ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Farkles

Reply
 
Thread Tools
Old September 7th, 2011, 12:18 AM   #1
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
Koso RX2 Gauge with voltmeter?

I am looking for the Koso RX2 gauge with voltmeter. I have found the gauge itself but not the voltmeter along with it. Also I am not sure if it will fit on the bike with no other mods needed or if I have to restructure the mounts to it will fit.
Boomstick is offline   Reply With Quote




Old September 7th, 2011, 12:31 AM   #2
rusninja
Ninjette wanabe :D
 
rusninja's Avatar
 
Name: Ruslan
Location: San Jose
Join Date: Apr 2011

Motorcycle(s): white 300 :D

Posts: A lot.
Most or all voltmeter koso dashs come out from indonesia.
__________________________________________________
VROOOM vrooom >.>
rusninja is offline   Reply With Quote


Old September 7th, 2011, 07:44 PM   #3
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
I have found them all over the place. But I cant find the voltmeters along with it
Boomstick is offline   Reply With Quote


Old September 7th, 2011, 08:44 PM   #4
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
dont think the "kits" with the voltmeter, and custom brackets are available in the states yet. ive send like 4 kits to the states so far, and 2 custom dashboards for ppl that already owned the speedo itself, but didnt like the koso dash.

http://youtu.be/K4mB_OmGezc
thats the last one i sent over to california, posted a short vid of it starting up.


the price (excluding shipping) is:

koso RX2N/RX2N + custom bracket + voltmeter) = $410
koso RX2N/RX2N + custom bracket) = $350

this price is including a 15% mark up, more than half of which gets gobbled up by PayPal...









one person wanted the voltmeter, while the other 2 didnt want it, when i bought these three during a GB.

W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 7th, 2011, 09:00 PM   #5
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
lol so is there a place that sells them?
Boomstick is offline   Reply With Quote


Old September 7th, 2011, 09:08 PM   #6
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
in america? not that im aware of... but i could be wrong, since i have never looked for anyone selling them there. although i am surprised that no one is selling these kits over there already, since there would be a reasonably big demand for them if it were available.

so you would still have to get it from here in Indonesia at this point in time.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 7th, 2011, 09:10 PM   #7
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
you have a link? I can get the RX2 from almost any website that sells bike stuff. But I can not find it with the voltmeter..
Boomstick is offline   Reply With Quote


Old September 7th, 2011, 09:16 PM   #8
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
the voltmeter is from Koso too actually, if you google "koso voltmeter" you get pictures of the same one that i get with the kits here. not sure what the item# is, i think you can find that or even a place to buy it online if you look through some of those links.

as reference, i think i can get the voltmeter for about $68 here. and the custom fiberglass bracket costs about the same.

gl!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 7th, 2011, 09:26 PM   #9
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
thanks. ill keep my eye out but have yet to find it..
Boomstick is offline   Reply With Quote


Old September 8th, 2011, 02:28 AM   #10
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
if you go to:
http://www.kosonorthamerica.com/

then select motorcycle parts, and go on page 4, there is a voltmeter that looks the same, just that the color of the light is Blue, rather than red.

item: DL-01 VOLT METER
Code: BA484B30

however its still: Available soon...
and way more expensive! $159.95
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 8th, 2011, 07:10 AM   #11
dubojr1
ninjette.org certified postwhore
 
dubojr1's Avatar
 
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010

Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F

Posts: A lot.
Nelson: Wayan is trying to tell you he can get everything you need. It just has to come from Indonesia and be shipped to the States. No biggie. I ordered one from him and I ABSOLUTELY LOVE IT!
__________________________________________________
09 250R SE: Paying it forward one post at a time!

Don't forget to add yourself to our Member Map
dubojr1 is offline   Reply With Quote


Old September 8th, 2011, 09:27 AM   #12
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
noooooo... i wasn't trying to say that! lol....

well maybe i was hinting that it is possible to get it from here if he wasn't able to get it any other way,

the option is there, but it would be easier if it were available over there. int. shipping sorta hurts the wallet >.<
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 8th, 2011, 10:40 AM   #13
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
hahaha well thank you for the offer wayan, and thanks again for the link. that site seems to be absolutely perfect! When you order the RX2 does it come with the mount and brackets and everything so that the voltmeter can be installed along with it or is their more that has to be ordered
Boomstick is offline   Reply With Quote


Old September 8th, 2011, 06:12 PM   #14
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
the standard koso dash looks like this:


(gear indicator is optional, and only works with EFI models)

while the custom bracket we get made here in indonesia looks like this:



so you cant fit the voltmeter on koso's bezel, unless they have made some recent changes that im not aware of~

W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 8th, 2011, 11:12 PM   #15
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
alright just to humor me, do you know how much it is for the koso gauge along with the voltmeter and the whole nine yards? and if you know how much it would be to ship to the states roughly. bc so far I cant find that whole setup around here or on the web
Boomstick is offline   Reply With Quote


