Oil change at 62 miles & 15/41 sprockets

JoeLansing · July 17th, 2011, 02:22 PM

I just dropped by to see where the rubber rings go that came with my oil filter. I should've dropped by here first so I would've thought to put the bike up on the rear stand to do it

I forgot to put a mega magnet in the oil spill to check for metal but oh well.

I got these in yesterday http://lotsoffun.org/share/newgen-sprockets.jpg. They came from http://stores.ebay.com/Jawzys-Powersports on Ebay. He has them as singles, or as a kit with chain for both newgen and classic. Ignore the photos on his auctions. He only has classic front sprocket photos, even though it's the right one for newgen. So now I need to go to Harbor Freight and get http://www.harborfreight.com/12-elec...nch-68099.html (I have a $10 off coupon for it) and then 17,24,27mm impact sockets to swap them out? Thanks to you guys I'm sure I got the right sprockets. I'm thinking that cheezy impact wrench will work ok. Even their 12v car one busts off any lug nut, but it takes a while.
- Joe

Snake · July 17th, 2011, 02:29 PM

Oil change DIY http://www.ninjette.org/forums/showthread.php?t=10780

CZroe · July 17th, 2011, 05:12 PM

I don't really see the kit you bought. It sounds like a good deal though. Is it an O-ring chain?

I found the sprockets slightly cheaper elsewhere and then got a $27 blue O-ring chain from D2moto (used "WS40" 40% off coupon code).

JoeLansing · July 17th, 2011, 05:46 PM

Quote:

Originally Posted by CZroe

I don't really see the kit you bought. It sounds like a good deal though. Is it an O-ring chain?

I found the sprockets slightly cheaper elsewhere and then got a $27 blue O-ring chain from D2moto (used "WS40" 40% off coupon code).

I didn't buy a "kit" because at 60 miles I don't really need a chain yet. I bought them as individual auctions. I ended up paying about $55 for both sprockets including shipping. I could've got it cheaper someplace else, but I was scared of not getting the right parts and I'd already exchanged emails with them confirming the front sprocket was the right one and I wouldn't need any shims. They only offer kits with the chain. Like this for Newgen: http://cgi.ebay.com/ebaymotors/Chain...#ht_1332wt_940

- Joe

July 17th, 2011, 02:22 PM	#1
JoeLansing ninjette.org member Name: Joe Location: Lansing, MI Ghetto Join Date: May 2011 Motorcycle(s): Green 2011 SE 52yo Geezer Posts: 122	Oil change at 62 miles & 15/41 sprockets I just dropped by to see where the rubber rings go that came with my oil filter. I should've dropped by here first so I would've thought to put the bike up on the rear stand to do it I forgot to put a mega magnet in the oil spill to check for metal but oh well. I got these in yesterday http://lotsoffun.org/share/newgen-sprockets.jpg. They came from http://stores.ebay.com/Jawzys-Powersports on Ebay. He has them as singles, or as a kit with chain for both newgen and classic. Ignore the photos on his auctions. He only has classic front sprocket photos, even though it's the right one for newgen. So now I need to go to Harbor Freight and get http://www.harborfreight.com/12-elec...nch-68099.html (I have a $10 off coupon for it) and then 17,24,27mm impact sockets to swap them out? Thanks to you guys I'm sure I got the right sprockets. I'm thinking that cheezy impact wrench will work ok. Even their 12v car one busts off any lug nut, but it takes a while. - Joe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[motorcyclenews.com - news] - How to change your chain and sprockets	Ninjette Newsbot	Motorcycling News	0	June 26th, 2014 10:00 AM
Is it normal for oil to increase a bit in the crankcase after an oil change?	cadd	2008 - 2012 Ninja 250R Tech Talk	10	May 15th, 2014 08:38 PM
Is it time to change the sprockets and chain?	bkh2	2008 - 2012 Ninja 250R Tech Talk	4	April 30th, 2012 06:58 AM
Oil change-190 miles-filter too?	wild-bill	2008 - 2012 Ninja 250R Tech Talk	19	June 20th, 2011 12:54 PM
1st oil change 600 miles, 2qts too much?	dimeified	2008 - 2012 Ninja 250R Tech Talk	5	August 18th, 2009 07:38 AM

July 17th, 2011, 02:29 PM	#2
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Oil change DIY http://www.ninjette.org/forums/showthread.php?t=10780

July 17th, 2011, 05:12 PM	#3
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	I don't really see the kit you bought. It sounds like a good deal though. Is it an O-ring chain? I found the sprockets slightly cheaper elsewhere and then got a $27 blue O-ring chain from D2moto (used "WS40" 40% off coupon code).