cheap rear set adjusters?

massacremasses · February 7th, 2014, 08:53 AM

So I figure Id throw this out there. @alex.s had me make some rearset adjusters for @ally99 and her 300. They came out pretty nice, so I was wondering if anyone would be interested. If there is a market for them I would be down to make a few more. You have to understand these would be out of steel vs. aluminium. they are small enough there isnt a huge weight difference.

Theyd all be powder coated black. Price would be $30-$40ish.

Shank has some pics. when he gets me some more I will post them up. If there is interest Ill make a small trial run of a few sets.

alex.s · February 7th, 2014, 10:57 AM

http://imgur.com/2rv3xw7
http://imgur.com/R71VDXf
http://imgur.com/P3pYnSM
http://imgur.com/zhvduAB
http://imgur.com/uXcOPOj
http://imgur.com/ZMDgyPS

massacremasses · February 7th, 2014, 11:00 AM

SO MUCH INTEREST!!!

Alex would these mount on your 250 too?

alex.s · February 7th, 2014, 11:01 AM

Yes

massacremasses · February 7th, 2014, 11:02 AM

So I guess I should move this to general?

yes @Alex ?

Alex · February 7th, 2014, 11:17 AM

Sure - do you want me to move it to the market area?

tooblekain · February 7th, 2014, 12:27 PM

DAMMIT!!! Where was this post a couple days ago?!? I just bought some Yoshimura riser plates!

EsrTek · February 7th, 2014, 12:45 PM

I'm not sure I'm gettin a 300 yet..but if I do I would need these and can't beat the price!!
Is this gonna be a 1 time thing or is there enough interest to make these available anytime??

alex.s · February 7th, 2014, 01:10 PM

The same part works on ninja 250 or 300

massacremasses · February 7th, 2014, 01:27 PM

Quote:

Originally Posted by Alex

Sure - do you want me to move it to the market area?

I was thinking general right now since Im gauging interest only. I probably wont make them unless I get a few people interested. Id want everyone to see, just so they have the chance. Is that ok? Ill make a FS thread if I decide to sell them.

Quote:

Originally Posted by tooblekain

DAMMIT!!! Where was this post a couple days ago?!? I just bought some Yoshimura riser plates!

haha sorry!

Quote:

Originally Posted by EsrTek

I'm not sure I'm gettin a 300 yet..but if I do I would need these and can't beat the price!!
Is this gonna be a 1 time thing or is there enough interest to make these available anytime??

What I will most likely do is do runs. Like Ill do 5-10 at a time as soon as I have 5-10 people signed up. Its not hard to run them, the thing that Ill want to do at least five sets for is the powder coating. I'm not going to powder coat them one at a time. the oven is too big to do that.

DCMoney · February 7th, 2014, 01:38 PM

I'd buy a set if you would add a larger radius (see below) on both.

massacremasses · February 7th, 2014, 01:46 PM

Quote:

Originally Posted by DCMoney

I'd buy a set if you would add a larger radius (see below) on both.

thats not an issue. I can do that. Ill have to have Alex measure how much clearance I have there. You mean you just want that wider yes?

DCMoney · February 7th, 2014, 01:55 PM

Quote:

Originally Posted by massacremasses

thats not an issue. I can do that. Ill have to have Alex measure how much clearance I have there. You mean you just want that wider yes?

Requesting it to reduce the stress concentrated at that point.

massacremasses · February 7th, 2014, 02:04 PM

got it. not an issue. Easy. Ill whip out a test set monday.

Alex · February 7th, 2014, 03:08 PM

Quote:

Originally Posted by massacremasses

I was thinking general right now since Im gauging interest only. I probably wont make them unless I get a few people interested. Id want everyone to see, just so they have the chance. Is that ok? Ill make a FS thread if I decide to sell them.

No problem.

slickrick · February 7th, 2014, 03:12 PM

If you make these, count me in for a pair.

rasta · February 7th, 2014, 03:14 PM

What's the difference between steel and aluminum? I imagine the steel ones are a little bit heavier, but not enough to really notice anything. Is that it? Also, what foot peg would I use?

I would like one.....

broilmebk · February 7th, 2014, 03:22 PM

^That would be correct. Steel is heavier
Justin, definitely interested in a set of those modified ones

stubshaft · February 7th, 2014, 09:00 PM

Dang it!

I just bought a set of Yoshi adjusters 2 weeks ago...

