Rare Area P Sale

kbryant · August 14th, 2009, 11:24 AM

Purchase an Area P full exhaust system for the '08-09 250R with standard carbon fiber or stainless steel muffler and receive over $100 of additional value for FREE!

-
FREE Exhaust Hanger Bracket, FREE D.E.I., and FREE Shipping (within the lower 48 states only). Limited time & quantities offer. No substitutions. You must be a member of Ninjette.org and mention this offer at the time of placing your order. Available to retail customers only. www.areapnolimits.com

Alex · August 14th, 2009, 11:28 AM

Thx Kerry! Hope you have quite a few takers on this offer!

Folks, here's a direct link to the '08/'09 product page on the AreaP site.

noche_caliente · August 14th, 2009, 01:24 PM

kkim · August 14th, 2009, 01:58 PM

lol... he's baaaack!

noche... what are you waiting for?

Snake · August 14th, 2009, 03:36 PM

Sounds like a great deal. I know us pregen owners will get a very good deal as well. We are certainly ready for it.

adouglas · August 14th, 2009, 07:11 PM

Would it be possible to swap the DEI for a break on the Dynojet kit?

I'd be interested in the quiet muffler so the DEI would be pointless.

Thanks.

Verus Cidere · August 14th, 2009, 11:26 PM

Quote:

Originally Posted by kbryant

Purchase an Area P full exhaust system for the '08-09 250R with standard carbon fiber or stainless steel muffler and receive over $100 of additional value for FREE!

-
FREE Exhaust Hanger Bracket, FREE D.E.I., and FREE Shipping (within the lower 48 states only). Limited time & quantities offer. No substitutions. You must be a member of Ninjette.org and mention this offer at the time of placing your order. Available to retail customers only. www.areapnolimits.com

Sorry to dash your hopes, but it doesn't look like you can get anything other than standard length with a D.E.I.

Imthebriman · August 15th, 2009, 01:42 PM

Im waiting for the special pregen sale!!!!

adouglas · August 17th, 2009, 04:27 AM

Quote:

Originally Posted by Verus Cidere

Sorry to dash your hopes, but it doesn't look like you can get anything other than standard length with a D.E.I.

D'oh!

My bad for not actually READING the ad. Sheesh.

kbryant · August 17th, 2009, 08:26 AM

Quote:

Originally Posted by adouglas

D'oh!

My bad for not actually READING the ad. Sheesh.

Actually, we just got a system back from a magazine photo shoot. Long Quiet Carbon Fiber. Installed, never run, still brand new. We may be able to help you out

. Contact us at areapnolimits@sbcglobal.net These normally go really fast.

M-Oorb · August 17th, 2009, 06:38 PM

Ahh great deal Kerry...hopefully you'll get a good amount of takers

wayanlam · August 17th, 2009, 09:13 PM

Quote:

Originally Posted by kbryant

Purchase an Area P full exhaust system for the '08-09 250R with standard carbon fiber or stainless steel muffler and receive over $100 of additional value for FREE!

-
FREE Exhaust Hanger Bracket, FREE D.E.I., and FREE Shipping (within the lower 48 states only). Limited time & quantities offer. No substitutions. You must be a member of Ninjette.org and mention this offer at the time of placing your order. Available to retail customers only. www.areapnolimits.com

FREE D.E.I. : does the DEI also fit into the flat end exhausts? if so, would it sit flush with the flat end, or would the nob be sticking out? might look a little weird maybe (IMO..)

does this promo also apply to the custom 15" exhaust? i would be interested in the flat end 15" carbon exhaust for my 08.

would it be possible to deduct the "free shipping" from the international shipping cost? he he... you told me it would cost around $85.00 to ship to Indonesia. or is that fixed~

I'm still searching for some friends that plan to come over from the states to carry it for me, and save me the international shipping fee, but they might all be fully capped already.

kbryant · August 18th, 2009, 08:10 AM

Quote:

Originally Posted by wayanlam

FREE D.E.I. : does the DEI also fit into the flat end exhausts? if so, would it sit flush with the flat end, or would the nob be sticking out? might look a little weird maybe (IMO..)

does this promo also apply to the custom 15" exhaust? i would be interested in the flat end 15" carbon exhaust for my 08.

would it be possible to deduct the "free shipping" from the international shipping cost? he he... you told me it would cost around $85.00 to ship to Indonesia. or is that fixed~

I'm still searching for some friends that plan to come over from the states to carry it for me, and save me the international shipping fee, but they might all be fully capped already.

The D.E.I. is designed for the traditional turn down exit tip only. Promo is for standard length mufflers (12"). Yes, we would allow the "credit" for domestic shipping cost to be applied to international cost.

razorback · August 23rd, 2009, 01:59 PM

Just got the Area P exhaust on my bike...love, Love, LOVE IT!!! Sounds and looks great..thx Kerry!

kkim · August 23rd, 2009, 02:00 PM

Quote:

Originally Posted by razorback

Just got the Area P exhaust on my bike...love, Love, LOVE IT!!! Sounds and looks great..thx Kerry!

have you rejetted/shimmed?

razorback · August 23rd, 2009, 04:24 PM

The bike had been rejetted earlier because I had trouble starting it and it was sluggish and not running right. It ran great after rejetting, but now it needs some adjusting b/c it wants to backfire a little when letting off the throttle with the new exhaust. Otherwise, it runs great, can feel the difference in increase h/p and it sounds REALLY good!!!

kkim · August 23rd, 2009, 04:26 PM

backfiring can be fixed by removing the Kleen system.