Old September 8th, 2011, 11:59 PM   #16
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
scroll up to link #4,

or click on this link if thats easier, lolz

http://www.ninjette.org/forums/showp...36&postcount=4

i already posted it the other day.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 9th, 2011, 12:02 AM   #17
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
haha yea im blind. Anyway, does that include everything I will need to install it? It says something about already having the speedo, I am mechanically retarded so forgive me if im asking dumb questions, so im not sure if i will need anything else. And how do I go about buying it? from you?
Boomstick is offline   Reply With Quote


Old September 9th, 2011, 12:28 AM   #18
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
its a Plug and play kit. you only have to plug in the 2 temp sensors (water and oil), run a cable to the battery for the power source, and a cable down the front forks to the magnet sensor for the speed reeading.

the only "mechanical" thing you will really need to do is remove the side and front farings, to remove the old speedo, and bolt in the new kit.

as long as you have a set of allenkeys you are basically set!

the rest is set up on the koso, you need to dial in that its a 4 stroke engine, 2 pistons, number of magnets, radius of the front wheel, the time, and then your set.

o ya, u need a wrench to install the temp sensors, hehe
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 9th, 2011, 12:33 AM   #19
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
Perfect! How can I get one? Looks like payin to ship it to the states is the only way to go. So im ready to order
Boomstick is offline   Reply With Quote


Old September 9th, 2011, 02:13 AM   #20
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
what might be the cheaper and more secure solution would be to just buy the custom bracket and the voltmeter from here, and buy the Koso speedometer in america. they also have a P&P harnes kit for the ninja250.

the only difference is that you will need to splice in the voltmeter yourself. the rest should be roughly the same.

that would cost $145 for the voltmeter and bracket only. this would make the shipping cheaper too, since it would be much lighter, than sending the whole kit.

that's another idea for you to consider.

W
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 9th, 2011, 01:13 PM   #21
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
No that absolutely sounds like a good plan. Would it be easy to buy the harness from over there as well. Or will come with the koso gauge?
Boomstick is offline   Reply With Quote


Old September 9th, 2011, 01:35 PM   #22
gt_turbo
ninjette.org sage
 
gt_turbo's Avatar
 
Name: L
Location: WI
Join Date: Apr 2011

Motorcycle(s): '09 250R, '13 CBR500R

Posts: 709
the harness can be bought in the states for $50.

http://cgi.ebay.com/ebaymotors/KOSO-...item5645bb4f1b

koso RX-2 gauge can be had here for ~ $300

http://www.biohazardcycles.com/servl...DOMETER/Detail

so that's ~$350 + $150 (bezel + voltmeter not including shipping from Wayan). so roughly $500 total and no shipping costs from indo included yet. at this point i'd rather say just buy it COMPLETE from Wayan and pay international shipping. LOL. there was a GB for the Koso gauges headed up by Outlander. Not sure if it's complete or still going on.
gt_turbo is offline   Reply With Quote


Old September 9th, 2011, 02:11 PM   #23
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
thank GT that will be what I will do!

Wayan is there a company that sells this stuff over there or who do I cut a check too so to speak
Boomstick is offline   Reply With Quote


Old September 9th, 2011, 06:10 PM   #24
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
no company here "exports" these so to speak. i buy the kits from a shop, test them, pack them properly and send them out by DHL or whatever you choose for the shipping.

i can accept PayPal, which is something that almost no one here in indonesia accepts.

i havent send a single Koso Kit by DHL, the other times i sent them was bundled up with other bits, so i cant give a price in advance for that until i get DHL to price it.

there is also a insurance % that is charged on top by dhl. for the last package i declared the goods at half (or quarter) the price, since it was over $1000 worth of goods, and it would have cost another $50 for the insurance... thats also something that you can decide once we get the shipping price by DHL.

you might want to join the GB, which is still in a bit of a limbo, which Outlander is heading up from the state side. im just waiting for the green light, and the $$ before i do anything on my end.

i cant find the thread tho... post there and i should get a notification if you find it, hehe.

enjoy your week end!
W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old September 11th, 2011, 03:43 PM   #25
Boomstick
ninjette.org member
 
Boomstick's Avatar
 
Name: Nelson
Location: Jackson MI
Join Date: Aug 2011

Motorcycle(s): 2010 Ninja 250R SE

Posts: 41
alright well let me get something things in order over here and i will PM you for the details of what needs to happen from here
Boomstick is offline   Reply With Quote


Old June 21st, 2012, 09:41 AM   #26
lamchops
ಠ_ಠ
 
lamchops's Avatar
 
Name: Janelle
Location: Hawaii
Join Date: May 2012

Motorcycle(s): current newbie stick is a loaner :P

Posts: 257
Quote:
Originally Posted by wayanlam View Post
the standard koso dash looks like this:


(gear indicator is optional, and only works with EFI models)
Do the two blank 'button-like' things below the speedo have a function? e.g. for additional indicators?
I really like the RX-2 for the ability to change backlight, but am hating the asymmetry of it.
Would a model like the RX-1N need a bezel?

