Powder Coating Service... Wheels & Other parts..

Tims250R · May 12th, 2009, 04:08 PM

Anyone Looking to get their wheels or other Bike parts Powder coated let me know..

I am a new member, But I own & operate Hp-powdercoatings..

Im Offering 10% off Prices Listed for "Ninjette.org" Members..

Regular Prices:

Sportbikes

All prices include the following.

Stripping/sandblasting parts, cleaning/outgas parts
prep & Powder coat

All parts must have any bearings/seals removed

Prices shown are for single solid color's..
For Candies, Metallics & Extra Clear coat Ad 25% to prices listed...
I will also offer Discount on Multiple parts & or Complete bike Package price..

$225 Frame

$50 Swing-arm

$45 Subframe

$35 Swing-arm Bracket

$120 Wheels- set

$25 Front Brake rotor,each-center's only

$25 Rear Brake rotor,each-center's only

$40 Fork Tubes,pair upper

$45 Fork's lower legs Pair

$60 complete rider set with heelguards, rear set's, brake, and shift levers

$25 Wheel hub/sprocket carrier

$25 Tripple Clamp upper

$20 Tripple lower

$15 Brake caliper bracket,each

$20 Brake caliper (1pc). each

$30 Brake caliper (2) pc, each

$25 Clutch cover

$25 Stator cover

$15 Rear sprocket

Ceramic Exhaust price's...All colors..

$110 Header
$40 Muffler

Sportbike Frame & swing-arm

$250 for single color.
$300 for 2 part metallic or candies

Wheels per set

$120 set in single color
$150 set in metallic or candies
$200 Two tone colors

You can reply to this post or PM me with any Questions

Thanks, TIM
HP-POWDERCOATINGS.COM

We Also do Ceramic coating..

kkim · May 12th, 2009, 04:10 PM

cool...

thanks, Tim.

ManyCavies · May 12th, 2009, 04:14 PM

please excuse me I'm slow

So I send you both rims (without tires) and you paint both for $120 in bubblegum pink and ship back to me free?

ManyCavies · May 12th, 2009, 04:15 PM

oops I now saw plus shipping

kkim · May 12th, 2009, 04:17 PM

plus for wheels, you need to remove the bearings and everything else attached to the wheels.

Verus Cidere · May 12th, 2009, 10:05 PM

I just looked through your colors and I REALLY LIKE your "bentley blue". It looks very nice. I'm considering getting some new sprockets, so I might send you one of them to powdercoat before I install it. You wouldn't happen to have a ball park estimate on how much would you charge for that? I might also send you the pipe system to my exhaust before I install that as well. Again, I have to wait until after I get it. Great service though! Thanks for offering it!

Edit -- I also thought I might send you my rearset, and my rear pegs/brackets. Anybody know if those can survive 400 degrees F? (along with all the other things I listed...)

Tims250R · May 13th, 2009, 05:20 AM

Quote:

Originally Posted by Verus Cidere

I just looked through your colors and I REALLY LIKE your "bentley blue". It looks very nice. I'm considering getting some new sprockets, so I might send you one of them to powdercoat before I install it. You wouldn't happen to have a ball park estimate on how much would you charge for that? I might also send you the pipe system to my exhaust before I install that as well. Again, I have to wait until after I get it. Great service though! Thanks for offering it!

Edit -- I also thought I might send you my rearset, and my rear pegs/brackets. Anybody know if those can survive 400 degrees F? (along with all the other things I listed...)

$18.75 Sprocket in Bentley Blue..

$40 Muffler

$30-$50 Rear set Pegs/Brackets Depending on color..
They Hold up Fine to the Heat.. I do atleast 3-4 sets a week..

Thanks , TIM

Ohh Snap · June 3rd, 2009, 02:57 PM

im in LA....

i want my wheels PC green =)

Tims250R · June 3rd, 2009, 03:29 PM

Quote:

Originally Posted by Ohh Snap

im in LA....

i want my wheels PC green =)

Just Ship them to me...

ztrack157 · June 3rd, 2009, 06:32 PM

I have a '77 XL100 I'm redoing how much for the rear shock springs and the shock lowers if possible.

Tims250R · June 3rd, 2009, 07:24 PM

Quote:

Originally Posted by ztrack157

I have a '77 XL100 I'm redoing how much for the rear shock springs and the shock lowers if possible.

