|
April 22nd, 2012, 01:38 PM
|
#1 |
|
ninjette.org member
Name: Josh
Location: Regina, Saskatchewan
Join Date: Mar 2012 Motorcycle(s): 1988 Ninja 250 Posts: 52
|
Carb Hose Routing
I had quite a hard time sorting out all the lines going in and out of the carbs, due to the previous owner basically messing with things he shouldn't have been. So resultantly all the vacuum lines were messed up on my carbs, going to the wrong place. After doing some research and referencing of another bike, this is the correct hose routing. Hopefully some of you guys may find this useful!
Last futzed with by jschatte; April 22nd, 2012 at 04:07 PM. |
|
|
|
April 22nd, 2012, 02:13 PM
|
#2 |
|
ninjette.org member
Name: Lostboy
Location: Guelph
Join Date: May 2011 Motorcycle(s): 2002 ZZR 250 Posts: 127
|
Yup that looks about right!
 STICKY!Funny thing I bought a 2nd motor when my first motor blew and it came with carbs. The guy was like yeah i bought this motor and know it works but dont know what the heck to do with the carbs so he sold me half a bike for $400 bucks! what a steal! Luckly i had a second set of carbs to figure out how to route it properly he had everything ass backwards :P If anyone is curious the petcock on the left is to the main and the one on the right is to the reserve |
|
|
|
|
April 25th, 2012, 07:15 PM
|
#3 |
|
ninjette.org member
Name: CalvinAmI
Location: La Vergne, TN.
Join Date: Mar 2012 Motorcycle(s): '09 Ninja 250r [RED] & '06 Ninja 250 [WHITE] Posts: 162
Blog Entries: 1
|
Just pulled my carbs yesterday and am cleaning them tomorrow.
This diagram is PRICELESS!!! Thank you for your hard work. +1 for sticky |
|
|
|
|
June 11th, 2012, 08:16 PM
|
#4 |
|
ninjette.org newbie
Name: Salim
Location: Ca
Join Date: Jun 2012 Motorcycle(s): 99 Ninja ex 250 Posts: 1
|
99 Ex 250 vacuum pulse hose location
I took out the carbs put em back in and connected everything except the vacume pulse hose with the white on the hose it says it connects to the carb but i can't find it, and the junction it shows it should connect too is angled into the the carbs and connected so I don't know wher to connect the other end of this hose.
|
|
|
|
|
June 12th, 2012, 07:42 AM
|
#5 | |
|
ninjette.org member
Name: Josh
Location: Regina, Saskatchewan
Join Date: Mar 2012 Motorcycle(s): 1988 Ninja 250 Posts: 52
|
Quote:
|
|
|
|
|
|
June 18th, 2014, 09:05 PM
|
#6 | |
|
ninjette.org newbie
Name: dean
Location: utah
Join Date: Jun 2014 Motorcycle(s): ninja 250 yz250 kx100 ttr50 Posts: 1
|
is this for a California modle
Quote:
|
|
|
|
|
|
July 8th, 2014, 08:30 AM
|
#7 |
|
ninjette.org member
Name: Alan
Location: Gwinnett County, GA
Join Date: Jul 2014 Motorcycle(s): 04 Ninja 250 Posts: 42
|
Is there an easy way to get those $#@@^$$ little clamps on and off?
I'm not redneck enuf to do it with zipties. Yet. |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2008 250R Carb hose routing? | devildogae | 2008 - 2012 Ninja 250R Tech Talk | 12 | November 6th, 2016 04:32 PM |
| vacuum hose routing | Sebastian f7 | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 28th, 2013 07:06 AM |
| Need Visual Confirmation of Carb Hose Routing | indr | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 23rd, 2013 07:49 PM |
| Routing for fuel overflow hose | haze5736 | 1986 - 2007 Ninja 250R Tech Talk | 3 | July 7th, 2011 07:09 PM |
| Routing for 'side hose' on fuel tank | kobachi | 2008 - 2012 Ninja 250R Tech Talk | 11 | December 12th, 2010 05:00 PM |
|
|
