Bent footpegs, replace?

ASecretNinja · October 2nd, 2009, 10:05 PM

I need to replace some bent footpegs. Can I just slap the passenger pegs on the front and call it a day? I haven't had time to see if the connectors are the same.

Verus Cidere · October 2nd, 2009, 10:59 PM

I think there are things on the main footpegs that are missing on the rear ones. Pretty sure you have to order new ones, or some aftermarket ones that look a little sexier. You may not want those, but it's an option.

ASecretNinja · October 3rd, 2009, 10:13 AM

That's not a bad idea. Anyone offer any testimonials on different aftermarket pegs? Much appreciated!

Edit: Comp Werkes, while sexy, are beyond how much im looking to spend. I'm currently looking at EMGOs. Thoughts?

New edit: Does Comp Werkes even make pegs for pre-gens? And I just read a review saying that EMGOs don't offer a lot of grip. I may just get a fooking OEM at this point.

Verus Cidere · October 3rd, 2009, 11:42 AM

I checked on the comp werkes site and it shows that they make footpegs for the 88-03 pregens, which basically means yes. If they fit those years, they fit all of the pregens. They're $55 from the site though. Check on ebay. You can probably find something that fits, looks fairly good, grips fairly well, and is quite a bit cheaper.

ASecretNinja · October 3rd, 2009, 11:27 PM

Was it $55 a pair? Cause I thought it was 55/per. That seemed pretty steep. Anyways I went with some Emgos, cause they're half the price. Hopefully they'll work out. Thanks for the help!

Verus Cidere · October 4th, 2009, 09:16 PM

No problem!

Grn99Kawi · October 5th, 2009, 02:24 PM

Why not just OEM replacements from something like ebay? The stockers are pretty decent.. and they have rubber on them to isolate much of the vibration.

Verus Cidere · October 5th, 2009, 08:07 PM

Looks are the issue in this thread I think.

October 2nd, 2009, 10:05 PM	#1
ASecretNinja ATGATT Squid Killer Name: Chad Location: So. Cal Join Date: May 2009 Motorcycle(s): '06 CBR600 Posts: 189	Bent footpegs, replace? I need to replace some bent footpegs. Can I just slap the passenger pegs on the front and call it a day? I haven't had time to see if the connectors are the same.

October 2nd, 2009, 10:59 PM	#2
Verus Cidere ninjette.org certified postwhore Name: Michael Location: Southern NM Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.	I think there are things on the main footpegs that are missing on the rear ones. Pretty sure you have to order new ones, or some aftermarket ones that look a little sexier. You may not want those, but it's an option. __________________________________________________ 1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail.

October 3rd, 2009, 11:42 AM	#4
Verus Cidere ninjette.org certified postwhore Name: Michael Location: Southern NM Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.	I checked on the comp werkes site and it shows that they make footpegs for the 88-03 pregens, which basically means yes. If they fit those years, they fit all of the pregens. They're $55 from the site though. Check on ebay. You can probably find something that fits, looks fairly good, grips fairly well, and is quite a bit cheaper. __________________________________________________ 1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail.

October 4th, 2009, 09:16 PM	#6
Verus Cidere ninjette.org certified postwhore Name: Michael Location: Southern NM Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.	No problem! __________________________________________________ 1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail.

October 5th, 2009, 02:24 PM	#7
Grn99Kawi ninjette.org sage Name: A Location: Long Island, NY Join Date: Apr 2009 Motorcycle(s): 2000 Honda CBR600F4 (sold) 1999 Ninja 250 (sold) Posts: 586	Why not just OEM replacements from something like ebay? The stockers are pretty decent.. and they have rubber on them to isolate much of the vibration. __________________________________________________ 2000 Honda CBR600F4 Silver and Red 1999 Kawi Racing Green Ninja 250 sold

October 3rd, 2009, 10:13 AM	#3
ASecretNinja ATGATT Squid Killer Name: Chad Location: So. Cal Join Date: May 2009 Motorcycle(s): '06 CBR600 Posts: 189	That's not a bad idea. Anyone offer any testimonials on different aftermarket pegs? Much appreciated! Edit: Comp Werkes, while sexy, are beyond how much im looking to spend. I'm currently looking at EMGOs. Thoughts? New edit: Does Comp Werkes even make pegs for pre-gens? And I just read a review saying that EMGOs don't offer a lot of grip. I may just get a fooking OEM at this point.

October 3rd, 2009, 11:27 PM	#5
ASecretNinja ATGATT Squid Killer Name: Chad Location: So. Cal Join Date: May 2009 Motorcycle(s): '06 CBR600 Posts: 189	Was it $55 a pair? Cause I thought it was 55/per. That seemed pretty steep. Anyways I went with some Emgos, cause they're half the price. Hopefully they'll work out. Thanks for the help!

October 5th, 2009, 08:07 PM	#8
Verus Cidere ninjette.org certified postwhore Name: Michael Location: Southern NM Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.	Looks are the issue in this thread I think. __________________________________________________ 1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lowside- bent clutch thrust rod and possibly bent shift fork?	Klondike1020	General Motorcycling Discussion	3	April 1st, 2014 02:29 AM
footpegs..	Josh_kcco	1986 - 2007 Ninja 250R Tech Talk	5	February 10th, 2014 02:00 PM
Adjustable footpegs	Sipper'	1986 - 2007 Ninja 250R Tech Talk	3	September 3rd, 2013 06:42 PM
Bent Clutch Pedal - replace, bend it back, or leave it alone?	jaesun	1986 - 2007 Ninja 250R Tech Talk	8	September 1st, 2012 03:22 PM
[roadracingworld.com] - Thursday Video: It's Not Replace And Ride--It's Replace, Adju	Ninjette Newsbot	Motorcycling News	0	October 1st, 2009 01:10 PM