June 16th, 2012, 04:37 PM | #1 |
ninjette.org member
Name: Shawn
Location: Winnemucca
Join Date: Mar 2012 Motorcycle(s): 07' ZX14 10' 250 96' CBR 600 Posts: 12
|
Idle jumps to 9000 rpm on choke then wont stay idle after off
2010 ninja 250. Full tyga exhaust and K@N pod filter with carbs rejetted and shimmed. When u choke the bike it goes to like 9000 rpm when it was normall around 4000 rpm i think. Then the bike wont idle and dies when u shut off the choke. The bike will keep dying. The only way to get it to go is open the choke very little till your rolling then shut it off.
|
|
June 19th, 2012, 06:45 AM | #2 |
ninjette.org member
Name: Henry
Location: Westchester
Join Date: Jun 2012 Motorcycle(s): '12 250R Posts: 43
|
Theres a knob under the fairings on the left side by the kickstand. Twist it and see if that helps. It controls the rpm when the bike is idle. You can increase and decrease the rpm by twisting it left/right
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dying at idle with choke off | jonnybravo9 | 2008 - 2012 Ninja 250R Tech Talk | 6 | October 2nd, 2014 09:17 PM |
09 Ninja 250r wont stay idle without choke | TqAmsNy | 2008 - 2012 Ninja 250R Tech Talk | 11 | March 20th, 2013 01:38 PM |
Choke has no effect on idle... Help. | Jono | 1986 - 2007 Ninja 250R Tech Talk | 15 | September 14th, 2011 09:45 PM |
bike wont idle right :( | 86ninjarider | 1986 - 2007 Ninja 250R Tech Talk | 11 | August 3rd, 2011 09:09 AM |
bike wont idle | james250ninja | 1986 - 2007 Ninja 250R Tech Talk | 7 | April 1st, 2010 12:05 PM |
Thread Tools | |
|
|