February 28th, 2014, 07:21 PM | #1 |
ninjette.org member
Name: oswaldo
Location: Clarksville,Tn
Join Date: Jun 2013 Motorcycle(s): 2010 Kawasaki Ninja 250R (Passion Red, Ca Model) Posts: 107
|
Need help with 88-94 CDI wiring
So I ordered a wiring harness of ebay that was listed as it came off a 89 ninja 250. I also got a 92 CDI box p/n 1229, from my understanding they're both compatible. I just receive the parts but the wires going to the connectors seem to be going to the wrong pins. Furthermore my harness doesn't even have red cable. Is it possible I was sent the wrong harness? I'm confused and I've searched and looked at the diagrams and it seems wrong. Can anyone confirm this or give me some insight as to what's wrong? I'mn ot that savvy when it comes to electronics and cables. But I need to figure it out before I start slicing into my bike to try mod it to the old CDI..
__________________________________________________
I would be rich by now if I had a dollar for every person that has told me "You need to upgrade, You need a bigger bike, You need more power..." |
|
March 1st, 2014, 01:09 PM | #2 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Pinging @g21-30
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
March 1st, 2014, 01:18 PM | #3 |
ninjette.org sage
Name: Byron
Location: Reno, NV
Join Date: Dec 2011 Motorcycle(s): Ninja ex250 1990 Posts: 761
|
Hmm i hope these help
__________________________________________________
1990 250F. ex300 motor swap, 15/42 gearing, flush side markers, newgen intergrated front fairing, rear integrated turn signals, DB Touring Bubble, zx600 rear shock, Custom DanMoto Exhaust Last futzed with by EMSRacer07; March 1st, 2014 at 06:00 PM. |
|
March 1st, 2014, 05:54 PM | #4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
March 1st, 2014, 07:13 PM | #5 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
You have the correct ICU but the wrong wiring . This is the original one I made.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
March 1st, 2014, 09:19 PM | #6 |
ninjette.org member
Name: oswaldo
Location: Clarksville,Tn
Join Date: Jun 2013 Motorcycle(s): 2010 Kawasaki Ninja 250R (Passion Red, Ca Model) Posts: 107
|
That's what I figured, I guess I'll try a wiring harness for the same year as the box.. Thanks
__________________________________________________
I would be rich by now if I had a dollar for every person that has told me "You need to upgrade, You need a bigger bike, You need more power..." |
|
March 2nd, 2014, 01:16 PM | #7 |
ninjette.org member
Name: Luca
Location: Westchester ny
Join Date: Nov 2012 Motorcycle(s): Ninja 250 Posts: 26
|
http://www.ninjette.org/forums/attac...1&d=1251408231 only 7 wires will be used, since the '88-94 CDI only has 7 connections, i used sprade connectors putting each wire onto each pin individually to make my own harness, was just a matter of connecting 6 matching pairs of colored wires.The one remaining wire pair is (solid Red ['88] and Brown with black stripe ['08+]and i was done.following this racerX link above..
|
|
March 3rd, 2014, 12:44 PM | #8 |
ninjette.org member
Name: oswaldo
Location: Clarksville,Tn
Join Date: Jun 2013 Motorcycle(s): 2010 Kawasaki Ninja 250R (Passion Red, Ca Model) Posts: 107
|
I fixed it, I just de pinned and rearranged the wires in the connector.
__________________________________________________
I would be rich by now if I had a dollar for every person that has told me "You need to upgrade, You need a bigger bike, You need more power..." |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
88-94 cdi swap in 08-12 new gen wiring help | Lucagst | 2008 - 2012 Ninja 250R Tech Talk | 4 | February 24th, 2014 06:02 PM |
CDI wiring help | V2Neal | 1986 - 2007 Ninja 250R Tech Talk | 9 | January 26th, 2014 01:14 PM |
CDI Pinout/Schematic/Wiring | indr | 2008 - 2012 Ninja 250R Tech Talk | 2 | January 28th, 2013 09:56 AM |
wiring harness and pregen cdi | thomason2wheels | 2008 - 2012 Ninja 250R Tech Talk | 10 | November 13th, 2012 08:50 AM |
CDI wiring question | PeeFo | 1986 - 2007 Ninja 250R Tech Talk | 8 | January 10th, 2012 10:45 PM |
|
|