Lucas oil

nate-bama · June 24th, 2009, 12:50 PM

i just turned 5200 miles and am starting a switch to synthetic oil. Im using lucas 10w40 semi synthetic m/c oil first and the next time i change it ill go full synthetic. Maybe its just cause this stuff was like seven bucks a quart but after a little ride she seems to run smoother. Any one else try this stuff

TnNinjaGirl · June 24th, 2009, 01:08 PM

I use the Lucas Oil Stabilizer all of the time in older vehicles or vehicles with tapping valves or spun bearings. Works great for delaying the inevitable rebuild. Seems to keep everything nice and lubricated too. Also have used the Transmission Fluid Stabilizer with good success. I'd reccomend their products to anyone (Lucas Oil that is, not Lucas electronics

).

nate-bama · June 24th, 2009, 02:17 PM

my engine feels like it pulls harder now

Snake · June 24th, 2009, 03:05 PM

I have used Lucas upper cylinder lubricant / fuel injector cleaner with very good results. Do they also make a full synthetic M / C oil?

nate-bama · June 24th, 2009, 04:59 PM

i dont know if they make a full...this is a blend

June 24th, 2009, 12:50 PM	#1
nate-bama North Alabama Mtn. ryder Name: Nate Location: Alabama Join Date: May 2009 Motorcycle(s): 2006 Posts: 537	Lucas oil i just turned 5200 miles and am starting a switch to synthetic oil. Im using lucas 10w40 semi synthetic m/c oil first and the next time i change it ill go full synthetic. Maybe its just cause this stuff was like seven bucks a quart but after a little ride she seems to run smoother. Any one else try this stuff __________________________________________________ QTRltrPWR

June 24th, 2009, 02:17 PM	#3
nate-bama North Alabama Mtn. ryder Name: Nate Location: Alabama Join Date: May 2009 Motorcycle(s): 2006 Posts: 537	try lucas! my engine feels like it pulls harder now __________________________________________________ QTRltrPWR

June 24th, 2009, 04:59 PM	#5
nate-bama North Alabama Mtn. ryder Name: Nate Location: Alabama Join Date: May 2009 Motorcycle(s): 2006 Posts: 537	i dont know if they make a full...this is a blend __________________________________________________ QTRltrPWR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[roadracingworld.com] - Lucas Oil Products Founder Forrest Lucas Will Be On Dave Desp	Ninjette Newsbot	Motorcycling News	0	September 2nd, 2014 02:00 PM
[motorcycledaily.com] - Captivating Competition Resumes on Saturday as Lucas Oil Pr	Ninjette Newsbot	Motorcycling News	0	June 27th, 2014 07:10 AM
[cyclenews.com] - Lucas Oil MX Park At Starwest Now Open	Ninjette Newsbot	Motorcycling News	0	October 21st, 2013 07:00 PM
[motorcyclistonline] - Lucas Oil Purchases MAVTV	Ninjette Newsbot	Motorcycling News	0	September 30th, 2011 09:30 PM
[topix.net] - Lucas Oil Racing Series Prepares for '11	Ninjette Newsbot	Motorcycling News	0	March 5th, 2011 10:30 PM

June 24th, 2009, 01:08 PM	#2
TnNinjaGirl Ms. Personality Name: CB Location: Murvill, TN Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.	I use the Lucas Oil Stabilizer all of the time in older vehicles or vehicles with tapping valves or spun bearings. Works great for delaying the inevitable rebuild. Seems to keep everything nice and lubricated too. Also have used the Transmission Fluid Stabilizer with good success. I'd reccomend their products to anyone (Lucas Oil that is, not Lucas electronics ).

June 24th, 2009, 03:05 PM	#4
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	I have used Lucas upper cylinder lubricant / fuel injector cleaner with very good results. Do they also make a full synthetic M / C oil?