September 25th, 2010, 11:47 AM | #1 |
ninjette.org member
Name: Simon
Location: Linden, NC
Join Date: Feb 2009 Motorcycle(s): 2009 Ninja 250R Posts: 81
|
Lowering Front-end question
So i have a question thats been lingering around in my head ever since i put my woodcraft clip-ons, on...like a year or 2 ago
Normally you would need the 1" lowering blocks to lower the bike, you put them in between the stock handle bars and forks, loosen the triple tree clamp and bam, it slides up an inch, lowering the bike an inch So here is my question..would it be possible to lower the bike, by just loosening the clamp and measuring 1"? since i dont have the stock handlebars anymore i couldn't use the blocks any info is appreciated, thanks
__________________________________________________
Woodcraft~Area P~Zero Gravity~Dynojet~DDM Custom Paint by- ME |
|
September 25th, 2010, 12:04 PM | #2 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
September 26th, 2010, 09:06 AM | #3 |
ninjette.org member
Name: Simon
Location: Linden, NC
Join Date: Feb 2009 Motorcycle(s): 2009 Ninja 250R Posts: 81
|
i dont understand...were u just showing me the link to say yes to my question? lol
i already have the woodcraft clipons on the bike, but seeing as how you did it, i guess i could just loosen the clamp and slide it down and inch Thanks
__________________________________________________
Woodcraft~Area P~Zero Gravity~Dynojet~DDM Custom Paint by- ME |
|
September 26th, 2010, 12:18 PM | #4 |
Join Date: Nov 2008 Posts: Too much.
|
yes, it was to show you the tubes can be slid down easily when you have clip ons. just make sure you don't lower it so much that the front fender crashes into the bottom of the front cowling when the suspension is fully compressed. there is a limit.
|
|
September 27th, 2010, 02:59 PM | #5 |
ninjette.org member
Name: Simon
Location: Linden, NC
Join Date: Feb 2009 Motorcycle(s): 2009 Ninja 250R Posts: 81
|
lol yea i wont do over an inch, i like the way the front looks when its lowered, plus ive heard it makes cornering alot easier as well
thanks for the help!
__________________________________________________
Woodcraft~Area P~Zero Gravity~Dynojet~DDM Custom Paint by- ME |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Lowering the front end. Raising the Forks | zartan | 2008 - 2012 Ninja 250R Tech Talk | 102 | September 10th, 2021 05:55 PM |
RT lowering link question | max427 | 2008 - 2012 Ninja 250R Tech Talk | 7 | April 1st, 2013 06:39 AM |
lowering question | jon.b.calderon | 2008 - 2012 Ninja 250R Tech Talk | 3 | February 24th, 2013 08:08 PM |
lowering the bike question...but i have an EX500 spring | rabies | 1986 - 2007 Ninja 250R Tech Talk | 5 | September 8th, 2012 06:42 PM |
Front end lowering kit for sale?? | stealth250 | 2008 - 2012 Ninja 250R Tech Talk | 6 | June 21st, 2009 07:44 PM |
|
|