February 19th, 2011, 10:53 PM | #1 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Koso gauge & gear Indicator install
Just got done installing the long waited Koso gauge & gear indic. Gear indicator was bought here in US. Koso gauge was from Shito Paul...I was one of the lucky ones to get something...he still owe me a custom face plate and somehow I have a feeling I'll never get it. Have not test or setup yet. Will do tomorrow
|
|
February 19th, 2011, 11:18 PM | #2 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
I'm reading the instruction to set this thing up. Is our bike 4 strokes and 2 pistons?
|
|
February 20th, 2011, 12:26 AM | #3 |
ninjette.org member
Name: Xtian
Location: Artesia, California
Join Date: Jun 2010 Motorcycle(s): 2010 Ninja 250r SE Posts: 98
|
That looks bad a$$. Hope you get it all set up. Ive been wanting one. Pricey, but I have a feeling it's all worth it
|
|
February 20th, 2011, 10:12 AM | #4 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
okay I set up the Koso gauge and everything is working except the gear indicator. I guess is it because I use a diff brand of gear indicator or is it because I set up wrong? Hmm..
Our engine is 4 stroke cycles/2 pistons correct? I also use the Daytona water temp sensor instead of the provided Koso water temp sensor...and it only displays 80F temp...not sure if it's the weather or the sensor are incompatible..I need to swap them out to find out I guess. oil temp displays around 120F or so at that time. Fuel gauge works...kind of fluctuate all over the place.. I need to adjust the resistance...what value of resistance did you guys use? |
|
February 20th, 2011, 10:32 PM | #5 |
ninjette.org sage
Name: Andy
Location: Sheboygan, WI
Join Date: Dec 2008 Motorcycle(s): 1988 Honda Hawk NT650, 1989 Honda Hawk NT650, 1997 GSXR750 Track Bike Posts: 890
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: koso gauge install | dyeforever | 2008 - 2012 Ninja 250R Tech Talk | 207 | March 30th, 2017 03:50 PM |
Koso gauge install question | randomwalk101 | 2008 - 2012 Ninja 250R Tech Talk | 6 | February 17th, 2012 01:54 PM |
Koso gauge and gear indicator confusion | randomwalk101 | 2008 - 2012 Ninja 250R Tech Talk | 49 | July 29th, 2011 08:35 AM |
DIY for Koso gear indicator? Not listed in the directory. | MotoStrider | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 22nd, 2011 05:06 AM |
For the next person to install a Koso gauge cluster... | headshrink | 2008 - 2012 Ninja 250R Tech Talk | 8 | October 26th, 2010 06:25 AM |
|
|