![]() |
![]() |
#1 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Fender modification
I really tried to live with the stock rear fender. My plan was to leave this bike as close to stock as feasible. But, putting the bike up on a rear stand was challenging because the darned fender was so long that it interferes with the Pit Bull handle, and it needs to be bent out of the way to lift the bike. Or, it takes 2 people to do it, one to straighten up the bike and the other to carefully put the stand under the spools.
Not liveable. So, I took my handy-dandy hacksaw, removed the license plate, and sliced it cleanly off behind the plate. I managed to keep it pretty clean and level. I was worried it would look terrible, but the functionality was needed for me. Turns out that it looks fine (and now works fine). No need to buy a fender eliminator kit as far as I can tell, and with the new seat cowl that we just added, I'm perfectly happy with how the rear of the bike looks. I love this little ninjette.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#2 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Finally got a pic of the result:
![]()
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#3 |
ninjette.org member
Name: John-Michael
Location: Texas
Join Date: Aug 2008 Motorcycle(s): 2007 EX250 Posts: 133
|
Looks like you only removed the tip of the tail, right? Held a reflector at the bottom? I think the only reason Kawasaki had the fender extended so low was because in some states a rear red reflector is required to be in a certain spot.
Looks good man! Still has a factory look. I don't like complete fender removal. As a matter of fact, I just ordered a factory fender for my 07. I cut the original about 2 days after I got the bike. Did not completely remove it, but I realize how valuable it is in wet weather. |
![]() |
![]() |
![]() |
#4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Yup, I just took the end off (from about halfway in the middle of the license plate). Here's what it used to look like:
![]() With that rear reflector gone, it probably is a little less than legal, but if it's a concern you can pick up red reflective license plate bolts to meet the regulations.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#5 |
Never enough time
Name: Mark
Location: San Mateo, CA
Join Date: Aug 2008 Motorcycle(s): 690sm, ex250, kdx200, nc50, z50 Posts: 73
|
good looking fix, the stock mudguard looked hideous
![]()
__________________________________________________
"It's a lot of fun" |
![]() |
![]() |
![]() |
#6 |
ninjette.org certified postwhore
Name: Sam
Location: Northern Virginia
Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 and ZX-12R 2000 Posts: A lot.
|
Thanks to HKr1 and kkim, here's mine. VA requires a white license plate light, so 4 little leds. If you need more examples, PM me.
|
![]() |
![]() |
![]() |
#7 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Glad we could help
![]() I had showed pics to the wife, asked her what she liked best. She picked completely gone...... So we went to work ![]() L Bracket is up to personal preff for plate location ![]() |
![]() |
![]() |
![]() |
#8 | |
Join Date: Nov 2008 Posts: Too much.
|
Quote:
![]() When I decided to chop mine, I read HKr1's post and copied it to the letter. Credit should go fully to Kerry... and also, when something goes wrong because of it, he's fully to blame, too! ![]() |
|
![]() |
![]() |
![]() |
#9 | |
ninjette.org member
Name: Tom
Location: Fayetteville, NC
Join Date: Oct 2008 Motorcycle(s): 2008 Ninja 250R (Green) Posts: 14
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#10 |
============
Name: Nick
Location: Occoquan, VA
Join Date: Nov 2008 Motorcycle(s): '09 Ninja 250R Posts: 518
|
I have the same as you Alex. It really cleans up the rear of the bike and I think it makes the fender much less noticeable in person.
Here's a pic |
![]() |
![]() |
![]() |
#11 |
ninjette.org certified postwhore
Name: Alex
Location: Belfast, ME
Join Date: Jul 2008 Motorcycle(s): 2010 Honda NT-700-V, formerly, Green 2008 Ninja 250R Posts: A lot.
|
I cut the bottom 4" off the fender and added a square reflector that is not as chinzy as the stock one. I rounded the whole thing off with a file, and it looks quite decent.
|
![]() |
![]() |
![]() |
#12 |
ninjette.org guru
Name: Simen
Location: Norway
Join Date: Jan 2009 Motorcycle(s): 2008 250R (Black) Posts: 298
|
Here is my fender mod.
Before: ![]() The Cut: ![]() After: ![]() Plate-light ![]() Plate-light and rear-light ![]() ![]() I made two 5mm holes in the black rear-light frame, used two Ultrabright white LED's as plate light. ![]() Last futzed with by Guinss; January 6th, 2009 at 06:58 AM. |
![]() |
![]() |
![]() |
#13 |
ninjette.org member
Name: Peter
Location: Copehagen, Denmark
Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40
|
jep, did mine almost the same way, exept i bought a little led plate light, but pretty cool that you fab'ed your own=)
from under. ![]() and another sorry it was a little quick, but you can see nothing hanging down other than the plate. ![]()
__________________________________________________
![]() ![]() |
![]() |
![]() |
![]() |
#14 |
ninjette.org guru
Name: Simen
Location: Norway
Join Date: Jan 2009 Motorcycle(s): 2008 250R (Black) Posts: 298
|
|
![]() |
![]() |
![]() |
#15 |
ninjette.org member
Name: Peter
Location: Copehagen, Denmark
Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40
|
Yep From Denmark=) damn its cold here by the way... why cant we all live in sunny Cali
![]()
__________________________________________________
![]() ![]() |
![]() |
![]() |
![]() |
#16 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#17 |
Join Date: Nov 2008 Posts: Too much.
|
|
![]() |
![]() |
![]() |
#18 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
|
![]() |
![]() |
![]() |
#19 |
Join Date: Nov 2008 Posts: Too much.
|
|
![]() |
![]() |
![]() |
#20 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
alex, your mod looks really clean and still looks stock.
could you please post a close up pic of your fender without the license plate. interested in exactly where you cut yours. thanks. |
![]() |
![]() |
![]() |
#21 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
No problem, next time I take the bike out in the sun I'll try and remember to get a pic.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#22 |
ninjette.org member
Name: Elle
Location: Brampton,Ontario
Join Date: Jan 2009 Motorcycle(s): 2009 Black Ninja 250R Posts: 37
|
Here's my Fender Mod, I wanted to keep the turn indicators but just make it nice and neat, so some work with the Dremel and here you have it!