JohnnyBravo · February 7th, 2014, 09:38 PM

Where can you buy the longer shift linkage?
Interested

how much to powder coat kawi green?

rasta · February 7th, 2014, 10:16 PM

Quote:

Originally Posted by DCMoney

I'd buy a set if you would add a larger radius (see below) on both.

Quote:

Originally Posted by slickrick

If you make these, count me in for a pair.

Quote:

Originally Posted by rasta

I would like one.....

Quote:

Originally Posted by broilmebk

Justin, definitely interested in a set of those modified ones

Quote:

Originally Posted by JohnnyBravo

Interested

how much to powder coat kawi green?

Looks like you got at least 5

Klondike1020 · February 7th, 2014, 10:22 PM

How do these effect leg position ?!
They give you a bit more leg room ?!

So Alex and ally were the trial run ?! Where are the customer testimonials lol

cbinker · February 7th, 2014, 11:11 PM

looks like something Yoshimura makes:
http://stores.sportbiketrackgear.com...l.bok?no=13687 250R
http://stores.sportbiketrackgear.com...l.bok?no=27461 300

shadewalker · February 8th, 2014, 01:16 AM

Quote:

Originally Posted by massacremasses

So I figure Id throw this out there. @alex.s had me make some rearset adjusters for @ally99 and her 300. They came out pretty nice, so I was wondering if anyone would be interested. If there is a market for them I would be down to make a few more. You have to understand these would be out of steel vs. aluminium. they are small enough there isnt a huge weight difference.

Theyd all be powder coated black. Price would be $30-$40ish.

Shank has some pics. when he gets me some more I will post them up. If there is interest Ill make a small trial run of a few sets.

I'm so in.. Ill even pay for shipping to India.. Gimme gimme..

Ducati999 · February 9th, 2014, 05:39 PM

Can you still use the stock shift rod or will it require a longer rod? Also would you be able to move the mount a little (1") higher? My wife has short legs and slightly higher pegs would suit her well.

massacremasses · February 10th, 2014, 09:38 AM

Sounds like I will run a few through...

I can do custom colors but idk how much Ill charge. it may not be worth it. It takes a good .5-1 hour to do color changes. Plus id need to HAVE that color.

and sorry for the late reply. Ive been moving, bought a house, and it and our old house are messes right now... haha So Ive been away from a computer all weekend.

Ill pop some of these out this week. Anyone who wants some a little different, thats probably not an issue and I can most likely do them. It will just take me a little time to alter the CAD file. Or if you have access to CAD draw them up for me and Ill cut em for ya!

Once I have run some, I will post the FS thread in this thread so we dont clutter this one up, and we follow the rules.

Ill leave this thread for suggestions on different ones and such.

Thanks for the interest guys.

broilmebk · February 10th, 2014, 09:43 AM

Quote:

Originally Posted by Ducati999

Can you still use the stock shift rod or will it require a longer rod?

Ahhh, yes. Good question. I totally jumped the gun without thinking of this. I'm wondering this same thing now.

JohnnyBravo · February 10th, 2014, 09:56 AM

Quote:

Originally Posted by broilmebk

Ahhh, yes. Good question. I totally jumped the gun without thinking of this. I'm wondering this same thing now.

The yoshi ones come with a longer shift rod, so I would expect you would have to order one or go pick it up... Won't know for sure till ally or @alex.s chime in

rasta · February 10th, 2014, 09:58 AM

Quote:

Originally Posted by DCMoney

[/URL]

I would also like one like this too....

JohnnyBravo · February 10th, 2014, 10:00 AM

Quote:

Originally Posted by rasta

I would also like one like this too....

Now that it's popped up, I think most folks do, less stress means less chance of failure, I doubt it would be and issue, but an ounce of prevention they say

massacremasses · February 10th, 2014, 10:56 AM

I think you will need an rod extension. If I get a kit going Ill include it. first run my be part DIY if anyones down.

and yes Ill be changing he design to DC moneys suggestion for the rest of the ones I make.

alex.s · February 10th, 2014, 12:15 PM

i have a new drawing for the 300. its a bit different because its slanted. i'll send it to you when im back in cali, justin.

massacremasses · February 10th, 2014, 01:31 PM

Quote:

Originally Posted by alex.s

i have a new drawing for the 300. its a bit different because its slanted. i'll send it to you when im back in cali, justin.

