SlingShot Racing Carbon Fiber Parts on my Tricked out Ninja 300 - Page 2

diwhiteii · February 20th, 2013, 12:50 AM

Quote:

Originally Posted by msebastian

But there are alot of tasteless mods on the bike.

I hope not as tasteless as your forum photo.

diwhiteii · February 20th, 2013, 12:55 AM

Quote:

Originally Posted by abhijitz

Hey David , remember me?

Refresh my memory?

diwhiteii · February 20th, 2013, 01:00 AM

Quote:

Originally Posted by Aggrotech

where did you find these at? It wasnt http://eshop.ktautopart.com/dual-ang...projector.html
by chance was it?

Nope,

Here you go.

http://www.ebay.com/itm/2-5-Motorcyc...item2576ccb972

diwhiteii · February 20th, 2013, 01:08 AM

Quote:

Originally Posted by choneofakind

This looks sick David

I really want a setup like that. My projector and halo isn't nearly as visible as that because of my stupid pregen fluted lens.

Thanks! Was going to post more pictures of it all back together, but as soon as it was all complete I turned it on again to take a picture and one of the stupid halo rings went out I was sooooooooooooooooo mad. I had to take everthing back off and reopen the headlight housing and still have to wait for the new one to come in the mail, so frustrated. All blue halo rings where on backorder too, so I went with ultraviolet for the bigger halo rings, should be here friday. I should have it complete by Saterday and will repost the new pics.

msebastian · February 20th, 2013, 04:41 AM

Quote:

Originally Posted by diwhiteii

I hope not as tasteless as your forum photo.

No not that tasteless.

Somchai · February 20th, 2013, 05:36 AM

Here comes the future (I know it's expensive...)

In the moment they sell it for cars and trucks only, but mc should also be possible.

For the difference in lighting look in the pdf page 4.

Kevin2109 · February 20th, 2013, 05:44 AM

Quote:

Originally Posted by Jiggles

I can't wait for your for sale thread

+1

Lets hope its not crashed first

jk, amazing looking bike

felo · February 21st, 2013, 08:06 AM

you havent found any frame sliders that u liked?

diwhiteii · February 23rd, 2013, 02:15 PM

Quote:

Originally Posted by felo

you havent found any frame sliders that u liked?

Shogun is the brand I have on my 250R but I am not really liking their new setup. I dont like the pieces that you have to cut and remove.

diwhiteii · February 23rd, 2013, 02:19 PM

My bike is striped and parts are being painted. Will update when pieces are back.

RAIZO · February 24th, 2013, 09:31 AM

Nice bike, thanks for the posts and especially sharing product/install info.

diwhiteii · February 24th, 2013, 11:10 AM

Quote:

Originally Posted by RAIZO

Nice bike, thanks for the posts and especially sharing product/install info.

Thanks. I will be adding something new next week. Stay tuned.

JeffM · March 2nd, 2013, 09:58 AM

Nice modded up 300. Very nice work.

I know modding is entertaining and somewhat the heart and soul of having fun with an inexpensive bike. Also, it makes the bike your own in a sea of look-alike bikes.

I get it.

However, my practical side says, for $11K, this:

diwhiteii · March 2nd, 2013, 11:08 AM

Quote:

Originally Posted by JeffM

Nice modded up 300. Very nice work.

I know modding is entertaining and somewhat the heart and soul of having fun with an inexpensive bike. Also, it makes the bike your own in a sea of look-alike bikes.

I get it.

However, my practical side says, for $11K, this:

Your so right that is what I should of got, but then it would look like everyone else's, can't have that

choneofakind · March 2nd, 2013, 02:18 PM

No no no, you've got it all wrong.

Get the $11,000 ZX6R, THEN get all fancy schmancy with it

JeffM · March 2nd, 2013, 02:42 PM

Quote:

Originally Posted by choneofakind

No no no, you've got it all wrong.