wayanlam · August 23rd, 2009, 06:10 PM

Quote:

Originally Posted by razorback

The bike had been rejetted earlier because I had trouble starting it and it was sluggish and not running right. It ran great after rejetting, but now it needs some adjusting b/c it wants to backfire a little when letting off the throttle with the new exhaust. Otherwise, it runs great, can feel the difference in increase h/p and it sounds REALLY good!!!

which exhaust did you get?

are you using a stage 2 jet kit?

im ready to get myself the 15" flat end exhaust i think, cant wait to finally get it and im praying to god that installing the jet kit wont be too hard. ive been tempted to get a local exhaust due to them being a fair bit cheaper (like half the price), but the thought of having top quality VS. local quality... lol well, go figure

oh, and getting two bros / Yoshi exhausts from an importer here costs more than having the area p shipping it to me, so that made a decisive difference too, they sell for around $750~950 here or something.

ive seen a locally made yoshi too, no idea what that costs (was on a bike i saw parked somewhere). but without even opening her up you could see the difference in quality!

kbryant · August 24th, 2009, 08:20 AM

Sale ends tomorrow (August 25th)!

wayanlam · August 24th, 2009, 05:46 PM

argh... nothing like putting pressure on us buyers, lol

August 14th, 2009, 11:24 AM	#1
kbryant Area P Name: Kerry Location: SoCal & South Florida Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439	Rare Area P Sale Purchase an Area P full exhaust system for the '08-09 250R with standard carbon fiber or stainless steel muffler and receive over $100 of additional value for FREE! - FREE Exhaust Hanger Bracket, FREE D.E.I., and FREE Shipping (within the lower 48 states only). Limited time & quantities offer. No substitutions. You must be a member of Ninjette.org and mention this offer at the time of placing your order. Available to retail customers only. www.areapnolimits.com

August 14th, 2009, 11:28 AM	#2
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Thx Kerry! Hope you have quite a few takers on this offer! Folks, here's a direct link to the '08/'09 product page on the AreaP site. __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

August 14th, 2009, 01:24 PM	#3
noche_caliente ninjette.org certified postwhore Name: Kim Location: mundo de ensueño Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.	__________________________________________________ Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders

August 17th, 2009, 06:38 PM	#11
M-Oorb ninjette.org sage Name: Matt Location: South East Florida/Rutgers University Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914	Ahh great deal Kerry...hopefully you'll get a good amount of takers __________________________________________________ Pictures of my ninjette plus...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[topix.net] - Charity in Thumb town has rare Harley for sale	Ninjette Newsbot	Motorcycling News	0	December 24th, 2011 12:00 PM
[motorcyclistonline] - More Rare Motorcycles Added to Quail Lodge Sale	Ninjette Newsbot	Motorcycling News	0	July 8th, 2011 06:10 PM
[visordown.com] - Rare superbikes go up for sale	Ninjette Newsbot	Motorcycling News	0	January 20th, 2011 02:00 PM
[nytimes.com] - Rare Brough Superior Motorcycle for Sale at Phillips de Pury	Ninjette Newsbot	Motorcycling News	0	December 21st, 2010 03:40 AM
08 in my area for sale	Tigress	Motorcycle-related	0	December 8th, 2009 05:34 PM

August 14th, 2009, 01:58 PM	#4
kkim Join Date: Nov 2008 Posts: Too much.	lol... he's baaaack! noche... what are you waiting for?

August 14th, 2009, 03:36 PM	#5
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Sounds like a great deal. I know us pregen owners will get a very good deal as well. We are certainly ready for it.

August 14th, 2009, 07:11 PM	#6
adouglas Cat herder Name: Gort Location: A secret lair which, being secret, has an undisclosed location Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot. Blog Entries: 6 MOTM - Jul '18, Nov '16, Aug '14, May '13	Would it be possible to swap the DEI for a break on the Dynojet kit? I'd be interested in the quiet muffler so the DEI would be pointless. Thanks.

August 15th, 2009, 01:42 PM	#8
Imthebriman ninjette.org member Name: Brian Location: Lubbock, Tx Join Date: Aug 2009 Motorcycle(s): 07 Kawi 250R Posts: 31	Im waiting for the special pregen sale!!!!

August 23rd, 2009, 01:59 PM	#14
razorback ninjette.org member Name: Linda Location: Cabot, AR Join Date: Jul 2009 Motorcycle(s): 2009 Ninja 250 Posts: 15	Just got the Area P exhaust on my bike...love, Love, LOVE IT!!! Sounds and looks great..thx Kerry!

August 23rd, 2009, 04:24 PM	#16
razorback ninjette.org member Name: Linda Location: Cabot, AR Join Date: Jul 2009 Motorcycle(s): 2009 Ninja 250 Posts: 15	The bike had been rejetted earlier because I had trouble starting it and it was sluggish and not running right. It ran great after rejetting, but now it needs some adjusting b/c it wants to backfire a little when letting off the throttle with the new exhaust. Otherwise, it runs great, can feel the difference in increase h/p and it sounds REALLY good!!!

August 23rd, 2009, 04:26 PM	#17
kkim Join Date: Nov 2008 Posts: Too much.	backfiring can be fixed by removing the Kleen system.

August 24th, 2009, 08:20 AM	#19
kbryant Area P Name: Kerry Location: SoCal & South Florida Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439	Sale ends tomorrow (August 25th)!

August 24th, 2009, 05:46 PM	#20
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	argh... nothing like putting pressure on us buyers, lol