Didnt the one I do go on Allys 300?

alex.s · February 10th, 2014, 03:07 PM

Yes but it can be better by some small changes and still work well for both

massacremasses · February 10th, 2014, 04:24 PM

K cool, Ill wait for your revision. Just put the dimensions on the sketch and Ill change the CAD file.

shadewalker · February 17th, 2014, 05:28 AM

Any updates? :-D

massacremasses · February 17th, 2014, 05:05 PM

Ive been lazy. sorry Ill try and make them this week. Im thinking I may make them slightly DIY. I dont have one to mock up so I dont know exactly where to cut the holes...

alex.s · February 17th, 2014, 06:01 PM

i made it go up more, and it can rotate out a bit because it was too close to the 300 exhaust heat sheild (a few mm) you do need an extra 1" on the shift linkage.

alex.s · February 17th, 2014, 06:05 PM

i emailed you the files, justin

alex.s · February 17th, 2014, 06:14 PM

February 7th, 2014, 08:53 AM	#1
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	cheap rear set adjusters? So I figure Id throw this out there. @alex.s had me make some rearset adjusters for @ally99 and her 300. They came out pretty nice, so I was wondering if anyone would be interested. If there is a market for them I would be down to make a few more. You have to understand these would be out of steel vs. aluminium. they are small enough there isnt a huge weight difference. Theyd all be powder coated black. Price would be $30-$40ish. Shank has some pics. when he gets me some more I will post them up. If there is interest Ill make a small trial run of a few sets. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 7th, 2014, 10:57 AM	#2
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	http://imgur.com/2rv3xw7 http://imgur.com/R71VDXf http://imgur.com/P3pYnSM http://imgur.com/zhvduAB http://imgur.com/uXcOPOj http://imgur.com/ZMDgyPS __________________________________________________

February 7th, 2014, 11:00 AM	#3
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	SO MUCH INTEREST!!! Alex would these mount on your 250 too? __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 7th, 2014, 11:01 AM	#4
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	Yes __________________________________________________

February 7th, 2014, 11:02 AM	#5
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	So I guess I should move this to general? yes @Alex ? __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 7th, 2014, 11:17 AM	#6
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Sure - do you want me to move it to the market area? __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

February 7th, 2014, 12:27 PM	#7
tooblekain ninjette.org sage Name: Matt Location: San Diego, CA Join Date: May 2012 Motorcycle(s): 2007 Triumph Bonneville; 2008 Ninja 250r (trackbike) Posts: 748	DAMMIT!!! Where was this post a couple days ago?!? I just bought some Yoshimura riser plates! __________________________________________________ CVMA #312SoCal TrackdaysBigHeadz RacingMotion ProFactory EffexLeatt Brace* Racetech Bell Woodcraft CFMVortexHotbodiesSurface Sun SystemsBrakingLiveWire EnergyFreegun Underwear

February 7th, 2014, 12:45 PM	#8
EsrTek ninjette.org certified postwhore Name: Eric Location: Murfreesboro, TN Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.	I'm not sure I'm gettin a 300 yet..but if I do I would need these and can't beat the price!! Is this gonna be a 1 time thing or is there enough interest to make these available anytime?? __________________________________________________ My replies are intended for street riding only, plz do not provide track only replies. Visit my new MotoVlog Channel !!

February 7th, 2014, 01:10 PM	#9
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	The same part works on ninja 250 or 300 __________________________________________________

February 7th, 2014, 01:38 PM	#11
DCMoney ninjette.org guru Name: Andrew Location: St Louis Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368	I'd buy a set if you would add a larger radius (see below) on both. __________________________________________________ MCRA.com

February 7th, 2014, 02:04 PM	#14
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	got it. not an issue. Easy. Ill whip out a test set monday. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 7th, 2014, 03:12 PM	#16
slickrick ninjette.org member Name: Rick Location: Boston Join Date: Oct 2013 Motorcycle(s): Ninja 300 Posts: 13	If you make these, count me in for a pair.
	1 out of 1 members found this post helpful.

February 7th, 2014, 03:14 PM	#17
rasta Your face Name: Wes Location: SF Bay Area Join Date: Jul 2013 Motorcycle(s): 2014 Honda CBR650f Posts: A lot.	What's the difference between steel and aluminum? I imagine the steel ones are a little bit heavier, but not enough to really notice anything. Is that it? Also, what foot peg would I use? I would like one..... __________________________________________________ "even a proper fitting helmet can 'get loose'" -csmith
	1 out of 1 members found this post helpful.

February 7th, 2014, 03:22 PM	#18
broilmebk ninjette.org sage Name: Brian Location: Orange County, CA Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762	^That would be correct. Steel is heavier Justin, definitely interested in a set of those modified ones
	1 out of 1 members found this post helpful.