Get the $11,000 ZX6R, THEN get all fancy schmancy with it

MNDruggist · March 2nd, 2013, 05:45 PM

Can you give me the link to the kickstand? I'm thinking on upgrading to an aftermarket rather than doing the loop grind/repaint for aftermarket rearsets. Thanks.

alex.s · March 2nd, 2013, 05:46 PM

carbon fiber parts... mo' money mo' women yo.

choneofakind · March 3rd, 2013, 06:33 PM

Quote:

Originally Posted by diwhiteii

I should have it complete by Saterday and will repost the new pics.

New pics??

I like updates from you

diwhiteii · March 4th, 2013, 10:29 AM

Quote:

Originally Posted by MNDruggist

Can you give me the link to the kickstand? I'm thinking on upgrading to an aftermarket rather than doing the loop grind/repaint for aftermarket rearsets. Thanks.

I don't have a link for the kickstand because they haven't started to produce them.

diwhiteii · March 4th, 2013, 10:32 AM

Quote:

Originally Posted by choneofakind

New pics??

I like updates from you

This week I should have some new pics. Just got my headlights back together and am waiting for my parts back from the body shop.

diwhiteii · March 4th, 2013, 09:21 PM

Quote:

Originally Posted by choneofakind

New pics??

I like updates from you

Here are some pics I just took; headlights back on and new seat with the super comfortable saddleman gel.

S1att3r · March 4th, 2013, 09:36 PM

So are you going to do a full write up on your HIDs?

diwhiteii · March 4th, 2013, 09:43 PM

Quote:

Originally Posted by S1att3r

So are you going to do a full write up on your HIDs?

Probably not because this was the most pain in the butt mod. Removing my swingarm and bearings out of my wheels for powder coating was less of a headache and those are big jobs.

diwhiteii · March 10th, 2013, 09:04 PM

Quote:

Originally Posted by choneofakind

New pics??

I like updates from you

New Pics on page one

RAIZO · March 11th, 2013, 03:59 PM

NICE! still getting that high mount exhaust or did you decide against that? how much if any did you lower your bike?

diwhiteii · March 11th, 2013, 04:39 PM

Thanks!Yep still getting the exhaust, just waiting for it. I only raised the front 7mm to accommodate for my clip-ons. Didn't lower the bike.

Surferboy120 · March 15th, 2013, 10:50 PM

Quote:

Originally Posted by diwhiteii

Here are some pics I just took; headlights back on and new seat with the super comfortable saddleman gel.

Whats the part # for the seat I like that.

diwhiteii · March 19th, 2013, 08:31 PM

Quote:

Originally Posted by Surferboy120

Whats the part # for the seat I like that.

No Part number, from http://www.customseatcreations.com/

Xplorguy · March 19th, 2013, 09:59 PM

David, does CustomCreations leave enough material or extended sidewall in case you wanted to add more material for seat comfort? There work looks really good!

alex.s · March 19th, 2013, 10:38 PM

how come the exhaust hanger isnt carbon fiber? aluminum seems a little chinsy

diwhiteii · March 26th, 2013, 12:42 AM

Quote:

Originally Posted by Xplorguy

David, does CustomCreations leave enough material or extended sidewall in case you wanted to add more material for seat comfort? There work looks really good!

There was room to add more material but I went with saddleman gel

diwhiteii · March 26th, 2013, 12:52 AM

Quote:

Originally Posted by alex.s

how come the exhaust hanger isnt carbon fiber? aluminum seems a little chinsy

Just temp. until I get my new exhaust

Xplorguy · March 26th, 2013, 02:08 PM

Quote:

Originally Posted by diwhiteii

There was room to add more material but I went with saddleman gel

David, so if I ordered their standard cover I could add more foam, say one half to 1" compressed and still have enough material to staple properly? And did you order a gel insert from Saddleman? If so, how is that working out?

diwhiteii · March 26th, 2013, 06:04 PM

Quote:

Originally Posted by Xplorguy

David, so if I ordered their standard cover I could add more foam, say one half to 1" compressed and still have enough material to staple properly

Yes, I believe so.

And did you order a gel insert from Saddleman?

Yes

If so, how is that working out?

