November 29th, 2018, 08:37 AM | #1 |
ninjette.org guru
Name: Al
Location: Orange County, CA
Join Date: Dec 2015 Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold) Posts: 263
|
Ninja 300/250 Parts - Racetech PCV Exhaust ETC
PM with an email address for photos. Prices include CONUS shipping except for bodywork and gas tank.
Should fit at least 2008+ 250/300: Spears Racing no-drill Toe Sprocket Chain Guard Shark Fin - $40 (some small scratches, but otherwise great; required for some racing organizations and good to have in general; Spears lists it for both 250 and 300) PSR SBK footpegs for OEM rearsets - $20 (some end scuffs; huge upgrade from OEM footpegs for 08+ 250/300) Set of ebay replica OEM rearsets - $35 (brand new in the bag; these are complete OEM replacements, including shift and brake levers; buy with the PSR footpegs for $50) Rest below are probably 300 only: Healtech GIPro DS gear indicator plug and play - $55 (casing has scuffing and cable has a small patch section where the shielding wore through, but functions perfectly) Woodcraft under fairing frame sliders - $40 (sliders have scuffing but are 95% there; bolt has a small bend at the tip, does not affect installation) For local pick up (Orange County, CA) or shipping extra: Catalyst Composite Fairings - $150 (has damage that needs to be repaired; right side of tail needs a patch; right side of the front fairing needs a patch; one of the mounting tabs on the front is half broken ) Black gas tank - $80 (no dents; one corner of the tank had a scuff and was repainted with an off-color black; has stomp grip grips and will include a set of the lower fairing stomp grips; no fuel pump or gas cap) _____________ Exhaust - SOLD PCV - SOLD PVC map switch - SOLD Front suspension - SOLD R&G Racing Engine Case Cover Set - SOLD Yoshimura Rearset risers - SOLD Last futzed with by Mechanikrazy; January 8th, 2019 at 12:30 AM. Reason: update for 250 usage |
|
November 29th, 2018, 10:18 AM | #2 |
ninjette.org guru
Name: Pat
Location: SW VA
Join Date: Feb 2015 Motorcycle(s): 286, 296, 599, 799 Posts: 436
|
is that for the complete forks? if so I'm interested along with the Yosh risers
|
|
November 29th, 2018, 10:50 AM | #3 | |
ninjette.org guru
Name: Al
Location: Orange County, CA
Join Date: Dec 2015 Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold) Posts: 263
|
Quote:
If you're still interested in anything, send a PM if you want photos or payment info. |
|
|
December 4th, 2018, 06:19 PM | #4 |
sammich maker
Name: snot
Location: West Ohio - in the kitchen
Join Date: Feb 2012 Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded) Posts: A lot.
MOTM - Apr '15
|
Free bump...
__________________________________________________
https://www.brocksperformance.com/VZ...0035+C450.aspx |
|
December 7th, 2018, 03:05 PM | #5 |
ninjette.org guru
Name: Al
Location: Orange County, CA
Join Date: Dec 2015 Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold) Posts: 263
|
Thanks
Also, 10% off ebay today with PHLDAYTEN so you can save some extra money. The Power Commander and the Exhaust are up there! PCV https://www.ebay.com/itm/223272589164 Two Brothers Full Exhaust https://www.ebay.com/itm/223272593154 |
|
January 4th, 2019, 10:52 AM | #6 |
ninjette.org guru
Name: Al
Location: Orange County, CA
Join Date: Dec 2015 Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold) Posts: 263
|
Bump with price drops!
|
|
April 14th, 2019, 09:09 PM | #7 |
ninjette.org member
Name: CJ
Location: Oregon
Join Date: Mar 2015 Motorcycle(s): Ninja 300, GSXR 600, CBR 500 Posts: 20
|
Hello! do you still have the shark fin?
__________________________________________________
~ The way to go fast is to never slow down ~ |
|
April 29th, 2019, 10:30 PM | #8 |
ninjette.org guru
Name: Al
Location: Orange County, CA
Join Date: Dec 2015 Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold) Posts: 263
|
Update as I cannot edit the original post anymore. PM with an email address for photos. Prices include CONUS shipping except for bodywork and gas tank.
Should fit at least 2008+ 250/300: PSR SBK footpegs for OEM rearsets - $20 (some end scuffs; huge upgrade from OEM footpegs for 08+ 250/300) Rest below are probably 300 only: Healtech GIPro DS gear indicator plug and play - $55 (casing has scuffing and cable has a small patch section where the shielding wore through, but functions perfectly) Woodcraft under fairing frame sliders - $40 (sliders have scuffing but are 95% there; bolt has a small bend at the tip, does not affect installation) For local pick up (Orange County, CA) or shipping extra: Catalyst Composite Fairings - $120 (has damage that needs to be repaired; right side of tail needs a patch; right side of the front fairing needs a patch; one of the mounting tabs on the front is half broken ) Black gas tank - $60 (no dents; one corner of the tank had a scuff and was repainted with an off-color black; has stomp grip grips and will include a set of the lower fairing stomp grips; no fuel pump or gas cap) _____________ Exhaust - SOLD PCV - SOLD PVC map switch - SOLD Front suspension - SOLD R&G Racing Engine Case Cover Set - SOLD Yoshimura Rearset risers - SOLD Rearsets - SOLD Shark fin - SOLD |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? | PartsNinja | Motorcycle-related | 75 | October 23rd, 2016 04:08 PM |
WTB: PCV for Ninja 300 | ULW | Items Wanted | 0 | June 30th, 2016 02:50 PM |
PreGen -- Full race suspenson (Fox Racing, RaceTech) $300 | NealWright | Motorcycle-related | 9 | April 18th, 2016 11:36 AM |
Ninja 250 parts for sale + Muzzys exhaust | extremez31 | Motorcycle-related | 13 | May 14th, 2013 12:52 PM |
Thread Tools | |
|
|