August 23rd, 2015, 12:47 PM | #1 |
ninjette.org newbie
Name: Chris
Location: Dover, NH
Join Date: Aug 2015 Motorcycle(s): Ninja ZX6R 2007 600cc Posts: 4
|
2007 ZX6R Clutch Spring Plate/Clutch Spring Direction?
I apologize if this is not in the right category but figured someone would know.
Does anyone know which direction the clutch spring and spring plate face? The spring plate has a flat and slightly beveled edge and the spring has a flat edge and more noticeable curve to it. The shop manual is a bit confusing and my instinct is to put both flat sides going in with bevels facing out (away from bike). These also are more like large metal o-rings than springs but that's the name in the manual. I didn't take notice when I took it apart obviously so any help is appreciated. I also have 3 different width clutch plates and from what I can tell the 2.3 and 2.9 are for the inside and outside and 2.6 are the middle ones. If anyone is familiar with this, any help is greatly appreciated. Thanks again. |
|
August 23rd, 2015, 05:50 PM | #2 |
EX500 full of EX250 parts
Name: Bill
Location: Grand Rapids-ish, MI
Join Date: Jul 2012 Motorcycle(s): '18 Ninja 400 • '09 Ninja 500R (selling) • '98 VFR800 (project) • '85 Vulcan VN700 (sold) Posts: A lot.
Blog Entries: 1
MOTM - Aug '15
|
Does http://www.kawasaki.com/Parts/PartsD.../2007/ZX600P7F help at all?
__________________________________________________
*** Unregistered, I'm not your mom and I'm not paying for your parts, so do whatever you want with your own bike. *** |
|
August 24th, 2015, 03:21 AM | #3 | |
ninjette.org newbie
Name: Chris
Location: Dover, NH
Join Date: Aug 2015 Motorcycle(s): Ninja ZX6R 2007 600cc Posts: 4
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What grade are the clutch spring bolts? | MrAtom | 1986 - 2007 Ninja 250R Tech Talk | 17 | April 29th, 2015 02:35 PM |
New Problem - Broke heads off two clutch spring bolts | indr | 2008 - 2012 Ninja 250R Tech Talk | 1 | June 30th, 2013 11:32 AM |
08+ Barnett Clutch Spring - Reviews? | abhijitz | 2008 - 2012 Ninja 250R Tech Talk | 10 | June 13th, 2013 09:08 AM |
clutch lever "plastic spring pin" | gt_turbo | 2008 - 2012 Ninja 250R Tech Talk | 16 | September 6th, 2011 07:00 PM |
[motorcyclistonline] - All New Barnett Clutch Spring Kits for Ducati | Ninjette Newsbot | Motorcycling News | 0 | October 15th, 2009 12:30 AM |
|
|