|
April 23rd, 2011, 10:58 AM
|
#1 |
|
ladyrocket
Name: Megan
Location: Cali
Join Date: Dec 2010 Motorcycle(s): 09 Ninja 250R Posts: 84
Blog Entries: 1
|
Gasket?
Getting ready to tear my bike apart to re-jet the carbs. I havent seen anything about replacing gaskets on the carbs. Does anyone know if there are gaskets on the carbs??? Thanks guys!
__________________________________________________
Never ride faster than your angel can fly |
|
|
|
April 23rd, 2011, 11:42 AM
|
#2 |
|
Join Date: Nov 2008 Posts: Too much.
|
you should be okay with whatever is in there now, if your bike is a newgen.
|
|
|
|
|
April 26th, 2011, 06:35 AM
|
#4 |
|
ninjette.org certified postwhore
Name: Frugal
Location: Dallas/Fort Worth (DFW)
Join Date: Mar 2010 Motorcycle(s): Several Posts: A lot.
|
To clarify, the carbs are for the most part assembled with reusable O-rings which rarely go bad and even then it's typically due to extreme age and poor quality work by previous mechanics/owners. The one thing to be very careful about are the diaphragms for the slides, they're under the two covers on top of the carbs held in place with 4 screws each. Do not tear these, be very careful how you pull them loose from the carb body. Also, do not allow any cleaner to come in contact the rubber; I've seen more than one ruined by this.
|
|
|
|
|
April 26th, 2011, 04:01 PM
|
#5 |
|
ladyrocket
Name: Megan
Location: Cali
Join Date: Dec 2010 Motorcycle(s): 09 Ninja 250R Posts: 84
Blog Entries: 1
|
Finished up everything this weekend and the bike is running GREAT! thank you for your help
__________________________________________________
Never ride faster than your angel can fly |
|
|
|
|
April 26th, 2011, 04:15 PM
|
#6 |
|
Join Date: Nov 2008 Posts: Too much.
|
what exactly did you do?
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blown gasket? | Christofini | 2008 - 2012 Ninja 250R Tech Talk | 6 | November 8th, 2013 10:48 AM |
| oversize gasket... | micoulisninja | 2008 - 2012 Ninja 250R Tech Talk | 7 | November 3rd, 2012 09:46 AM |
| head gasket? | NorthKoast | 2008 - 2012 Ninja 250R Tech Talk | 14 | March 10th, 2012 04:01 PM |
| Re-use old head gasket ? | Tony B | 1986 - 2007 Ninja 250R Tech Talk | 10 | June 1st, 2011 06:27 AM |
| exhaust gasket? | 00v_Lucky | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 25th, 2010 03:17 PM |
|
|