February 7th, 2014, 09:00 PM	#19
stubshaft Rode with the Dinosaurs.. Name: Joe Location: middle of the pacific Join Date: Nov 2013 Motorcycle(s): '08 Ninja 250 Posts: 486	Dang it! I just bought a set of Yoshi adjusters 2 weeks ago... __________________________________________________ *Fortune favors the brave!*

February 7th, 2014, 09:38 PM	#20
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Where can you buy the longer shift linkage? Interested how much to powder coat kawi green?
	1 out of 1 members found this post helpful.

February 7th, 2014, 10:22 PM	#22
Klondike1020 Intrepid Adventurer Name: Josh Location: Rochester/Buffalo NY Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.	How do these effect leg position ?! They give you a bit more leg room ?! So Alex and ally were the trial run ?! Where are the customer testimonials lol __________________________________________________ LIFE IS NOT FOR REGRETS OR EXCUSES. Breath deep, seek peace. Embrace the Madness. Life is good, let it be

February 7th, 2014, 11:11 PM	#23
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	looks like something Yoshimura makes: http://stores.sportbiketrackgear.com...l.bok?no=13687 250R http://stores.sportbiketrackgear.com...l.bok?no=27461 300 __________________________________________________ TEAM ALFALFA www.apexassassins.com

February 9th, 2014, 05:39 PM	#25
Ducati999 ninjette.org certified postwhore Name: Ant Location: Wooster Join Date: Dec 2013 Motorcycle(s): Ducati 999 2012 Ninja 250r Ducati748 Yellow finally running 2003 SV650 S (SOLD) Posts: A lot.	Can you still use the stock shift rod or will it require a longer rod? Also would you be able to move the mount a little (1") higher? My wife has short legs and slightly higher pegs would suit her well.
	1 out of 1 members found this post helpful.

February 10th, 2014, 09:38 AM	#26
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	Sounds like I will run a few through... I can do custom colors but idk how much Ill charge. it may not be worth it. It takes a good .5-1 hour to do color changes. Plus id need to HAVE that color. and sorry for the late reply. Ive been moving, bought a house, and it and our old house are messes right now... haha So Ive been away from a computer all weekend. Ill pop some of these out this week. Anyone who wants some a little different, thats probably not an issue and I can most likely do them. It will just take me a little time to alter the CAD file. Or if you have access to CAD draw them up for me and Ill cut em for ya! Once I have run some, I will post the FS thread in this thread so we dont clutter this one up, and we follow the rules. Ill leave this thread for suggestions on different ones and such. Thanks for the interest guys. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/
	1 out of 1 members found this post helpful.

February 10th, 2014, 10:56 AM	#31
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	I think you will need an rod extension. If I get a kit going Ill include it. first run my be part DIY if anyones down. and yes Ill be changing he design to DC moneys suggestion for the rest of the ones I make. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 10th, 2014, 12:15 PM	#32
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	i have a new drawing for the 300. its a bit different because its slanted. i'll send it to you when im back in cali, justin. __________________________________________________

February 10th, 2014, 03:07 PM	#34
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	Yes but it can be better by some small changes and still work well for both __________________________________________________

February 10th, 2014, 04:24 PM	#35
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	K cool, Ill wait for your revision. Just put the dimensions on the sketch and Ill change the CAD file. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 17th, 2014, 05:28 AM	#36
shadewalker ninjette.org member Name: Archit Location: India Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181	Any updates? :-D

February 17th, 2014, 05:05 PM	#37
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	Ive been lazy. sorry Ill try and make them this week. Im thinking I may make them slightly DIY. I dont have one to mock up so I dont know exactly where to cut the holes... __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 17th, 2014, 06:01 PM	#38
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	i made it go up more, and it can rotate out a bit because it was too close to the 300 exhaust heat sheild (a few mm) you do need an extra 1" on the shift linkage. __________________________________________________

February 17th, 2014, 06:05 PM	#39
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	i emailed you the files, justin __________________________________________________

February 17th, 2014, 06:14 PM	#40
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	__________________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adjusting Throttle Cable - Barrel adjusters and Throttle body adjusters are maxed out	theob	2008 - 2012 Ninja 250R Tech Talk	10	July 19th, 2012 05:01 PM
CHEAP....Rear seat cowl, front cowl, rear sliders, LED MIRRORS	joes280	Motorcycle-related	11	April 27th, 2012 09:42 PM
Cheap ass rear sets	ztrack157	Motorcycle-related	4	October 8th, 2009 01:05 PM
Rear set adjusters...cheap!	Tubesock	2008 - 2012 Ninja 250R Tech Talk	4	May 31st, 2009 08:34 PM