September 9th, 2010, 01:07 AM | #1 |
ninjette.org member
Name: Neil
Location: Whitney Texas
Join Date: Jul 2010 Motorcycle(s): Kawasaki Ninja Posts: 12
|
koso gauges
does any one know of any gauges for the ninja i saw some koso gauges but i do not know which ones to buy
|
|
September 9th, 2010, 01:24 AM | #2 |
ninjette.org member
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110
|
|
|
September 9th, 2010, 04:20 AM | #3 |
ninjette.org member
Name: Andrew
Location: Aberdeen
Join Date: Aug 2010 Motorcycle(s): None yet - Hopefully a ninjette when I get my licence :D Posts: 33
|
|
|
September 9th, 2010, 05:39 AM | #4 |
ninjette.org newbie
Name: Victor
Location: Sydney, Australia
Join Date: Sep 2010 Motorcycle(s): 2010 Ninja 250R SE Posts: 2
|
i'm planning for that gauge as well, aren't they plug-and-play tho?
|
|
September 9th, 2010, 06:38 AM | #5 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
|
|
September 9th, 2010, 06:56 AM | #6 |
ex-ninjette.org guru :o
Name: Trevor
Location: Barrie, Ontario
Join Date: Jun 2010 Motorcycle(s): 2003 SV1000 S Posts: 475
|
damn that looks awesome, one question tho, were you able to program the odometer on it?
|
|
September 9th, 2010, 06:59 AM | #7 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Do they make the Koso gauges for the pregens? That is one awesome looking set-up.
|
|
September 9th, 2010, 01:15 PM | #8 |
ninjette.org member
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110
|
yeah the are plug and play harness, put the fuel gauge is on the gauge. there is a supplied low fuel light that you can hook up. i want the fuel gauge to work on the koso unit so i rewired it harness.
no couldnt reprogram the odometer. |
|
September 9th, 2010, 05:58 PM | #9 | |
ninjette.org member
Name: Neil
Location: Whitney Texas
Join Date: Jul 2010 Motorcycle(s): Kawasaki Ninja Posts: 12
|
Quote:
Posted via Mobile Device |
|
|
September 9th, 2010, 06:46 PM | #10 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
You can send the gauge to Koso USA and they will put whatever millage you want on the gauge, it had a cost but I have no idea how much. I spoke to them a while back about this and they said no problem.
Posted via Mobile Device Last futzed with by wellcraft; September 10th, 2010 at 11:09 AM. |
|
September 9th, 2010, 06:50 PM | #11 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
Btw, I have one but is the Sportisi version and it looks a lot more decent than the koso bezel. The koso bezel is totally flat and the Sportisi version has some conture on it.
I'll. Try to take some pics and post them here, I haven't installed the gauge yet. Posted via Mobile Device Last futzed with by wellcraft; September 10th, 2010 at 11:09 AM. |
|
September 10th, 2010, 02:59 AM | #12 |
ninjette.org member
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110
|
Last futzed with by dyeforever; September 12th, 2010 at 02:25 AM. |
|
September 10th, 2010, 03:50 AM | #13 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
It is so cool to see the plug and play kit for the 250 Ninja. I first did this in 2008 and have had so much response. It is the most popular page on New Ninja.com with over 12000 views.
http://www.newninja.com/modifications/koso-dash/ Koso copied my kit and now it is plug and play..How cool is that? If anyone has any trouble or wants to adapt one of these dash panels to a first gen bike .Just PM me and I will be glad to help out with wiring it up . |
|
September 10th, 2010, 08:34 AM | #14 |
ninjette.org member
Name: b
Location: midwest
Join Date: Jun 2010 Motorcycle(s): 2008 ninja 250r Posts: 119
|
i watched that vid and now im in love with that gauge setup
|
|
September 10th, 2010, 09:55 AM | #15 |
ninjette.org member
Name: Scott
Location: Delaware
Join Date: Jul 2009 Motorcycle(s): 2008 Ninja 250r(sold), 2007 650R (sold), 2013 Ninja 300 Posts: 199
|
Definitely looks sweet, more of a want then a need though. This would look nice with that shinto painted or CF dash
|
|
September 10th, 2010, 10:59 AM | #16 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
Koso Gauge Kit from Sportisi
Here is the Koso RX2 kit from Sportisi. In my opinion a lot better looking kit from the original koso bezel. BTW the kit came with a different 2 inch gauge, I had that one laying around and replaced with this one to see how it looks. The bezel is made of fiber glass. and the koso gauge fit there very nicely. I hope I can install the gauge in a couple of weeks. it's been laying around in the box for a few month now.
|
|
September 10th, 2010, 04:38 PM | #17 |
ninjette.org member
Name: Kyle
Location: Silver City
Join Date: Jul 2009 Motorcycle(s): Kawasaki Ninja 250r Posts: 79
|
The koso gauge is truely an upgrade from stock. as far as the odometer goes it comes brand new so it starts at zero. I read somewhere that they can program it fro you ahead of time....the plug and play kit should be great...I went with racer x and fabricated my own plate. I love the gauge. Made an ipod mount on the dash right next to the gauge so I can change songs, up volume, etc right in front of me without getting it out of my pocket.
|
|
September 10th, 2010, 06:33 PM | #18 |
ninjette.org member
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110
|
The koso is a great upgrade for the ninja. have a water temp and clock are so great. like the sportisi one, not sure what i would use the extra gauge hole for. wideband maybe.
