July 5th, 2012, 04:37 PM | #1 |
ninjette.org newbie
Name: Charlie
Location: Some where in Canada
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250r, and a custom built fat tire chopper Posts: 2
|
L.E.D Dioded mod, Plug and play!!
I just installed four L.E.D turn signals on my bike, so I wanted to share some pictures of the no cut harness I made.
|
|
July 6th, 2012, 05:09 PM | #2 |
1/4 English, 3/4 Kick Ass
Name: Jeremy
Location: Dayton, OH
Join Date: Sep 2011 Motorcycle(s): 2002 Triumph Speed Triple 955i, '05 Suzuki SV650S(retired), '11 Ninja 250R(sold) Posts: A lot.
|
What parts did you use? What did you do? Pics only go so far.
|
|
July 7th, 2012, 07:11 PM | #3 |
ninjette.org newbie
Name: Charlie
Location: Some where in Canada
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250r, and a custom built fat tire chopper Posts: 2
|
It's pretty straight forward, the parts I used are shown in image 1. I ordered some factory type plugs from Japan and I used two diodes. It took me about 3 minutes to hook up the harness I made.
If you have seen the no cut diode mod from modmy250 dot com, and I believe the how too is posted on this forum also, you would have noticed that you have to remove a wire from the main harness and plug it into another part of a harness. With the harness I made I didn't have to remove any wires, it was just plug and play!! |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Plug and Play 4.5 rear Rim? | joes280 | 2008 - 2012 Ninja 250R Farkles | 345 | August 1st, 2014 01:21 AM |
[motorcyclistonline] - Plug and Play, or Pray? | Answers | Ninjette Newsbot | Motorcycling News | 0 | May 27th, 2014 07:30 PM |
I need a louder plug and play horn.. Help, pls! | poo poo | 2008 - 2012 Ninja 250R Tech Talk | 11 | September 8th, 2011 05:59 AM |
Koso rx-2 plug and play kit F/S | dyeforever | Motorcycle-related | 2 | May 14th, 2011 02:31 PM |
[motorcycledaily.com] - Plug-and-Play | Ninjette Newsbot | Motorcycling News | 0 | August 7th, 2009 01:20 AM |
|
|