February 29th, 2012, 07:26 PM | #1 |
ninjette.org newbie
Name: sean
Location: louisiana
Join Date: Feb 2012 Motorcycle(s): 04 250 Posts: 2
|
$20 solution to fan switch problem
I am posting a $20 ($19.90 w/shipping) solution to our $60 thermal fan switch problems. I bought the part (241-999001) in the hopes that it would work...and it does! I have tested it for a week now with no problems. The part is a perfect fit. Just sharing this because the info I have gotten from this site has been invaluable, thanks.
|
|
February 29th, 2012, 07:52 PM | #2 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
...wut?
|
|
February 29th, 2012, 08:50 PM | #3 |
ninjette.org newbie
Name: sean
Location: louisiana
Join Date: Feb 2012 Motorcycle(s): 04 250 Posts: 2
|
This part will replace 27010-1304, which can cost up to $60.
|
|
February 29th, 2012, 09:11 PM | #4 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Is this a pre-gen only problem? Because I've never heard of it...
|
|
February 29th, 2012, 09:58 PM | #5 |
Milkshake Drinker
Name: Skippii
Location: Richmond, Va
Join Date: Aug 2011 Motorcycle(s): 2007 Orange DRZ400-S, 2005 Ninja 250 & Custom Thundercunt Dirt Chopper Posts: A lot.
|
I've never heard of it either. I know the temp threshold on pregens for the fan to switch of can range anywhere from the gauge's halfway point to almost into the red, but I've never heard of there being a problem with the switch.
__________________________________________________
"What a sweetheart."- ninja_sleeper to me |
|
March 1st, 2012, 08:12 AM | #6 |
Smoker
Name: Bob
Location: SoCal
Join Date: Dec 2010 Motorcycle(s): Guess.... Posts: 556
|
Very few people have "actual" problems with these IME. But even if the part was bad, You can get one from a wrecked bike for $20 shipped or less.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for a solution to an unfortunate problem | Bastakks | 2008 - 2012 Ninja 250R Tech Talk | 6 | May 3rd, 2013 09:32 AM |
Solution to the motorcycle wave problem | mrlmd | General Motorcycling Discussion | 5 | April 29th, 2010 02:27 PM |
|
|