - SOLD
1 WPS Clutch Spring Set - Heavy Duty (Never installed --- PN CK4521) - SOLD
1 ALL BALLS Front Wheel Bearing and seal kit (Never installed --- PN 25-1444)
1 ALL BALLS Steering Bearing and seal kit (Aborted install - will guarantee condition --- PN 22-1014)
1 Front brake line (Removed to upgrade)
1 Clutch Cover Gasket --- PN 11009-1872
1 BRT CDI w/ switch (2 presets, standard and racing tune)
1 EBC Front Brake Rotor, Pro-Lite Contour, XC Disc (Never installed --- PN MD4162XC)
1 EBC Rear Brake Rotor, Contour (Never installed --- PN MD4163C)
1 Engine head w/valve assemblies (Camshafts not included)
1 Valve cover
2 Clutch cover
1 Oil drain cover and screen assembly
1 Shift pedal
2 Oil filter assembly
1 Camshaft (intake)
2 Camshaft (exhaust)
1 Cam chain
1 MANUAL adjust cam chain tensioner
1 Bar ends (pair)
2 Complete Clutch Basked assemblies with plates
2 Alternator Rotor/Flywheel/Starter Clutch (with Starter Gear)
1 Starter Motor (Bench tested)
1 Front sprocket cover - SOLD
2 Stator/Alternator and cover assemblies
2 Ignition coils
1 Carburetor assembly (includes extra jets)
1 Carb diaphragm slide (drilled for slide mod)
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned

Last futzed with by headshrink; June 9th, 2020 at 11:41 AM.
headshrink is offline   Reply With Quote




Old May 17th, 2020, 03:29 PM   #2
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Bump before posting to Ebay. Parts will go cheaper to Ninjette members.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned
headshrink is offline   Reply With Quote


Old May 18th, 2020, 12:21 AM   #3
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T EX250E EX250F Ninja250R-racer Ninja250R-street CBR250R-MC19 CBR250RR-MC22 NSR350R VF500 CBR600RR VFR750

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
I'm interested in:

1 EBC Clutch Plate set (Have been pre-soaked in oil, but never installed)
1 Front sprocket cover
DannoXYZ is offline   Reply With Quote


Old May 18th, 2020, 11:35 AM   #4
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Quote:
Originally Posted by DannoXYZ View Post
I'm interested in:

1 EBC Clutch Plate set (Have been pre-soaked in oil, but never installed)
1 Front sprocket cover
I just sent you a PM.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned
headshrink is offline   Reply With Quote


Old May 18th, 2020, 01:02 PM   #5
sumbee
ninjette.org newbie
 
Name: Sum
Location: Vancouver, BC
Join Date: Sep 2017

Motorcycle(s): Ninja 250 Track Bike

Posts: 1
1) Is the 1 Camshaft (intake) and the 2 Camshaft (exhaust) OEM or aftermarket. If aftermarket, how many miles are on them, raced or street used, pictures, make andspecs of the cam, and anything of importance that I haven't asked.

2) how much for 1 EBC Front Brake Rotor, Pro-Lite Contour, XC Disc (Never installed --- PN MD4162XC) and picture?

2) how much for 1 EBC Rear Brake Rotor, Contour (Never installed --- PN MD4163C) and picture?

Thanks.
sumbee is offline   Reply With Quote


Old May 19th, 2020, 12:35 PM   #6
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Quote:
Originally Posted by sumbee View Post
1) Is the 1 Camshaft (intake) and the 2 Camshaft (exhaust) OEM or aftermarket. If aftermarket, how many miles are on them, raced or street used, pictures, make andspecs of the cam, and anything of importance that I haven't asked.

2) how much for 1 EBC Front Brake Rotor, Pro-Lite Contour, XC Disc (Never installed --- PN MD4162XC) and picture?

2) how much for 1 EBC Rear Brake Rotor, Contour (Never installed --- PN MD4163C) and picture?

Thanks.
Camshafts are all OEM
I'll send you a PM to figure out other details since you're out of the country. I'll post the pics you requested shortly.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned
headshrink is offline   Reply With Quote


Old May 19th, 2020, 01:03 PM   #7
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Requested pics of the rotors:

__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned
headshrink is offline   Reply With Quote


Old November 19th, 2020, 12:24 AM   #8
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Since it's been too long to edit OP, here's what's still available:

2 Bulbs, 12V 10W (Never installed --- PN 92069-0024)
1 OEM headlight bulb H7 (good bulb taken off bike for upgrade)
1 Silverstar headlight bulb H7 (good bulb taken off bike)
1 ALL BALLS Front Wheel Bearing and seal kit (Never installed --- PN 25-1444)
1 Front brake line (Removed to upgrade)
1 Clutch Cover Gasket --- PN 11009-1872
1 Engine head w/valve assemblies (Camshafts not included)
1 Valve cover
2 Clutch cover
1 Oil drain cover and screen assembly
1 Shift pedal
2 Oil filter assembly
1 Camshaft (intake)
2 Camshaft (exhaust)
1 Cam chain
1 Bar ends (pair)
2 Complete Clutch Basked assemblies with plates
2 Alternator Rotor/Flywheel/Starter Clutch (with Starter Gear)
1 Starter Motor (Bench tested)
2 Stator/Alternator and cover assemblies
2 Ignition coils
1 Carburetor assembly (includes extra jets)
1 Carb diaphragm slide (drilled for slide mod)
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned

Last futzed with by headshrink; December 1st, 2020 at 11:50 PM. Reason: sales
headshrink is offline   Reply With Quote


Old November 19th, 2020, 02:04 AM   #9
Singh2jz
ninjette.org certified postwhore
 
Singh2jz's Avatar
 
Name: Inderveer
Location: San Jose
Join Date: Nov 2012

Motorcycle(s): '07 ex250-F/J

Posts: A lot.
PM sent!
__________________________________________________
The Bike | The Truck
Singh2jz is offline   Reply With Quote


Old April 12th, 2021, 05:53 PM   #10
Speedmon
ninjette.org newbie
 
Name: Claude
Location: Chennai,India
Join Date: Oct 2020

Motorcycle(s): Ninja 250r,crf230

Posts: 1
are the rotors still available , how much for the pair to a US/canada(vancouver) address ?
Speedmon is offline   Reply With Quote


Old April 13th, 2021, 09:50 AM   #11
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Rotors have been sold. There is an updated list above.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned
headshrink is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Lots of race parts for sale!! ninja-turtle Motorcycle-related 6 June 24th, 2019 10:20 AM
Lots of Pregen Parts HoneyBadgerRy Items Wanted 0 October 20th, 2015 11:03 AM
Lots of 300 and newgen parts for sale! LittleRedNinjette Motorcycle-related 21 September 22nd, 2014 01:20 PM
2009 Ninja parts - all street parts for sale krunkfoo Motorcycle-related 52 July 26th, 2013 07:55 PM
Wtb: Lots of parts 08+ t1m0xa Items Wanted 4 December 31st, 2012 06:08 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:15 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2021 ninjette.org, All rights reserved.