August 16th, 2016, 12:36 PM | #1 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
FS: two pre-gen 250 motors in MA 02780
I purchased ( another ) motorcycle for the frame & parts. The deal came with 2 engines - one is in two peices ( head removed , and a tiny hole in one piston ), and the other is installed in the bike, valve cover off - it cranks, but doesn't start. I have not removed it yet, and might leave it installed so that you can assess it in person, before buying.
I do not need either of these, as I have a working motor ready to install. You can have both engines - as is, for $150 total. Local pick near Taunton, MA.
__________________________________________________
... can't stop updating the bike! |
|
August 17th, 2016, 06:41 AM | #2 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Pics of the 2 part motor...
__________________________________________________
... can't stop updating the bike! |
|
August 17th, 2016, 03:05 PM | #3 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
you're not living up to your username
__________________________________________________
|
1 out of 1 members found this post helpful. |
August 18th, 2016, 06:44 PM | #4 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
GLWS
__________________________________________________
|
|
September 1st, 2016, 06:08 AM | #5 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Any racers out there? This would make a nice winter project I also have 2 pre-gen frames for sale to go with these... ( No, not the 98 crashed bike that I am parting out. That went straight to the dumpster. )
__________________________________________________
... can't stop updating the bike! |
|
November 7th, 2016, 08:48 AM | #6 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
$100 for both motors. Any takers?
__________________________________________________
... can't stop updating the bike! |
|
November 7th, 2016, 11:58 AM | #7 |
ninjette.org member
Name: Cody
Location: Wilmington, NC
Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249
|
If you have to head down to nc, I would take you up on that deal.
|
|
November 23rd, 2016, 07:37 AM | #8 |
ninjette.org member
Name: Dan
Location: NJ
Join Date: Dec 2012 Motorcycle(s): 2011 z1000, 2005 K1200s, 2010 ex250r Posts: 27
|
do you have any pregen tanks for sale? Looking for a green tank for my 07...
|
|
November 23rd, 2016, 08:48 AM | #9 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Sorry,no. No tanks.
__________________________________________________
... can't stop updating the bike! |
|
December 22nd, 2016, 09:11 PM | #10 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Sorry, a bit off topic, but I am looking for a straight front fork for my ninja that would be in good condition and I can pick up. Please, let me know if you have one you could sell.
Thanks. |
|
December 28th, 2016, 07:55 AM | #11 | |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Quote:
I'll check. Which fork - brake or speedometer side?
__________________________________________________
... can't stop updating the bike! |
|
|
January 1st, 2017, 08:36 PM | #12 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
I am hoping to replace entire fork assembly with the crown etc: mine is twisted somewhere and I'd like to do it once and forget about it - don't have time nor space to be figuring out where the issue is.
Thanks. |
|
January 2nd, 2017, 05:53 PM | #13 | |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Quote:
I went thru my parts today, and sorry, but I don't have any extra forks or tripples.
__________________________________________________
... can't stop updating the bike! |
|
|
July 1st, 2017, 08:36 PM | #14 |
ninjette.org member
Name: Bill
Location: New England
Join Date: Jun 2017 Motorcycle(s): 2007 Kawasaki Ninja 250R Posts: 30
|
Still for sale? $100 for two engines?
|
|
July 11th, 2017, 07:33 AM | #15 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Yes, still for sale.
__________________________________________________
... can't stop updating the bike! |
|
May 28th, 2018, 03:16 PM | #16 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Any takers? I still have them.
__________________________________________________
... can't stop updating the bike! |
|
May 28th, 2018, 05:29 PM | #17 |
ninjette.org member
Name: Cody
Location: Wilmington, NC
Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249
|
Man I would if you were closer.
|
|
July 25th, 2018, 11:01 AM | #18 |
ninjette.org certified postwhore
Name: Tom
Location: Northern Virginia
Join Date: Jul 2015 Motorcycle(s): 2001 Ninja 250, 2019 Harley Ultra Classic, 2001 Suzuki SV650 Posts: A lot.
MOTM - Jan '16
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pre gen 250 stock at the track | rubber side down | Ninjettes At Speed | 7 | September 26th, 2014 03:26 PM |
FS Ninja 250 Pre-Gen part out | AFazakerley | Motorcycle-related | 13 | October 23rd, 2013 01:28 AM |
Pre gen 250 fairings orange txt me | Klondike1020 | Free stuff! | 14 | August 6th, 2013 10:17 PM |
Pre-gen (2007 and older) and "new pre-gen" (2008-2012) frames | kjohng | General Motorcycling Discussion | 5 | February 27th, 2013 10:03 AM |
Is the Pre-gen 250 still a capable bike? | s2kenny | Ninjettes At Speed | 94 | December 13th, 2011 01:39 PM |
|
|