Around $20 for the Pair Plus shipping..

Thanks , TIM

ztrack157 · June 3rd, 2009, 07:25 PM

sweet thanks tim I will be hitting you up shortly.

tc3jg · June 7th, 2009, 01:28 AM

how would we remove the bearings whats the turnaround time?

Tims250R · June 7th, 2009, 05:21 AM

Quote:

Originally Posted by tc3jg

how would we remove the bearings whats the turnaround time?

I can remove the Bearings & Seals if Needed its Not that Big a Deal...

Turnaround is Usually around 3-4 days Depending on Current Workload..

Im in the process of getting an Extra Set or Two of 08-09 wheels Together
to Start a Powder Coating Wheel Exchange Program..

I will post more info on that when i get everything Finalized..

Thanks , TIM

tc3jg · June 7th, 2009, 11:21 AM

ok please let me know as I am very interested

dmonaco05 · June 7th, 2009, 03:27 PM

do you have any pics of an 09 sunbeam red with matching wheels? i saw ur blue bike pics but its a lot of blue to take in i'd just want the wheels.

Banzai · June 7th, 2009, 05:13 PM

Quote:

Originally Posted by Tims250R

I can remove the Bearings & Seals if Needed its Not that Big a Deal...

Turnaround is Usually around 3-4 days Depending on Current Workload..

Im in the process of getting an Extra Set or Two of 08-09 wheels Together
to Start a Powder Coating Wheel Exchange Program..

I will post more info on that when i get everything Finalized..

Thanks , TIM

Now THAT is music to my ears! I'm in! I will await word that your wheel exchange program is up and running!

Are bearings/seals reuseable in these things? That is, do they come out easily enough that they're usually not destroyed in teh process? Otherwise, front and rear, it's about $100 for new bearings and seals.

kkim · June 7th, 2009, 05:23 PM

From what I understand, new bearings/seals need to be installed.

Would be great if Tim says otherwise.

Tims250R · June 7th, 2009, 08:52 PM

Quote:

Originally Posted by kkim

From what I understand, new bearings/seals need to be installed.

Would be great if Tim says otherwise.

Its always a Good idea to Replace the Bearings while Wheels are apart..

But with that being Said... I have done alot of Used/Newer & Brand New Bike Wheel Sets and Removed & reused The Bearings & Seals without any Issues..
And thats on about 200+ Sets of Wheels..

tc3jg · June 7th, 2009, 10:09 PM

tim are you going to do a swap type deal with other parts as well?

Tims250R · June 8th, 2009, 06:40 AM

Quote:

Originally Posted by tc3jg

tim are you going to do a swap type deal with other parts as well?

Yes if there is enough interest in other Parts.... What parts were you thinking of ?

Thanks , TIM

tc3jg · June 8th, 2009, 10:16 AM

Brake rotors for sure and possibly the brake calipers as well.

Banzai · June 8th, 2009, 11:18 AM

Quote:

Originally Posted by tc3jg

Brake rotors for sure and possibly the brake calipers as well.

I would NEVER accept any swap on rotors, too easy to get someone elses trash (gouged, excessive wear for mileage, warped). Calipers are crap shoot, too. Too easy to get ones that have issues.

want1sobad · June 8th, 2009, 11:19 AM

Quote:

Originally Posted by dmonaco05

do you have any pics of an 09 sunbeam red with matching wheels? i saw ur blue bike pics but its a lot of blue to take in i'd just want the wheels.

here you go dom!

tc3jg · June 8th, 2009, 03:57 PM

Quote:

Originally Posted by Banzai

I would NEVER accept any swap on rotors, too easy to get someone elses trash (gouged, excessive wear for mileage, warped). Calipers are crap shoot, too. Too easy to get ones that have issues.

OOO never thought about that good point ok then.

darthnip · June 16th, 2009, 02:26 PM

i was wondering if anyone around here did any powdercoating. i have a small setup in my garage, but nothing like what you got tim. i mainly do parts for bmx bikes and other small stuff. i can do 20" bmx rims but thats about as big as i can do. i just do it for fun mainly, a hobby kinda. everything i've done so far has turned out great. sooner or later i need to build a big oven so i can do frames as well. if i ever want to get my 250 rims done, i'll send them your way.

M-Oorb · June 16th, 2009, 05:57 PM

I know with headers powder coating places usually like them to be new to powdercoat them...im guessing your the same way tim?

