April 25th, 2009, 08:08 PM | #41 |
ninjette.org newbie
Name: Jordan
Location: Toronto
Join Date: Apr 2009 Motorcycle(s): Ninja 250r Posts: 5
|
yea the plastic part is suppose to take most of the shock and crack and if u need new handle bars i got 2 cause i installed clip ons so if anyone wants i'll sell them for cheap =D they're only 3 days old haha.
|
|
August 5th, 2009, 09:12 PM | #42 |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
I just installed mines. Had a lil bit of trouble lining them up, Part of it is barely touching the fairing what are your thoughts do you think the vibe is going to rub off the paint, i think so.....
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
|
August 6th, 2009, 04:52 PM | #43 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
mine has a nice gouge from where it touched
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
August 6th, 2009, 04:58 PM | #44 |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
yep 7 min ride to work, and the gouge has begin but u cannot see it bc the puck is in it. has yours gotten worse? or will it stay the same?
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
|
August 6th, 2009, 06:15 PM | #45 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
seems to be fairly constant - I can't see it unless the sliders are off - and since I'll need to replace the fairings at some point down the line anyway, it's no biggie I guess
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
August 7th, 2009, 09:02 PM | #46 |
ninjette.org member
Name: Vinh
Location: Maryland
Join Date: Jun 2009 Motorcycle(s): Black 2009 Kawasaki Ninja 250R Posts: 153
|
i had intuitives on mine... had a ranting thread in the tech section
i hated them... they scratched my fairings and took forever to line up on my own.. AND they nearly went into the engine block from a very VERY slow tipover in my own living room (on hardwood floor). even with me holding some weight up as it fell, it bent the rod and the dog ears were completely off afterwards.. i ordered shoguns that same week and put them on this evening. SUPER sturdy, very well built and perfect fit with a few mm clearance on each side from the fairings. very happy with them. only have to trim the left sprocket cover but with a drummel tool its very quick and easy
__________________________________________________
Black 09 Ninja 250R|Shogun Crash Kit|Woodcraft Full Rearsets|Proton Flush LEDs|De-Snorkeled|Shimmed|K&N|Red Rim Tape|ProGrips|Puig|10K HIDs|15T Front |
|
April 17th, 2010, 03:12 PM | #47 |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
Went down into a ditch on ride side of the bike. Took out my blinker and brake petal. Got some very little scratches on the fairings. Slider bent a very little, frame still intack.
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Intuitive Frame Sliders | Yaozer | Motorcycle-related | 16 | September 16th, 2013 01:37 PM |
Intuitive No Cut frame sliders 08+ | Scott1620 | Motorcycle-related | 1 | October 29th, 2010 04:12 PM |
FS: Un-used intuitive frame sliders BEST OFFER | tjb0012 | Motorcycle-related | 8 | May 30th, 2010 08:52 PM |
Intuitive Frame Sliders - Brand New | SpyderGirl | Motorcycle-related | 14 | August 26th, 2009 11:15 AM |
Intuitive Frame Sliders SUCK | Hokie11 | 2008 - 2012 Ninja 250R Tech Talk | 34 | August 12th, 2009 08:21 PM |
|
|