September 13th, 2019, 09:27 PM | #1 |
ninjette.org member
Name: Joe
Location: Provo
Join Date: Sep 2019 Motorcycle(s): 2007 Ninja 250R + 2001 Ninja 500R = 666 PreGen500BMF Posts: 62
|
07 ninja ex250. Interference or non interference motor?
Let's say my timing chain breaks or tensioner doesn't do its job or something of that nature are the valves going to crash into the Pistons?
__________________________________________________
We can rebuild her...07Ex2fifty |
|
September 14th, 2019, 12:23 AM | #2 |
ninjette.org member
Name: Joe
Location: Provo
Join Date: Sep 2019 Motorcycle(s): 2007 Ninja 250R + 2001 Ninja 500R = 666 PreGen500BMF Posts: 62
|
I'm pretty new to bikes. I have been turning a wrench since I was old enough to hold one. So they're still a fair amount of things I'm not aware of. For example for all I know all motorcycle motors are non interference. Haha
__________________________________________________
We can rebuild her...07Ex2fifty |
|
September 14th, 2019, 12:25 AM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Hi and welcome to Ninjette!!!
Pretty much all motorcycles are interference due to high-compression. I have yet to see bike that isn't, and I've owned about 30 of them. Most autos are interference too. Only exception is Toyota. Even then, not all of them. Last futzed with by DannoXYZ; September 15th, 2019 at 12:14 AM. |
|
September 14th, 2019, 05:27 PM | #4 |
ninjette.org member
Name: Joe
Location: Provo
Join Date: Sep 2019 Motorcycle(s): 2007 Ninja 250R + 2001 Ninja 500R = 666 PreGen500BMF Posts: 62
|
Thank you sir.
__________________________________________________
We can rebuild her...07Ex2fifty |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
brake caliper interference recall | algs26 | 2013 - 2017 Ninja 300 Tech Talk | 47 | May 13th, 2014 05:23 PM |
Hotbodies Race Bodywork interference with Woodcraft handlebars | abhijitz | Ninjettes At Speed | 10 | March 23rd, 2012 07:17 AM |
Thread Tools | |
|
|