![]() ![]() |
![]() |
![]() |
![]() |
#23 |
ninjette.org member
Name: Levi
Location: St. George, Utah
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250R, CR125R Posts: 191
|
Looks good, what did you use to mount the license plate and plate light?
|
![]() |
![]() |
![]() |
#24 | |
ninjette.org member
Name: Elle
Location: Brampton,Ontario
Join Date: Jan 2009 Motorcycle(s): 2009 Black Ninja 250R Posts: 37
|
Quote:
And Shhhh there is no plate light right now, just the glow of the tail light. LOL |
|
![]() |
![]() |
![]() |
#25 |
Sarcasm: Yea that'll work
Name: Andy
Location: Essex Jct, VT
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330
|
|
![]() |
![]() |
![]() |
#26 |
<(^^,)>
Name: Vinny
Location: Sydney AU
Join Date: Jan 2009 Motorcycle(s): Ninja 250R (08) Posts: 83
|
I have the TARGA Fender Eliminator but I'm scared to take everything off the back ahaha
![]() |
![]() |
![]() |
![]() |
#27 |
ninjette.org member
Name: Trista
Location: Ontario, Canada
Join Date: Dec 2008 Motorcycle(s): '08 EX650R Green Kawasaki ninja Posts: 120
|
The TARGA fender mod wasn't that hard to do. Yeah you have to take everything off to do it but if you aren't handy with a Dremel than this is the way to do it.
|
![]() |
![]() |
![]() |
#28 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
|
![]() |
![]() |
![]() |
#29 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
It's totally worth the work you have to do. Here's my mod. Looks decent and didn't cost a cent.
|
![]() |
![]() |
![]() |
#30 |
***
Name: Nathan
Location: South Carolina
Join Date: Jan 2009 Motorcycle(s): 2008 ninja 250R Posts: 18
|
Nice job TnNinjaGirl, that about what i want to do also. I'm holding out for CLEAR ALTERNATIVES to finish up with there tail light before i clean it up in the back though.
|
![]() |
![]() |
![]() |
#31 |
ninjette.org guru
Name: Simen
Location: Norway
Join Date: Jan 2009 Motorcycle(s): 2008 250R (Black) Posts: 298
|
|
![]() |
![]() |
![]() |
#32 |
ninjette.org member
Name: Elle
Location: Brampton,Ontario
Join Date: Jan 2009 Motorcycle(s): 2009 Black Ninja 250R Posts: 37
|
|
![]() |
![]() |
![]() |
#33 |
ninjette.org member
Name: Elle
Location: Brampton,Ontario
Join Date: Jan 2009 Motorcycle(s): 2009 Black Ninja 250R Posts: 37
|
|
![]() |
![]() |
![]() |
#34 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
It's nekkid!!
|
![]() |
![]() |
![]() |
#35 |
Sarcasm: Yea that'll work
Name: Andy
Location: Essex Jct, VT
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330
|
|
![]() |
![]() |
![]() |
#36 |
<(^^,)>
Name: Vinny
Location: Sydney AU
Join Date: Jan 2009 Motorcycle(s): Ninja 250R (08) Posts: 83
|
Might have a go this weekend
![]() Its about 115 degrees Fahrenheit right now so I'm avoiding the outdoors ![]() |
![]() |
![]() |
![]() |
#37 |
Join Date: Nov 2008 Posts: Too much.
|
|
![]() |
![]() |
![]() |
#38 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
From the looks of it Kelly you have plenty of room in your garage for me. What gives bro?
|
![]() |
![]() |
![]() |
#39 |
ninjette.org member
Name: Levi
Location: St. George, Utah
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250R, CR125R Posts: 191
|
Is the TARGA fender elim. a kit? I have never heard of it....
|
![]() |
![]() |
![]() |
#40 |
***
Name: Nathan
Location: South Carolina
Join Date: Jan 2009 Motorcycle(s): 2008 ninja 250R Posts: 18
|
|
![]() |
![]() |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pregen fairing modification | JasonJ | 1986 - 2007 Ninja 250R Tech Talk | 8 | August 26th, 2014 07:51 AM |
Ninja 250R Modification | patzcool | Pictures | 12 | March 17th, 2013 09:20 PM |
30 minute modification | little fish | 1986 - 2007 Ninja 250R Tech Talk | 13 | February 19th, 2012 03:18 PM |
new airbox modification | slow_2k10 | 2008 - 2012 Ninja 250R Tech Talk | 6 | February 19th, 2012 11:16 AM |
Latest Modification | kawigirl09 | Pictures | 8 | October 10th, 2009 08:30 AM |
|
|