|
|
September 23rd, 2010, 07:16 PM | #19 |
ninjette.org member
Name: carlos
Location: long beach
Join Date: Sep 2010 Motorcycle(s): 2010 ninja 250r Posts: 55
|
sup guys i want to know where they sell the sportisi koso gauge kit I'm really interested purchasing one. thanks
|
|
September 23rd, 2010, 07:48 PM | #20 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
|
|
September 23rd, 2010, 11:02 PM | #21 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Who are the US dealers? Google isn't cooperating.
|
|
September 24th, 2010, 01:27 AM | #22 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
|
|
September 24th, 2010, 01:29 AM | #23 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
Is not in his website but he can get it for you. He did for me.
|
|
September 24th, 2010, 07:56 AM | #24 |
ninjette.org member
Name: Neil
Location: Whitney Texas
Join Date: Jul 2010 Motorcycle(s): Kawasaki Ninja Posts: 12
|
What about the 07 ninja how do I order gauges for it
|
|
September 24th, 2010, 01:01 PM | #25 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
i think with koso, you no longer use the mechanical speedo line but instead you have to install some little magnet around the rotors for it to pick up the speed/rpm thing. ??
|
|
September 24th, 2010, 06:37 PM | #26 |
ninjette.org member
Name: jashobeam
Location: indiana
Join Date: Aug 2010 Motorcycle(s): 2008 ninja 250 Posts: 36
|
Actually you can still use the mechanical speedo. the magnets i think are an option.
__________________________________________________
Sportisi Jet Kit (#100 Jet),Sportisi VR6 Full Exhaust, SystemSportisi TIS with BRT, Digital Koso gauge,Tank PadVinyl graphics, 150/60/R17, Targa FenderEliminator |
|
September 24th, 2010, 06:55 PM | #27 |
ninjette.org member
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110
|
You can reuse the stock cable one with a adapter. it's easier to remove the stock cable and install the magnetic pickup one. it makes the speedo dead on.
|
|
February 2nd, 2011, 07:07 AM | #28 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
February 2nd, 2011, 09:57 AM | #29 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
the bezel quality could be better for sure. i wasn't satisfied with it.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2011, 10:24 AM | #30 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
Thanks in advance!
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
February 2nd, 2011, 11:09 AM | #31 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Finish is about a 6.5 but with the unit mounted it looks good. The mounting points on the bottom can sometimes be filled with resin. I'm a perfectionist. Since these dash mount are all hand made they are never perfect.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2011, 02:27 PM | #32 |
ninjette.org member
Name: Christopher
Location: Newark
Join Date: Jun 2010 Motorcycle(s): 2008 Ninja 250R Posts: 15
|
Hey Matt. Does the version of the dash you sell only have a cutout for the voltmeter and Koso gauge? Or does it have a cutout for the gear indicator as another option? Thanks.
|
|
February 2nd, 2011, 05:01 PM | #33 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
No it does not have the cut out for the gear indicator. I want to make it clear I DON'T SELL THESE!!!!!!!!!!!! From time to time I am willing to source them. But I do not stock them and have no intention of doing so. If I get them they will cost more then the previously mentioned company. By how much I don't know I would have to look.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2011, 06:19 PM | #34 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
Hi Jason, like Matt said, the finish is not great. Mine looks good because I used some filler and some glazing putty, it had some pinholes and other defects. I then proceed to paint it.
I haven't done the installation yet. I'll be moving back to GA this weekend and was planning on install this to the bike in the next week or two. It definitely looks much better than stock gauge. You can easily repair the imperfection, is not a big deal at all. I have a lot of (8 feet by 4 feet) 3M dinoc black carbon fiber and I'm planning on wrap the bezel for a better look. I know how to work with fiberglass and I been thinking of doing building a few things for the 250 and this bezel is one of them. Let me konw if you have any questions. |
|
February 3rd, 2011, 06:25 AM | #35 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
Thanks JR for the info. I agree with you that the small blemishes could be easily repaired. My only concern is the mounting points are accurate. I can handle a little bondo, sanding and paint but I don't want to have to mess and fiberglass. Not that I can't, I just don't like it. Matt is getting some info for me. I'm still trying to recover from Christmas but the KOSO kit will be in my future.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
February 3rd, 2011, 07:20 AM | #36 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
My Koso is coming...in my dreams...cuz the Shito paul's scam. Kinda like Benard Madoff ponzi scheme.. LOL..
|
|
February 3rd, 2011, 10:46 AM | #37 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Have we confirmed that it is in fact a sham? I have read some of the other posts, and it seems unclear.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
February 3rd, 2011, 10:52 AM | #38 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
http://www.ninjette.org/forums/showthread.php?t=64360
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
February 3rd, 2011, 11:02 AM | #39 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
I;ll go back and read closer later, but I did see a couple things I missed in the last week or so...... *sigh* it is so sad.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
February 21st, 2011, 10:38 PM | #40 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
So I got most of my craps except the face plate like sportisi sells. Anyone knows where I can buy that faceplate?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Koso Gauges - HELP! | snowsoldier | 2008 - 2012 Ninja 250R Tech Talk | 7 | August 26th, 2011 08:27 AM |
koso Gauges | Little Rocket | 1986 - 2007 Ninja 250R Farkles | 6 | October 10th, 2010 11:19 AM |
Installing Koso Gauges | Endorphine | 2008 - 2012 Ninja 250R Tech Talk | 6 | May 31st, 2010 02:00 PM |
Koso Gauges and stuff! | krzysiopl | 2008 - 2012 Ninja 250R Farkles | 0 | March 3rd, 2010 11:23 AM |
Koso gauges | wellcraft | General Motorcycling Discussion | 0 | February 3rd, 2010 07:52 AM |
|
|