__________________________________________________
a fast ride isn't necessarily a fun ride ;3
lamchops is offline   Reply With Quote


Old June 21st, 2012, 10:01 AM   #27
dubojr1
ninjette.org certified postwhore
 
dubojr1's Avatar
 
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010

Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F

Posts: A lot.
Quote:
Originally Posted by lamchops View Post
Do the two blank 'button-like' things below the speedo have a function? e.g. for additional indicators?
I really like the RX-2 for the ability to change backlight, but am hating the asymmetry of it.
Would a model like the RX-1N need a bezel?

Those are function buttons to go thru the menu and select settings and such. They also switch between oil or water temp displayed ,reset the trip meter, etc.
__________________________________________________
09 250R SE: Paying it forward one post at a time!

Don't forget to add yourself to our Member Map
dubojr1 is offline   Reply With Quote


Old June 21st, 2012, 10:05 AM   #28
jman511115
ninjette.org member
 
Name: John
Location: Buffalo NY
Join Date: Sep 2009

Motorcycle(s): Ninja

Posts: 122
Quote:
Originally Posted by lamchops View Post
Do the two blank 'button-like' things below the speedo have a function? e.g. for additional indicators?
I really like the RX-2 for the ability to change backlight, but am hating the asymmetry of it.
Would a model like the RX-1N need a bezel?

They're function buttons.
jman511115 is offline   Reply With Quote


Old June 21st, 2012, 10:42 AM   #29
lamchops
ಠ_ಠ
 
lamchops's Avatar
 
Name: Janelle
Location: Hawaii
Join Date: May 2012

Motorcycle(s): current newbie stick is a loaner :P

Posts: 257
Quote:
Originally Posted by dubojr1 View Post
Those are function buttons to go thru the menu and select settings and such. They also switch between oil or water temp displayed ,reset the trip meter, etc.
Quote:
Originally Posted by jman511115 View Post
They're function buttons.
Oooh. Thanks
How about that bezel? o_O
__________________________________________________
a fast ride isn't necessarily a fun ride ;3
lamchops is offline   Reply With Quote


Old June 21st, 2012, 12:30 PM   #30
lamchops
ಠ_ಠ
 
lamchops's Avatar
 
Name: Janelle
Location: Hawaii
Join Date: May 2012

Motorcycle(s): current newbie stick is a loaner :P

Posts: 257
Woah... Whoops. Didn't mean to revive a dead thread. :S
__________________________________________________
a fast ride isn't necessarily a fun ride ;3
lamchops is offline   Reply With Quote


Old June 21st, 2012, 12:33 PM   #31
dubojr1
ninjette.org certified postwhore
 
dubojr1's Avatar
 
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010

Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F

Posts: A lot.
No thread is dead unless it is closed.
__________________________________________________
09 250R SE: Paying it forward one post at a time!

Don't forget to add yourself to our Member Map
dubojr1 is offline   Reply With Quote


Old June 7th, 2017, 02:50 AM   #32
EscoVictorious
ninjette.org newbie
 
Name: Victor
Location: Canada
Join Date: Jun 2017

Motorcycle(s): Ninja 250r

Posts: 2
still selling? i need a place to put my air/fuel ratio gauge. and that voltmeter spot looks perfect since i think the voltmeter is kind of useless. can i just get the koso rx2 with the mount with that space to the left? i can drill a hole for my current a/f r guage myself =D

and how do i reach you?
EscoVictorious is offline   Reply With Quote


Old June 12th, 2017, 08:50 AM   #33
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
Heya, would you be getting the Koso gauge from Koso USA? i find that to be the easier solution, if i just need to order and ship the bezel.

i would have to check again what they cost but if your interested i can look into it. last time i sent a bracket for a fellow member, Steve, that was back in April 2016. it cost $50 for a bracket, and shipping to Long Beach, NJ.

can email me at wayanlam@gmail.com


Quote:
Originally Posted by EscoVictorious View Post
still selling? i need a place to put my air/fuel ratio gauge. and that voltmeter spot looks perfect since i think the voltmeter is kind of useless. can i just get the koso rx2 with the mount with that space to the left? i can drill a hole for my current a/f r guage myself =D

and how do i reach you?
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Koso Rx1 or Rx2 gauge contents and extras? Daakuryu 2008 - 2012 Ninja 250R Farkles 12 April 12th, 2021 12:13 PM
need help with koso gauge Old Lemon 2008 - 2012 Ninja 250R Tech Talk 8 August 13th, 2012 01:04 PM
How long have you had your Koso gauge? CThunder-blue 2008 - 2012 Ninja 250R Farkles 8 July 10th, 2012 01:40 PM
Koso gauge randomwalk101 Motorcycle-related 7 November 5th, 2010 07:28 PM
Koso gauge kit GB wellcraft Motorcycle-related 56 April 29th, 2010 07:31 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 11:06 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2021 ninjette.org, All rights reserved.