November 25th, 2016, 10:05 PM | #1 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
2010 250R Part Out
This 2010 250r had 4,5xx miles on it. Please let me know what you need and I can get back to you with pics, etc.
Bike had no title and was used as a track bike for 3 months and raced 3 times. Engine ran strong and was running fine after crash. Subframe got a bit tweaked, I was thinking of rebuilding it and chopping it off behind the seat. Headlights and tail lights were off the bike and are available. Let me know what you are looking for and I'll see what I can do. I WILL UPDATE THIS POST WITH PARTS SOLD. So if you see inquiries about a part you want, but it is not listed as sold on this post, assume I still have it. SOLD/UNAVAILABLE PARTS: front fairing stay right side footpeg assembly no body work Wheels: Very good condition -- 8.5/10 Tread on front tire if any interest in using them for street riding. They were tracked and I would not recommend doing any gangster leans on them. Still perfectly good for commuting or chill rides. They can be removed if desired. No charge if you want them. Rear: So I found the reason I lowsided at VIR. Somehow, I picked up a nail in the rear tire during a race. Tire is plugged and good for commuting or chill riding. I've plugged a few tires on my R6 over the last 12 years with success and thousands of miles. I do not suggest railing on a plugged tire. Again, can be removed, or comes free if you'd like them. Last futzed with by shift957; December 14th, 2016 at 11:56 AM. |
|
November 25th, 2016, 10:16 PM | #2 |
ninjette.org sage
Name: -
Location: somewhere cold
Join Date: Jun 2013 Motorcycle(s): 2010 Ninja 250 Posts: 596
Blog Entries: 1
|
Free for the next guy. Last futzed with by Flying; November 27th, 2016 at 01:33 AM. |
|
November 27th, 2016, 12:53 AM | #3 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
|
|
November 28th, 2016, 08:00 AM | #4 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
are the rims good and how much would you want for them?
|
|
November 28th, 2016, 12:04 PM | #5 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
At a glance, they looked fine. I keep the bike at another location, so I'll have to go over, put it on stands and give a close inspection of them. Price determined on their actual condition. I'll get back to you once I check them out.
|
|
November 28th, 2016, 03:26 PM | #6 |
ninjette.org sage
Name: Bob
Location: NY
Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730
|
Would you be willing to remove the carb assembly and sell it ?
__________________________________________________
2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder- |
|
November 28th, 2016, 04:51 PM | #7 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
|
|
November 29th, 2016, 07:36 AM | #8 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
ok when you get to it just let me know. thank you.
|
|
November 29th, 2016, 09:21 AM | #9 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
I'll take the "bent" forks. I just really want the fork springs inside ( with spacers ). Shipped to 02779. PM me with price + shipping please.
__________________________________________________
... can't stop updating the bike! |
|
November 29th, 2016, 04:34 PM | #10 |
L8APEX
Name: CRA#33 EXPERT
Location: Mankato, MN
Join Date: Nov 2011 Motorcycle(s): 07 KTM 950SMR, 06 KTM 450SMR, 99 KTM 300MXC, 00 Derbi GPR 50, 09 Ninja 250 racebike, race with www.cra-mn.org! Posts: 233
|
What kind of shock? Price?
__________________________________________________
www.joemillersmoderngarage.com www.starr-cycle.com ***The most important concept of science isn't memorizing facts, it's observation of phenomena.*** |
|
November 29th, 2016, 07:08 PM | #11 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
Trying to take pictures and upload them on photobucket from my phone, which I normally do without issue, but every time I hit the upload button, it wants me to sign in -- even though I am already signed in and in the folder I want to upload to. Sorry for the delay.
|
|
November 29th, 2016, 07:10 PM | #12 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
|
|
November 30th, 2016, 08:59 AM | #13 |
L8APEX
Name: CRA#33 EXPERT
Location: Mankato, MN
Join Date: Nov 2011 Motorcycle(s): 07 KTM 950SMR, 06 KTM 450SMR, 99 KTM 300MXC, 00 Derbi GPR 50, 09 Ninja 250 racebike, race with www.cra-mn.org! Posts: 233
|
__________________________________________________
www.joemillersmoderngarage.com www.starr-cycle.com ***The most important concept of science isn't memorizing facts, it's observation of phenomena.*** |
|
December 2nd, 2016, 09:37 AM | #15 | |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
Quote:
|
|
|
December 2nd, 2016, 09:41 AM | #16 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
I pmd you back, and if you truly are Griswold with the lights, I wouldn't mind seeing a pic of it.
|
|
December 2nd, 2016, 11:06 AM | #17 |
ninjette.org member
Name: Nate
Location: Central North Carolina
Join Date: Aug 2016 Motorcycle(s): R6, SV 650, 300, 250, 250 xc-w Posts: 73
|
|
|
December 2nd, 2016, 12:27 PM | #18 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
That's lot more than i got. I'm going to go buy them little projector lights that light the house up and be done with it, but what I would like to do is get a Grinch figurine put it in front of the house, and have just a strand of lights going a little ways on the roof then run down to the Grinch.
