How to Install Danmoto Baffle

Liist · October 25th, 2012, 07:07 PM

I have the carbon exhaust and the baffle, but I have no idea how to put it in. There are no instructions whatsoever, and a Google search didn't pull up anything helpful. Right now the bike is louder than what I'd like it to be.

Master Splinter · April 12th, 2013, 01:31 PM

i installed mine from the opposite end. i took my danmoto carbon exhuast off and were you slip it over the adapter to your headers, you put it in there. the baffle has a slight angle to it. the shaft is not perpendicular to the round base. But the bottom of the exhaust is perpendicular. i hammered it in to the bottom of the exhuast anyways using a flat head and hammer and it seemed to have stuck in place. i put attached the exhuast to the adapter piece and i was done with it. to be honest, it didnt make it that much quitter, it is still load as hell. whatever, im still a ninja master rat.

October 25th, 2012, 07:07 PM	#1
Liist ninjette.org guru Name: David Location: Florida Join Date: Oct 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 357	How to Install Danmoto Baffle I have the carbon exhaust and the baffle, but I have no idea how to put it in. There are no instructions whatsoever, and a Google search didn't pull up anything helpful. Right now the bike is louder than what I'd like it to be.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Danmoto GP can -- baffle drop in	DanielObrien42	2008 - 2012 Ninja 250R Tech Talk	4	March 1st, 2015 02:05 PM
Danmoto to baffle or not to baffle...	DailyRidden250R	2008 - 2012 Ninja 250R Tech Talk	29	November 20th, 2012 01:19 AM
Danmoto Jisu vs Stock vs Baffle	MikeDohz	Videos	2	July 5th, 2012 07:00 AM
FS: DanMoto CF Exhaust complete w/Baffle	red	Motorcycle-related	3	June 18th, 2011 07:18 PM
FS: DanMoto CF Exhaust & Baffle - Brand New!!!	Cloud Strife	Motorcycle-related	5	April 26th, 2011 01:34 PM

April 12th, 2013, 01:31 PM	#2
Master Splinter ninjette.org newbie Name: Jonny Location: portland OR Join Date: Apr 2013 Motorcycle(s): 09' ninja 250r, 09' R6 Posts: 2	i installed mine from the opposite end. i took my danmoto carbon exhuast off and were you slip it over the adapter to your headers, you put it in there. the baffle has a slight angle to it. the shaft is not perpendicular to the round base. But the bottom of the exhaust is perpendicular. i hammered it in to the bottom of the exhuast anyways using a flat head and hammer and it seemed to have stuck in place. i put attached the exhuast to the adapter piece and i was done with it. to be honest, it didnt make it that much quitter, it is still load as hell. whatever, im still a ninja master rat.