December 18th, 2008, 10:56 PM | #1 |
Master of the ZZR
Name: Brian
Location: Hamilton
Join Date: Dec 2008 Motorcycle(s): 2005 Kawasaki 250 ZZR Posts: 56
|
What would you think of....
A ninjette with 100% carbon fiber body?
A buddy of mine hit some gravel on a corner and slid his cracking all the fairings on the right hand side. Then, to add insult to injury, the bike hit the curb, and flipped over onto the left side and broke all those fairings too :P So his bike is totaled! Cosmetically speaking... the slide was low speed, so its probably okay mechanically speaking (but thats not what this thread is about)... I was thinking of lending him my fairings as molds so that he could fabricate some new ones. The grand total to have all 7 fairings replaced was just over $900. Since we are college students, I would think that he could make fiberglass parts for much cheaper... He suggested carbon fiber... Do you think it would look good?? And to VeX, how much do you think that much carbon fiber, resin and bondo would cost? |
|
December 18th, 2008, 11:21 PM | #2 |
ninjette.org sage
Name: Andy
Location: Sheboygan, WI
Join Date: Dec 2008 Motorcycle(s): 1988 Honda Hawk NT650, 1989 Honda Hawk NT650, 1997 GSXR750 Track Bike Posts: 890
|
I'd think making them out of carbon fiber would most likely be over $900? Do either of you have any fiberglassing experience?
|
|
December 18th, 2008, 11:30 PM | #3 |
Master of the ZZR
Name: Brian
Location: Hamilton
Join Date: Dec 2008 Motorcycle(s): 2005 Kawasaki 250 ZZR Posts: 56
|
|
|
December 19th, 2008, 10:25 AM | #4 |
Über n00b
Name: Bob
Location: Alberta, Canada
Join Date: Dec 2008 Motorcycle(s): Triumph TT600, Honda NS50F, Kawasaki ZZR-250 (sold) Posts: 225
|
Unless you guys have the ability to do it yourself, I'd say no.
May not matter to him, but I wouldn't be surprised if he got a lot of flak for having a carbon fiber bodied 250. Some people eh. Personally I don't think carbon fiber would compliment the ninja 250 body very well. Fiberglass would be a better option I'd think. Although I don't know how well the fiber glass would hold up if the bike were to be dropped. |
|
December 19th, 2008, 12:38 PM | #5 |
ninjette.org member
Name: Anthony
Location: Marble Hill, MO
Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231
|
He'd be better off buying a replacement set of fairings off of eBay or the classifieds somewhere. Or just make it into a naked streetfighter.
__________________________________________________
1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page. |
|
December 19th, 2008, 01:00 PM | #6 |
Master of the ZZR
Name: Brian
Location: Hamilton
Join Date: Dec 2008 Motorcycle(s): 2005 Kawasaki 250 ZZR Posts: 56
|
|
|
December 19th, 2008, 01:07 PM | #7 | |
Master of the ZZR
Name: Brian
Location: Hamilton
Join Date: Dec 2008 Motorcycle(s): 2005 Kawasaki 250 ZZR Posts: 56
|
Quote:
Oh, and if the fiberglass is done using epoxy resin, then it would hold up better than the ABS plastic fairings.. |
|
|
December 19th, 2008, 02:16 PM | #8 | |
Über n00b
Name: Bob
Location: Alberta, Canada
Join Date: Dec 2008 Motorcycle(s): Triumph TT600, Honda NS50F, Kawasaki ZZR-250 (sold) Posts: 225
|
Here's a bike done up fully in carbon fiber for your viewing pleasure,
Quote:
Ever seen one without em? There's way too much empty space between the front wheel and the engine. Looks hella dorky. |
|
|
December 19th, 2008, 02:41 PM | #9 |
Master of the ZZR
Name: Brian
Location: Hamilton
Join Date: Dec 2008 Motorcycle(s): 2005 Kawasaki 250 ZZR Posts: 56
|
I think the carbon fiber actually looks kinda good haha... mind you that picture is really weird (there are some pretty bad spots of glare where it appears 100% black)
|
|
December 19th, 2008, 05:34 PM | #10 |
Über n00b
Name: Bob
Location: Alberta, Canada
Join Date: Dec 2008 Motorcycle(s): Triumph TT600, Honda NS50F, Kawasaki ZZR-250 (sold) Posts: 225
|
Well that's carbon fiber for ya, when there's a bunch of funky curves like that.
|
|
December 19th, 2008, 05:54 PM | #11 |
Some weird Canuck!
Name: Greg
Location: Ontario - Canada
Join Date: Dec 2008 Motorcycle(s): '92 CBR250RR "Babyblade", 2008 Ninja 250R, 2001 CBR600F4i Posts: 209
|
I would streetfighter it myself.
Just come up with something creative for a little chin fairing if you need. |
|
December 19th, 2008, 07:19 PM | #12 |
That's me!
Name: TJ
Location: Ames, IA
Join Date: Nov 2008 Motorcycle(s): 2008 Ninja 250r (Tis blue), 2008 CBR600RR Posts: 454
|
I have a roll of CF/Kevlar mesh that I use for making smaller panels. I was thinking about making fairings with it, but damn the mold would be a bitch to make. I'd prefer to do a glove mold, but the $$ for the silicone would creep up there plus to do it right you'd need a good heat source and all for the vacuum bagging. It'd be neat though . CF gas tanks for like ZX-10r's are out there and they're like $1,800!
It's not that the materials are expensive, but CF is labor intensive like no other! You literally spend days worth of work making the reverse of the molds PERFECT as any imperfections will show up in the mold and then the CF. Hell whenever I do my dash with an aftermarket gauge assembly I won't even use the CF for that. |
|
December 19th, 2008, 08:31 PM | #13 | |
Master of the ZZR
Name: Brian
Location: Hamilton
Join Date: Dec 2008 Motorcycle(s): 2005 Kawasaki 250 ZZR Posts: 56
|
Quote:
On a side note... would 100% fiberglass panels be heavier than ABS panels? How much more weight would you add do you think? |
|
|