September 16th, 2019, 10:20 AM | #1 |
ninjette.org member
Name: Ray
Location: Miami
Join Date: Aug 2019 Motorcycle(s): Kawasaki Ninja 250R 2006 Posts: 20
|
Ninja EX250 2006 Cleaning Cam Chain Tensioner Help???
So, I disassembled the Cam Chain Tensioner to clean, and it looks like the small thin spring needs replacing. . .But, when putting the parts back together, I noticed on the Kawasaki parts list that I was missing a part???
It's a small collar, Part 92027-1240. But, I'm not sure where it fits??? I thought that there was just the metal PUSHROD, Small Spring, Large Spring and the (ball bearing retainer) Does anyone know where this smaller collar fits onto? If you look at the pdf that I included it shows it as No. 92027. Any help would be appreciated. . . |
|
September 16th, 2019, 12:12 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Conical sleeve fits into body of tensioner. It's the part that 'locks' position of plunger as it adjusts. Orientation of sleeve is important as it allows one-way movement.
|
|
September 16th, 2019, 12:19 PM | #3 |
ninjette.org member
Name: Ray
Location: Miami
Join Date: Aug 2019 Motorcycle(s): Kawasaki Ninja 250R 2006 Posts: 20
|
eesh, . . Okay, so I just put this back together WITHOUT this sleeve!!
Where does this sleeve (collar) fit in, and whats the orientation ?? I'm still not sure where it fits. . .. sorry for being an idiot. |
|
September 17th, 2019, 05:22 AM | #4 |
ninjette.org member
Name: Ray
Location: Miami
Join Date: Aug 2019 Motorcycle(s): Kawasaki Ninja 250R 2006 Posts: 20
|
So, how does the Cam-Tensioner fo back together?
'Conical Sleeve' or (collar) slide down the Pushrod ontop of the BIG spring-- then the Ballbearing retainer?? Thanks, Ray- |
|
September 17th, 2019, 10:47 AM | #5 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
|
|
September 17th, 2019, 10:47 AM | #6 |
ninjette.org member
Name: Ray
Location: Miami
Join Date: Aug 2019 Motorcycle(s): Kawasaki Ninja 250R 2006 Posts: 20
|
Okidoke! will do! Thanks so much!!!
Ray- |
|
September 17th, 2019, 10:50 AM | #7 |
ninjette.org member
Name: Ray
Location: Miami
Join Date: Aug 2019 Motorcycle(s): Kawasaki Ninja 250R 2006 Posts: 20
|
Does it matter if the Dark Gray rim of the 'Conical Sleeve' is on the bottom or Top??
|
|
September 18th, 2019, 03:02 AM | #8 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Yes, test assembling it without springs and try pushing back & forth on plunger. You'll find that it moves in one direction only. And that direction is dictated by sleeve. Orient it so plunger only moves towards engine.
|
|
September 20th, 2019, 05:40 AM | #9 |
ninjette.org member
Name: Ray
Location: Miami
Join Date: Aug 2019 Motorcycle(s): Kawasaki Ninja 250R 2006 Posts: 20
|
I gotcha, . . !
Thanks again for all the hel |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cam chain tensioner | ninjajoey | 1986 - 2007 Ninja 250R Tech Talk | 19 | April 11th, 2017 03:55 PM |
Old Cam Chain Tensioner | akima | 2008 - 2012 Ninja 250R Tech Talk | 0 | February 1st, 2017 06:41 AM |
Manual cam chain tensioner. | Monkeytofu | 1986 - 2007 Ninja 250R Tech Talk | 10 | December 23rd, 2013 05:58 PM |
cam chain tensioner | kittyslasher | 2008 - 2012 Ninja 250R Tech Talk | 2 | June 16th, 2013 09:17 AM |
|
|