November 10th, 2009, 08:41 PM | #1 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Gauging interest in another Exhaust GB
Anyone interested? $260 shipped both the new VR and VR6.
__________________________________________________
Sportisimoto USA is born. |
|
November 18th, 2009, 11:20 AM | #2 |
ninjette.org member
Name: Duvi
Location: Oklahoma City
Join Date: May 2009 Motorcycle(s): 09 Ninja 250R Special Ed Posts: 99
|
I will be interested how long will it be till you have the carbon VR6?
|
|
November 18th, 2009, 12:12 PM | #3 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
The VR will be in carbon form I am waiting on a sample of it the VR6 due to its construction is not eligible for a Carbon wrap. The Carbon VR will be available probably in January alon with the new VRX undertail exhaust.
__________________________________________________
Sportisimoto USA is born. |
|
November 18th, 2009, 12:15 PM | #4 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
Is this price good for the undertail as well???
__________________________________________________
Using Pedal Power |
|
November 18th, 2009, 01:05 PM | #5 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
No but the goal is to still have it be cheaper than the basic Area P full system.
__________________________________________________
Sportisimoto USA is born. Last futzed with by ztrack157; November 18th, 2009 at 02:08 PM. |
|
November 18th, 2009, 02:09 PM | #6 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
whoa whoa whoa...your coming out with an undertail Matt? Very interested...cant wait till its released
__________________________________________________
Pictures of my ninjette plus... |
|
November 18th, 2009, 03:21 PM | #7 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Yes we are coming out with an undertail exhaust. Other than FAB who isn't even producing them Sportisi is the only other company to take a gander at doing an undertail. We are just hoping for a decent power gain with it due to the bending in the tubes. Hoping to be within spitting distance of the VR's high 29's power wise which is going to be tough. I'm hoping the next prototype is done early next week
__________________________________________________
Sportisimoto USA is born. |
|
November 18th, 2009, 08:16 PM | #8 |
ninjette.org member
Name: Duvi
Location: Oklahoma City
Join Date: May 2009 Motorcycle(s): 09 Ninja 250R Special Ed Posts: 99
|
hmm thn i might have to wait and take a look at the undertail one before I buy!!!
|
|
November 18th, 2009, 08:39 PM | #9 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Duvi this is why I do not throw up pictures yet, its still in the R/D phase. Should have numbers within the next week. I was trying to state that it is harder to make power due to the complexity of the desgn.
__________________________________________________
Sportisimoto USA is born. |
|
November 19th, 2009, 06:24 AM | #10 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
Just ribbing you Matt...if you could make one for $260 I'd buy 5.....cost of 5 VR6's is probably a little closer to the actual cost of the VRX anyways. Keep up the good work gonna be nice when it is all said and done. Let me know if you need any help with it...although I really doubt you need it
__________________________________________________
Using Pedal Power |
|
November 19th, 2009, 09:19 AM | #11 |
ninjette.org member
Name: Duvi
Location: Oklahoma City
Join Date: May 2009 Motorcycle(s): 09 Ninja 250R Special Ed Posts: 99
|
I'll keep my eyes open for the updates!
|
|
November 19th, 2009, 10:09 AM | #12 |
ninjette.org sage
Name: J.G.
Location: Austin
Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959
|
I know I'll take an undertail exhaust - can't wait for pics.
|
|
November 19th, 2009, 11:26 AM | #13 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
Sorry for hi jacking the thread Matt....I really feel bad that it went from a serious thread to one about a product that hasn't been made yet...I feel so bad that I'm willing to test out the first one made to make up for it
__________________________________________________
Using Pedal Power |
|
November 19th, 2009, 12:57 PM | #14 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Lol no problem its an exhaust coimg soon and you want it therefore it is interest. All I know is that this will be the first sportisi exhaust that has the option for CF (VR is as well). The VRX is not going to Cost the amount of 5 VR6's. And honest I do not know how much it will sell for either. I like to keep the costs to you guys way down when it comes to accessories and performance. It is great for you guys but I don't make enough to notice I'm making money. I'm certain that just because this is an undertail exhaust that there will be interest in it regardless of the price. At the same time charging $1000 for it is nuts. I think the price sweet spot is somewhere between $400 and $600 in the end. Rob I will hook you up as a tester.
__________________________________________________
Sportisimoto USA is born. |
|
November 19th, 2009, 01:31 PM | #15 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
Cool. Is there going to be a mounting point for an undertail plate holder? Or should I start thinking about how to make one to go around the exhuast? Either way shouldn't be that hard
__________________________________________________
Using Pedal Power |
|
November 19th, 2009, 01:35 PM | #16 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Yes there will be a holder.
