|
October 15th, 2023, 07:19 PM
|
#1 |
|
ninjette.org member
Name: Julian
Location: Jombang
Join Date: Sep 2023 Motorcycle(s): Ninja 250R Posts: 14
|
My turn signal indicator not working
Hi there, been trying to fix turn signal indicator on my ‘11 ninja 250R
I test the bulb its fine I Disconnect the meter cable And test continuity on the meter cable. its fine too But it does not outputing 12v only in the turn signal indicator The other meter was working fine I digging arround the wiring and found one of two diode in the back of the front seat was missing Also the bike was using 3in1 tail light/stoplamp and previous owner was messing arround the wiring in the front seat area My question is does this diode was related in the turn signal indicator not working? And btw the turn signal itself was working. Just the indicator itself was not working Thanks 
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Turn signal indicator not working | Julian mustofa | 2008 - 2012 Ninja 250R Tech Talk | 11 | November 24th, 2023 05:32 PM |
| Indicator Problem - Turn Signals Not Working | alex192 | 2008 - 2012 Ninja 250R Tech Talk | 6 | December 7th, 2014 09:56 AM |
| Right front turn signal not working | tanghonglai | 1986 - 2007 Ninja 250R Tech Talk | 5 | February 15th, 2014 01:52 AM |
| turn light indicator stopped working... | DaMan22 | 2008 - 2012 Ninja 250R Farkles | 6 | July 26th, 2012 07:52 PM |
| Turn signal indicator? | crazyjayp | 1986 - 2007 Ninja 250R Tech Talk | 2 | September 11th, 2011 11:49 AM |
|
|