Amazing!

diwhiteii · April 5th, 2013, 10:39 AM

Just got my new dark smoke windscreen from Puig.

diwhiteii · April 5th, 2013, 12:41 PM

New Tech Spec C3 center tank pad

diwhiteii · April 5th, 2013, 12:52 PM

Custom Chrome Blue Rim Tape

choneofakind · April 5th, 2013, 01:00 PM

Wow. I can't believe you're not done yet. So many parts. Geez.

felo · April 5th, 2013, 01:04 PM

may i ask why lever is blue and the other chrome?
also, is the speedo easy to take out?

February 23rd, 2013, 02:19 PM	#50
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	New Custom Paint Job My bike is striped and parts are being painted. Will update when pieces are back.

March 2nd, 2013, 09:58 AM	#53
JeffM Mr. 988 Name: Jeff Location: Sandy, Utah Join Date: Aug 2009 Motorcycle(s): One Posts: A lot. Blog Entries: 1	Nice modded up 300. Very nice work. I know modding is entertaining and somewhat the heart and soul of having fun with an inexpensive bike. Also, it makes the bike your own in a sea of look-alike bikes. I get it. However, my practical side says, for $11K, this: __________________________________________________ "I'm the one that's got to die when it's time for me to die, so let me live my life, the way I want to" - Jimi Hendrix Cancer

March 2nd, 2013, 05:45 PM	#57
MNDruggist ninjette.org member Name: Mark Location: Central MN Join Date: Aug 2012 Motorcycle(s): 2013 Ninja 300 Ebony Posts: 39	Can you give me the link to the kickstand? I'm thinking on upgrading to an aftermarket rather than doing the loop grind/repaint for aftermarket rearsets. Thanks. __________________________________________________ Unregistered's village called.......Their idiot is missing.

March 2nd, 2013, 05:46 PM	#58
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	carbon fiber parts... mo' money mo' women yo. __________________________________________________

March 4th, 2013, 09:36 PM	#63
S1att3r ninjette.org member Name: Raygan Location: North East Texas Join Date: Oct 2012 Motorcycle(s): White 2013 Ninja 300(Storm), Silver 2003 Fjr1300 Posts: 173	So are you going to do a full write up on your HIDs? __________________________________________________ ATGATT For all I know, women who ride motorcycles are all man-hating dominatrix's. It was like a mild panic attack!

February 21st, 2013, 08:06 AM	#48
felo ninjette.org member Name: Carlos Location: Puerto Rico Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181	you havent found any frame sliders that u liked?

February 24th, 2013, 09:31 AM	#51
RAIZO ninjette.org newbie Name: RAIZO Location: Florida Join Date: Feb 2013 Motorcycle(s): Ninja 300 Posts: 2	Nice bike, thanks for the posts and especially sharing product/install info.

March 2nd, 2013, 02:18 PM	#55
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	No no no, you've got it all wrong. Get the $11,000 ZX6R, THEN get all fancy schmancy with it

March 11th, 2013, 03:59 PM	#66
RAIZO ninjette.org newbie Name: RAIZO Location: Florida Join Date: Feb 2013 Motorcycle(s): Ninja 300 Posts: 2	NICE! still getting that high mount exhaust or did you decide against that? how much if any did you lower your bike?

March 11th, 2013, 04:39 PM	#67
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Thanks!Yep still getting the exhaust, just waiting for it. I only raised the front 7mm to accommodate for my clip-ons. Didn't lower the bike.

March 19th, 2013, 09:59 PM	#70
Xplorguy ninjette.org member Name: Norman Location: Eugene, Oregon Join Date: Apr 2011 Motorcycle(s): BMW K12RS, DL650 , New 2013 "WonderBike" Ninja300SE Posts: 52	David, does CustomCreations leave enough material or extended sidewall in case you wanted to add more material for seat comfort? There work looks really good!

March 19th, 2013, 10:38 PM	#71
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	how come the exhaust hanger isnt carbon fiber? aluminum seems a little chinsy __________________________________________________
	1 out of 1 members found this post helpful.

April 5th, 2013, 01:00 PM	#79
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Wow. I can't believe you're not done yet. So many parts. Geez.

April 5th, 2013, 01:04 PM	#80
felo ninjette.org member Name: Carlos Location: Puerto Rico Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181	may i ask why lever is blue and the other chrome? also, is the speedo easy to take out?
	1 out of 1 members found this post helpful.