Tims250R · June 17th, 2009, 06:22 AM

Quote:

Originally Posted by M-Oorb

I know with headers powder coating places usually like them to be new to powdercoat them...im guessing your the same way tim?

Well i do alot of Ceramic coating on Used automotive & motorcycle headers..
I just can't warranty Used parts as long as New one's..

b_eastep · June 17th, 2009, 01:23 PM

Quote:

Originally Posted by darthnip

i was wondering if anyone around here did any powdercoating. i have a small setup in my garage, but nothing like what you got tim. i mainly do parts for bmx bikes and other small stuff. i can do 20" bmx rims but thats about as big as i can do. i just do it for fun mainly, a hobby kinda. everything i've done so far has turned out great. sooner or later i need to build a big oven so i can do frames as well. if i ever want to get my 250 rims done, i'll send them your way.

i do my own.

darthnip · June 17th, 2009, 01:50 PM

i love doing it, i find it more forgiving than paint. i actually got started because i couldn't find a certain part in a certain color for a bmx bike i was restoring. its a cool hobby and you can make some extra money doing it for friends, not to mention saving money doing your own stuff. if anyone has done any parts on their bikes it would be cool to throw up some pics.

May 12th, 2009, 04:08 PM	#1
Tims250R Hppowdercoating Name: Tim Location: St. Charles, MO Join Date: May 2009 Motorcycle(s): 09-250R Posts: 170	Powder Coating Service... Wheels & Other parts.. Anyone Looking to get their wheels or other Bike parts Powder coated let me know.. I am a new member, But I own & operate Hp-powdercoatings.. Im Offering 10% off Prices Listed for "Ninjette.org" Members.. Regular Prices: Sportbikes All prices include the following. Stripping/sandblasting parts, cleaning/outgas parts prep & Powder coat All parts must have any bearings/seals removed Prices shown are for single solid color's.. For Candies, Metallics & Extra Clear coat Ad 25% to prices listed... I will also offer Discount on Multiple parts & or Complete bike Package price.. $225 Frame $50 Swing-arm $45 Subframe $35 Swing-arm Bracket $120 Wheels- set $25 Front Brake rotor,each-center's only $25 Rear Brake rotor,each-center's only $40 Fork Tubes,pair upper $45 Fork's lower legs Pair $60 complete rider set with heelguards, rear set's, brake, and shift levers $25 Wheel hub/sprocket carrier $25 Tripple Clamp upper $20 Tripple lower $15 Brake caliper bracket,each $20 Brake caliper (1pc). each $30 Brake caliper (2) pc, each $25 Clutch cover $25 Stator cover $15 Rear sprocket Ceramic Exhaust price's...All colors.. $110 Header $40 Muffler Sportbike Frame & swing-arm $250 for single color. $300 for 2 part metallic or candies Wheels per set $120 set in single color $150 set in metallic or candies $200 Two tone colors You can reply to this post or PM me with any Questions Thanks, TIM HP-POWDERCOATINGS.COM We Also do Ceramic coating.. __________________________________________________ HP-POWDERCOATINGS.COM http://i52.photobucket.com/albums/g2...100_3312-1.jpg Last futzed with by Tims250R; May 13th, 2009 at 05:11 AM. Reason: Added Info

May 12th, 2009, 04:14 PM	#3
ManyCavies ninjette.org sage Name: Crissy Location: Indio, CA Join Date: Jan 2009 Motorcycle(s): . . . . . . . 2000 Suzuki Intruder VS800 "Suzi", 2008 Kawasaki Ninja EX250 "Yoshi" Posts: 507	please excuse me I'm slow So I send you both rims (without tires) and you paint both for $120 in bubblegum pink and ship back to me free? __________________________________________________ GO GREEN!! GOT MY PINK ON!!

May 12th, 2009, 04:15 PM	#4
ManyCavies ninjette.org sage Name: Crissy Location: Indio, CA Join Date: Jan 2009 Motorcycle(s): . . . . . . . 2000 Suzuki Intruder VS800 "Suzi", 2008 Kawasaki Ninja EX250 "Yoshi" Posts: 507	oops I now saw plus shipping __________________________________________________ GO GREEN!! GOT MY PINK ON!!

