ninjette.org

Go Back   ninjette.org > 2013 - 2017 Ninja 300 > 2013 - 2017 Ninja 300 Tech Talk

Notices

Reply
 
Thread Tools
Old February 1st, 2018, 08:59 AM   #1
randycastell
ninjette.org member
 
randycastell's Avatar
 
Name: randy
Location: S.F. Bay Area
Join Date: Nov 2017

Motorcycle(s): '74 Honda CB450K, '87 Ducati Paso750, '17 Kawasaki EX300

Posts: 35
Mivv: Slip-on exhaust for EX300

Geetings all. Thank you for the forum. Please allow me to add another thread on aftermarket exhausts. I've purchased a Mivv "Storm" slip-on exhaust from Italy. Link to website below:

https://www.mivv.com/en/products/k-0...ja-300-2013-2/

The website has a dyno chart showing the performance of this product, a technical sheet and a schematic diagram. This slip-on meets Euro 3 standards for Db level, CO2 and CARB standards as well.

Amazon or Ebay price for Stainless Steel version about $250. Comes with midpipe, support strap and all hardware needed to install.

It's Italian made in Rimini and it is IMHO beautiful in design detail and craftsmanship. Gorgeous.

The heaviest aftermarket slip on muff I've ever handled, but still significantly lighter than stock muff.

I'm impressed. Thanks for allowing me an opportunity to share my experience. I have the morning off and I'm heading to the shop for install. I'll post a follow photo and my first impressions.
Attached Images
File Type: jpg Screen Shot 2018-02-01 at 7.50.31 AM.jpg (75.0 KB, 6 views)
File Type: jpg Screen Shot 2018-02-01 at 7.50.57 AM.jpg (71.8 KB, 14 views)
randycastell is offline   Reply With Quote




Old February 1st, 2018, 10:23 AM   #2
taz
????????????????
 
taz's Avatar
 
Name: T
Location: no where
Join Date: Feb 2016

Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR

Posts: A lot.
MOTM - May '17
HATE TO BREAK IT TO YOU BUT THATS A BAD DYNO SHEET TORQ AND HP HAVE TO CROSS AT 5250. LIKE THIS ONE
A HARLEY


AND THIS
A CBR600RR
taz is offline   Reply With Quote


Old February 1st, 2018, 10:35 AM   #3
taz
????????????????
 
taz's Avatar
 
Name: T
Location: no where
Join Date: Feb 2016

Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR

Posts: A lot.
MOTM - May '17
NINJA 300 WITH AREA P EXHAUST

taz is offline   Reply With Quote


Old February 1st, 2018, 11:41 AM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Quote:
Originally Posted by taz View Post
HATE TO BREAK IT TO YOU BUT THATS A BAD DYNO SHEET TORQ AND HP HAVE TO CROSS AT 5250. LIKE THIS ONE
A HARLEY

AND THIS
A CBR600RR
Yep, that's because dyno actually only measures torque and HP is calculated using HP=TQ*RPM/5250. However, while crossover is always at 5250rpms, if the scale of HP and TQ are different, this can shift the graphs to a different crossover (optical illusion). However, in the original graph, they are on the same scale, so yeah, something's wrong.
DannoXYZ is offline   Reply With Quote


Old February 2nd, 2018, 04:28 AM   #5
randycastell
ninjette.org member
 
randycastell's Avatar
 
Name: randy
Location: S.F. Bay Area
Join Date: Nov 2017

Motorcycle(s): '74 Honda CB450K, '87 Ducati Paso750, '17 Kawasaki EX300

Posts: 35
Greetings all. Thank you for your posts...

I rode a limited amount around town yesterday with the purty new muff. With the end baffle installed (by manufacturer w/rivet) it is as quiet as the O.E.M. item. Early next week I'll remove the rivet and baffle to determine how loud it it will be without.The Mivv muff installed easily with the nice hardware included (although the stainless steel bracket clamp has a mill finish which may scratch easily as you install) and it will allow for easier maintenance and cleaning in and around the swing arm and rear master cylinder. Of course, my boot heel no longer comes in contact with a muffler or shield. Overall more "in scale" with the EX300 and IMHO a nice looking replacement for the questionable O.E.M. item.
Attached Images
File Type: jpg IMG_2478.jpg (109.4 KB, 7 views)
File Type: jpg IMG_2476.jpg (128.4 KB, 5 views)
File Type: jpg IMG_2480.jpg (131.2 KB, 5 views)
randycastell is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
[motorcyclistonline] - Long-Term KTM RC390: Mivv Ghibli Exhaust System Installation Ninjette Newsbot Motorcycling News 0 May 13th, 2016 02:00 PM
Mivv GP Slip-on Bols 2008 - 2012 Ninja 250R Tech Talk 4 May 22nd, 2011 11:22 AM
[topix.net] - Mivv: Double Gun titanium exhaust Ninjette Newsbot Motorcycling News 0 April 12th, 2011 02:30 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 01:25 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.