April 16th, 2009, 11:03 PM | #1 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Pregen seat cowl +
Hey guys.
I was thinking about my fairing predicament the other day and remembered seeing this site before. I am considering getting a couple replacement fairings from here because they're inexpensive (compared to brand new ones) and I can play with them a little to make them unique! I figured a couple 'o pregen owners might be interested in a seat cowl for our humble bikes. This, I've heard, is the only company that makes them for our model. My personal opinion is that you should get a CSC seat cover because they look much better than this, but a couple of the seat covers make it possible to have both and not cover up too much of importance! Just thought I'd throw this out there! Here's the link to the Airtech page: http://www.airtech-streamlining.com/...2501988-06.htm Again, out of experience I recommend getting a CSC seat cover first, as they look much better than this!
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
|
April 16th, 2009, 11:23 PM | #2 |
ninjette.org certified postwhore
Name: Steve
Location: Kekaha, Kauai HI
Join Date: Jan 2009 Motorcycle(s): 05 GSX-R 600 2003 EX250: Woodcraft Bars, Levers, Mirrors, Shim'd Mixture, Synthetic, '08 Rear Shock Posts: A lot.
|
have checked these out on a number of occasions, and they're pretty much it as far as pre-gen fairings go...
was considering the seat cowl (single piece), as my 250 carries only 1. it's on the bottom of the mod-list though, and at just about 100 bills for that cowling piece unfinished...i thought was abit on the high-side, but would still pay as it's the only thing out there. aloha
__________________________________________________
Remember when sex was safe and motorcycles were dangerous? |
|
April 17th, 2009, 06:46 AM | #3 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Thanks for the site info.
|
|
April 17th, 2009, 03:29 PM | #4 |
Back on the Black!
Name: Alan
Location: Gastonia, North Carolina
Join Date: Jan 2009 Motorcycle(s): 2006 Kawasaki Ninja EX250 (Black) Posts: 831
|
Thanks! This could come in really handy...
Did you notice that they kept referring to the Ninja as : your little 250 ... Last futzed with by Strider; April 18th, 2009 at 03:44 PM. |
|
April 20th, 2009, 05:11 PM | #5 |
Back on the Black!
Name: Alan
Location: Gastonia, North Carolina
Join Date: Jan 2009 Motorcycle(s): 2006 Kawasaki Ninja EX250 (Black) Posts: 831
|
Does anyone have, or know anyone who has, the Solo seat cowl installed on their Pre-Gen?
I would like to see it on the bike before I decide to go that route or not ... |
|
April 20th, 2009, 05:20 PM | #6 |
Join Date: Nov 2008 Posts: Too much.
|
I dunno... did you read where it's attached w/ velcro?
|
|
April 20th, 2009, 09:32 PM | #8 |
Newb..... on a steeek! :D
Name: Mike
Location: Windermere, FL
Join Date: Feb 2009 Motorcycle(s): 2012 Harley Davidson XL883L Sportster Superlow Posts: A lot.
|
Here's an example what one looks like with it on.
|
|
April 20th, 2009, 10:28 PM | #9 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
That's gotta be one of the ugliest ninjettes I've ever seen! Good seat cowl example though.
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
|
April 21st, 2009, 05:18 PM | #10 |
Back on the Black!
Name: Alan
Location: Gastonia, North Carolina
Join Date: Jan 2009 Motorcycle(s): 2006 Kawasaki Ninja EX250 (Black) Posts: 831
|
|
|
April 22nd, 2009, 09:06 PM | #11 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
The one in the pic is the full cowl. That one isn't connected by velcro, replaces the side and rear cowls, and adds the seat cowl. If you were planning to ride this on the street, you'd need to cut tail light holes. But no velcro is involved in this one. Oh, and for the one that is attached by velcro, you'd have to remove your grab bar too. (Not too big a sacrifice, as nobody will need it if there aren't any passengers.)
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
|
September 4th, 2011, 01:35 PM | #12 |
ninjette.org newbie
Name: Jake
Location: Mobile, Al
Join Date: Sep 2011 Motorcycle(s): 07 Ninja 250 Posts: 1
|
I realize this is an incredibly old thread but i was wondering if anyone had an example picture of the velcro attached cowl on a ninjette?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do you get pregen seat off without a key? | jcgss77 | 1986 - 2007 Ninja 250R Tech Talk | 9 | May 17th, 2017 12:56 PM |
EX500 seat on a pregen? | archaeofreak | General Motorcycling Discussion | 7 | October 31st, 2014 09:19 PM |
PreGen Corbin seat | lolibater | Motorcycle-related | 6 | January 28th, 2014 07:41 AM |
want pregen seat dimiensions | alex.s | 1986 - 2007 Ninja 250R Tech Talk | 4 | August 21st, 2011 08:31 PM |
PreGen Corbin Seat | Trillian | Items Wanted | 2 | August 21st, 2011 02:25 PM |
|
|