May 12th, 2009, 10:05 PM	#6
Verus Cidere ninjette.org certified postwhore Name: Michael Location: Southern NM Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.	I just looked through your colors and I REALLY LIKE your "bentley blue". It looks very nice. I'm considering getting some new sprockets, so I might send you one of them to powdercoat before I install it. You wouldn't happen to have a ball park estimate on how much would you charge for that? I might also send you the pipe system to my exhaust before I install that as well. Again, I have to wait until after I get it. Great service though! Thanks for offering it! Edit -- I also thought I might send you my rearset, and my rear pegs/brackets. Anybody know if those can survive 400 degrees F? (along with all the other things I listed...) __________________________________________________ 1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail.

June 3rd, 2009, 06:32 PM	#10
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I have a '77 XL100 I'm redoing how much for the rear shock springs and the shock lowers if possible. __________________________________________________ Sportisimoto USA is born.

May 12th, 2009, 04:10 PM	#2
kkim Join Date: Nov 2008 Posts: Too much.	cool... thanks, Tim.

May 12th, 2009, 04:17 PM	#5
kkim Join Date: Nov 2008 Posts: Too much.	plus for wheels, you need to remove the bearings and everything else attached to the wheels.

June 3rd, 2009, 02:57 PM	#8
Ohh Snap 420 President Name: John Location: SoCal 818 Join Date: Jun 2009 Motorcycle(s): 09 Ninja grass color Posts: 96	im in LA.... i want my wheels PC green =)

June 3rd, 2009, 07:25 PM	#12
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	sweet thanks tim I will be hitting you up shortly. __________________________________________________ Sportisimoto USA is born.

June 7th, 2009, 01:28 AM	#13
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	how would we remove the bearings whats the turnaround time?

June 7th, 2009, 11:21 AM	#15
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	ok please let me know as I am very interested

June 7th, 2009, 03:27 PM	#16
dmonaco05 ninjette.org member Name: Dom Location: oswego ny Join Date: Apr 2009 Motorcycle(s): 2009 ninja 250r Posts: 46	do you have any pics of an 09 sunbeam red with matching wheels? i saw ur blue bike pics but its a lot of blue to take in i'd just want the wheels.

June 7th, 2009, 05:23 PM	#18
kkim Join Date: Nov 2008 Posts: Too much.	From what I understand, new bearings/seals need to be installed. Would be great if Tim says otherwise.

June 7th, 2009, 10:09 PM	#20
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	tim are you going to do a swap type deal with other parts as well?

June 8th, 2009, 10:16 AM	#22
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	Brake rotors for sure and possibly the brake calipers as well.

June 16th, 2009, 02:26 PM	#26
darthnip ninjette.org member Name: darth Location: central indiana Join Date: Jun 2009 Motorcycle(s): 2007 ninja 250 Posts: 84	i was wondering if anyone around here did any powdercoating. i have a small setup in my garage, but nothing like what you got tim. i mainly do parts for bmx bikes and other small stuff. i can do 20" bmx rims but thats about as big as i can do. i just do it for fun mainly, a hobby kinda. everything i've done so far has turned out great. sooner or later i need to build a big oven so i can do frames as well. if i ever want to get my 250 rims done, i'll send them your way.

June 16th, 2009, 05:57 PM	#27
M-Oorb ninjette.org sage Name: Matt Location: South East Florida/Rutgers University Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914	I know with headers powder coating places usually like them to be new to powdercoat them...im guessing your the same way tim?

June 17th, 2009, 01:50 PM	#30
darthnip ninjette.org member Name: darth Location: central indiana Join Date: Jun 2009 Motorcycle(s): 2007 ninja 250 Posts: 84	i love doing it, i find it more forgiving than paint. i actually got started because i couldn't find a certain part in a certain color for a bmx bike i was restoring. its a cool hobby and you can make some extra money doing it for friends, not to mention saving money doing your own stuff. if anyone has done any parts on their bikes it would be cool to throw up some pics.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Powder Coating Services.	massacremasses	Motorcycle-related	91	October 8th, 2014 08:38 AM
Powder Coating	SES2009	Motorcycle-related	2	February 2nd, 2013 10:45 AM
powder coating	alex.s	Off-Topic	19	October 8th, 2011 02:52 PM
Powder coating coming soon!	CThunder-blue	2008 - 2012 Ninja 250R Farkles	36	August 22nd, 2011 09:26 AM
Some pics of My Powder coating work..	Tims250R	Pictures	12	May 26th, 2009 03:43 PM