|
|
December 2nd, 2016, 10:47 PM | #19 |
ninjette.org member
Name: Cody
Location: Wilmington, NC
Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249
|
PM you
|
|
December 12th, 2016, 10:25 AM | #20 |
ninjette.org member
Name: Cody
Location: Wilmington, NC
Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249
|
Still interested in rear shock and maybe other parts.
|
|
January 4th, 2017, 12:51 PM | #21 |
ninjette.org newbie
Name: Sean
Location: Augusta Georgia
Join Date: Jul 2016 Motorcycle(s): Just the 250r...for now Posts: 2
|
I'm interested in the headlight and the left side (shifter-side) footrest bracket and the gear shift lever.
|
|
February 10th, 2017, 02:07 PM | #22 |
ninjette.org member
Name: Nathaniel Smith
Location: south tx
Join Date: Feb 2017 Motorcycle(s): 2005 ninja 250 Posts: 15
|
Handlebars and rear shock?
|
|
February 14th, 2017, 04:47 AM | #23 |
Professional Carb Cleaner
Name: Travis
Location: Pace, FL
Join Date: Jan 2017 Motorcycle(s): EX250, CRF 150, CRF 100(x2), CRF70 Posts: 40
|
Front rim still available?
__________________________________________________
WERA #13 |
|
February 16th, 2017, 08:11 PM | #24 |
ninjette.org newbie
Name: Edward
Location: Tampa, FL
Join Date: Nov 2014 Motorcycle(s): Ninja 250r Posts: 4
|
Lights
Are the front and rear signals or the brake light assembly available?
|
|
March 2nd, 2017, 08:34 PM | #25 |
ninjette.org newbie
Name: C
Location: SAN JOSE
Join Date: Mar 2017 Motorcycle(s): ninja 250 Posts: 4
|
Can I buy the Headlight, Ignition /w key and ignition surrounding (the part he handles and ignition bolt into) Gas tank lock (that works with that key)
|
|
March 5th, 2017, 01:04 PM | #26 |
ninjette.org newbie
Name: brad
Location: missouri
Join Date: Feb 2017 Motorcycle(s): 250 Posts: 5
|
Pmd,
|
|
March 26th, 2017, 10:45 AM | #27 |
ninjette.org newbie
Name: Valerio
Location: jacksonville, fl
Join Date: Mar 2017 Motorcycle(s): too many to list Posts: 1
|
is anything still available
|
|
March 27th, 2017, 06:12 AM | #28 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
Just so you guys all know, I haven't had contact with him sense a little after Dec 2nd. Maybe some one else has had contact sense me on here, and they can let us know the last contact. Not sure what happened, maybe and this is worse case scenario but he might of passed away. I hope I'm wrong and he just stopped coming on to the page.
|
|
March 27th, 2017, 06:17 AM | #29 |
ninjette.org member
Name: Cody
Location: Wilmington, NC
Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249
|
Doubtful. Probably either sold whole bike or lost interest in selling on here. This happens all the time on forums.
|
|
April 20th, 2017, 06:26 AM | #30 |
Daily Jap rider
Name: Lance
Location: La Porte
Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.
|
Do you happen to have the right handle bar still. I just need the bar itself, non of the instruments on it
__________________________________________________
"Most motorcycle problems are caused by the nut that connects the handlebars to the saddle." - author unknown |
|
April 24th, 2017, 01:15 PM | #31 |
ninjette.org member
Name: B
Location: Broward County Fl
Join Date: Feb 2017 Motorcycle(s): 08 Ninja 250r Posts: 10
|
how much for engine?
|
|
May 10th, 2017, 11:29 AM | #32 |
ninjette.org guru
Name: Eduardo
Location: Hollywood, Calirfnia
Join Date: Mar 2012 Motorcycle(s): 2010 Kawasaki Ninja 250r special edition Posts: 286
|
Are the Rotors still available? Rotor thickness?
|
|
June 7th, 2017, 09:44 PM | #33 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
OP hasn't been back to this thread since Dec 14, 2016.
@shift957 - should I close this for sale thread?
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Part Out 2010 Blue Ninja 250 | Jred | Motorcycle-related | 63 | January 19th, 2014 10:06 PM |
[topix.net] - The 2010 Bike EXIF Top 10, Part II | Ninjette Newsbot | Motorcycling News | 0 | December 25th, 2010 08:50 PM |
[topix.net] - 2010 Superbike Smackdown Video - Part 1 | Ninjette Newsbot | Motorcycling News | 0 | May 8th, 2010 07:40 AM |
[superbikeplanet.com] - 2010 Multistrada Review Part Three, Tech Overview | Ninjette Newsbot | Motorcycling News | 0 | March 30th, 2010 10:30 AM |
|
|