June 29th, 2013, 08:21 PM | #1 |
ninjette.org member
Name: aaron
Location: east texas
Join Date: Jul 2012 Motorcycle(s): 2013 honda shadow phantom Posts: 170
|
starter idle gear
i replaced my alternator cover to day and when i was re-installing it i noticed the starter idle gear could move in and out. is this supposed to be pushed in so that the teeth of it connect with the teeth of starter motor clutch gear? ive put the cover back on but havent put n the fluids and try to crank it. thx
|
|
June 29th, 2013, 08:32 PM | #2 |
ninjette.org sage
Name: Brad
Location: Sydney
Join Date: Mar 2012 Motorcycle(s): Ninja 250r 2010 SE Posts: 573
|
The engine cover will stop the sprocket from falling out of where it is supposed to be.
I'm not sure if it is possible to put the cover back on without the starter gear lining up with the grooves in the big sprocket(on crank) and the starter motor spindle gear thing. |
|
June 29th, 2013, 08:33 PM | #3 |
ninjette.org sage
Name: Brad
Location: Sydney
Join Date: Mar 2012 Motorcycle(s): Ninja 250r 2010 SE Posts: 573
|
Last time I installed mine, the gear almost fell out when I was puttting the cover on. I did have it all lined up though so everything was good.
|
|
June 30th, 2013, 04:57 AM | #4 |
ninjette.org member
Name: aaron
Location: east texas
Join Date: Jul 2012 Motorcycle(s): 2013 honda shadow phantom Posts: 170
|
here's a picture to explain better. when i took of the cover Blue was sticking out like it is in the pic. b4 i put cover back on i pushed back Blue so that its gears where in contact with Red's.
|
1 out of 1 members found this post helpful. |
June 30th, 2013, 04:58 AM | #5 |
ninjette.org member
Name: aaron
Location: east texas
Join Date: Jul 2012 Motorcycle(s): 2013 honda shadow phantom Posts: 170
|
if any could clarify that this is the correct orientation i'd much appreciate it. im hours away from putting in fluids and re-cranking and am gettin very paranoid.
|
|
June 30th, 2013, 06:59 AM | #6 | |
ninjette.org sage
Name: Brad
Location: Sydney
Join Date: Mar 2012 Motorcycle(s): Ninja 250r 2010 SE Posts: 573
|
Quote:
I'm pretty sure the engine cover keeps it from falling out of the grooves. |
|
|
June 30th, 2013, 07:42 AM | #7 |
ninjette.org member
Name: aaron
Location: east texas
Join Date: Jul 2012 Motorcycle(s): 2013 honda shadow phantom Posts: 170
|
ok i thought so. when i pulled alt cover off it moved forward to where it wasnt contacting the big gear behind the fly wheel. i pushed it back cuz it kinda seemed like it was suppossed to be in contact with it. was pretty sure thats how it went and made sense to me, but wanted a 2nd opinion.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Starter Relay/Starter Problem | Time Mage | 1986 - 2007 Ninja 250R Tech Talk | 13 | July 13th, 2012 05:02 AM |
Hello starter oneway gear question | jibberish71 | 1986 - 2007 Ninja 250R Tech Talk | 8 | May 7th, 2011 02:32 PM |
|
|