__________________________________________________
Sportisimoto USA is born. |
|
November 24th, 2009, 05:36 AM | #17 |
ninjette.org member
Name: Matthew
Location: New York
Join Date: Aug 2009 Motorcycle(s): None Posts: 87
|
Interested.
|
|
December 5th, 2009, 01:52 AM | #18 |
ninjette.org member
Name: Corey
Location: Madison, WI
Join Date: Nov 2009 Motorcycle(s): 2009 Kawasaki 250R, 2008 Genuine Buddy 50 Posts: 121
|
Not sure if you did the GB for the exhaust systems yet but I might be interested. Could you tell me a little more about the V6R system? What's the noise level like? I saw the video of the V6 on your site but would like to get an idea of the sound levels of the quiet version. I'm currently ditching a Two Brothers because it's too loud and don't want to run into the same problem. I had been leaning towards the AP quiet core but like the look of the shorter flat tailed cans. Any way you might be able to provide decibel levels? Also I assume the price would be for a complete exhaust, not just a slip on?
|
|
December 5th, 2009, 11:26 AM | #19 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Yup complete system. the quiet costs a tad more. Having had a TB previously the VR6 is quieter and the quiet core is even quieter. The sound level is compareable to the AP units. I never was able to get my hands on a db meter.
__________________________________________________
Sportisimoto USA is born. |
|
December 8th, 2009, 05:28 PM | #20 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
you wouldn't have an header laying around, I will be doing track days and I think that I will have to change the header before then to kick the pipe back in
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 8th, 2009, 05:40 PM | #21 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I'm going to be placing another order in a few days I can get one for you.
__________________________________________________
Sportisimoto USA is born. |
|
December 8th, 2009, 06:00 PM | #22 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
Well it really depends on how much it will cost b/c I am thinking about going down somewhere to see if they can make something for me like a small mid pipe to bring it back in
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 8th, 2009, 06:13 PM | #23 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
That would be Cheaper
__________________________________________________
Sportisimoto USA is born. |
|
December 8th, 2009, 06:23 PM | #24 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
I do not know at this time, the header would be cool so i do not have a crazy looking pipe
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 8th, 2009, 07:19 PM | #25 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Cost is $130
__________________________________________________
Sportisimoto USA is born. |
|
December 8th, 2009, 07:23 PM | #26 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
I will have to get back with you in a few days if my ebay listing gose well i will
http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 8th, 2009, 07:35 PM | #27 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Selling glasses to pay for mods. lol
__________________________________________________
Sportisimoto USA is born. |
|
December 8th, 2009, 07:38 PM | #28 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
no no i just pick up somthing that i ended up not likeing and I am trying to get some of my monye back
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 9th, 2009, 04:47 PM | #29 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
em your way, i found a shop that will make me somthing this weekend will post some pics sunday
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 17th, 2009, 09:24 PM | #30 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
hey matt this is what I had made for me it really kicked it back in so I should be legal for my 1st track day in march, I also used black header wrap I really did not want to polish the mid pipe and I like the way the wrap looks. I also moded an exhaust hanger to work with it
pic befor and after
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
December 17th, 2009, 09:48 PM | #31 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Nice
__________________________________________________
Sportisimoto USA is born. |
|
January 5th, 2010, 02:08 PM | #32 |
ninjette.org member
Name: Zim
Location: Bay Area
Join Date: Dec 2009 Motorcycle(s): '04 EX250F Posts: 65
|
Very intestested, except I have a classic. Any chance of making a full exhaust for the EX250F?
|
|
January 5th, 2010, 04:06 PM | #33 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
nope
__________________________________________________
Sportisimoto USA is born. |
|
January 6th, 2010, 03:21 PM | #34 |
ninjette.org member
Name: Matthew
Location: New York
Join Date: Aug 2009 Motorcycle(s): None Posts: 87
|
how many more do you need for the group buy
|
|
January 7th, 2010, 01:36 PM | #35 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I am placing an order this week. If you want an exhaust then pm me
__________________________________________________
Sportisimoto USA is born. |
|
February 1st, 2010, 07:20 PM | #36 |
ninjette.org newbie
Name: Jose
Location: OC-CA
Join Date: Feb 2010 Motorcycle(s): 09 250R Posts: 1
|
Any news on that undertail ?
|
|
February 26th, 2012, 03:15 PM | #37 |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
Did you make an undertail kit ?
|
|
February 26th, 2012, 07:51 PM | #38 |
Dakine...
Name: AJ
Location: DFW
Join Date: Jun 2011 Motorcycle(s): 2009 Ninja 250R (Sold) | 636 (hopefully soon) Posts: A lot.
Blog Entries: 5
|
also interested in an undertail exhaust. depending on its final costs etc. so will this be a full system or slip on? I'll check back for more details regarding this.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gauging interest for a MD to PA weekend ride, next summer. | subxero | Group Rides and Local Events | 128 | June 8th, 2013 03:29 PM |
gauging interest in the tristate or who ever | fizzer914 | Group Rides and Local Events | 2 | June 24th, 2012 12:35 PM |
Gauging Interest: Gear Indicators (one with shift light, one without shiftlight) | SlowBoyRacing | Motorcycle-related | 13 | March 2nd, 2012 11:27 PM |
Hazard lights kit- Gauging interest | CThunder-blue | Motorcycle-related | 8 | July 2nd, 2011 08:34 PM |
|
|