ninjette.org

Go Back   ninjette.org > General > General Motorcycling Discussion

Reply
 
Thread Tools
Old June 25th, 2009, 11:54 PM   #1
kkim
 
Join Date: Nov 2008

Posts: Too much.
List Your Mods!!!

Simple enough... list what mods you've done to your Ninjette. Big, small... it doesn't matter. I'd like to see who's done what to their bike. If you can, after each mod, put a "+" or "-" to indicate if it's a good mod that you would recommend or a bad mod that people shouldn't bother with.

Use the "ordered list" button to keep the lists neat.

  1. area p quiet core +
  2. bt 090 radials +
etc.

no prices or dollar amounts... don't want this turning into a "whos is bigger" thread.
kkim is offline   Reply With Quote




Old June 26th, 2009, 12:02 AM   #2
kazam58
Sarcasm: Yea that'll work
 
kazam58's Avatar
 
Name: Andy
Location: Essex Jct, VT
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250R

Posts: 330
When I read the title I almost thought this was a compensation thread. Then I read the disclaimer. However, I do believe you'll find most people to have their mods listed in their sig (as I do). But I'll list them anyway. I'm still waiting on a few in the mail and such...
  1. A-Tech CF Fender Elim + (price -)
  2. Zartan's Exhaust Hanger +
  3. Seat Cowl +
  4. Dynojet Kit +
  5. Snorkel Removal +
  6. Drilled Slides +
  7. K&N Drop In Air Filter +
  8. Tech Spec Tank Grips +++++
__________________________________________________
'08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust
kazam58 is offline   Reply With Quote


Old June 26th, 2009, 12:13 AM   #3
Verus Cidere
ninjette.org certified postwhore
 
Verus Cidere's Avatar
 
Name: Michael
Location: Southern NM
Join Date: Feb 2009

Motorcycle(s): '91 Honda CBR600 F2

Posts: A lot.
Well, Andy's right, mine are in my signature, but I'll list them too.
  1. Flush mount front signals +
  2. Turn signals integrated in tail pods + (but make sure it's legal where you are)
  3. Competition Werkes fender eliminator +
  4. Custom Seat Creations seat cover +++++
  5. Blue reflective rim stripe +
  6. LED engine glow light kits + (install difficulty and rediculousness - but great outcome)

Hey Kim, where's yours? I know it's longer than everybody else's, but that's ok. We want to know!
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail.
Verus Cidere is offline   Reply With Quote


Old June 26th, 2009, 03:03 AM   #4
Grn99Kawi
ninjette.org sage
 
Grn99Kawi's Avatar
 
Name: A
Location: Long Island, NY
Join Date: Apr 2009

Motorcycle(s): 2000 Honda CBR600F4 (sold) 1999 Ninja 250 (sold)

Posts: 586
  1. + Asiancycle front flushmounts (body color/amber)
  2. + Zero gravity double bubble screen
  3. + green rim tape
  4. ++ J model (08-09) rear shock
  5. + rear signals integrated into pods
  6. + chrome stock exhaust cans (replaced the black)
  7. ++ Front Pirelli Sport Demon (rear coming soon)
  8. + Removed 95% of the stock decals
__________________________________________________
2000 Honda CBR600F4 Silver and Red

1999 Kawi Racing Green Ninja 250 sold
Grn99Kawi is offline   Reply With Quote


Old June 26th, 2009, 04:31 AM   #5
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Mods:
  1. 15T front sprocket
  2. Shaved tail
  3. Pirelli Sport Demons
  4. Extra brake lights in pods
  5. relocated license plate and rear turn signals further back and up
Snake is offline   Reply With Quote


Old June 26th, 2009, 05:40 AM   #6
HKr1
IC2(SW)
 
HKr1's Avatar
 
Name: Kerry
Location: Pensacola
Join Date: Nov 2008

Motorcycle(s): .

Posts: A lot.
OK, I just wanted to use the button(order list)
  1. Gilles foot pegs
  2. Shimmed Shifter
  3. EX500 clutch perch & Pazzo lever
  4. Pro-Grips
  5. Gutted Muff 1 1/2" baffle
  6. DJ kit
  7. Corbin seat
  8. Puig DB
  9. Pro-Grip clear tank protector
  10. Pazzo brake lever
  11. Cant forget Fender Eliminator mod < should be first on list
  12. Shimmed Sprocket carrier

Other than the rear seat cowl, Pretty much it I think........

Everything gets a +, if it's a worthless mod.... why bother

Last futzed with by HKr1; June 26th, 2009 at 07:46 AM.
HKr1 is offline   Reply With Quote


Old June 26th, 2009, 06:37 AM   #7
Banzai
Psychic war veteran
 
Banzai's Avatar
 
Name: Thomas
Location: Norfolk, VA
Join Date: May 2009

Motorcycle(s): Kawi Green '09 Ninja ZX6R

Posts: 663
  1. Kawi Green '08 Ninja 250 Kawi seat cowl ++
  2. Zero Gravity Dark Smoke double bubble +++
  3. Pro Grip 723 green Gel grips +
  4. Galfer lines F/R +++
  5. EBC HH brake pads +++
  6. Pazzo long clutch/brake levers +++
  7. Ebay carbon fiber tire hugger
  8. Shogun frame sliders ++
  9. Two Brothers bolt on with P1R power tip
  10. DeSnorkeled airbox ++
  11. Needles shimmed +++
  12. TapeWorks reflective rim stripes
  13. Competition Werkes fender eleminator +++
  14. K&N drop in air filter
  15. BT090 110/70 and 140/70 tires ++
  16. Custom made (by me) Skull Key +++++
  17. No cut rear brake light flasher +++++
  18. Targa custom polished heat shield
__________________________________________________
* If you're arguing with some idiot over the internet, chances are pretty good he's doing the same thing!
Zodiac Mindwarp and the Love Reaction

Last futzed with by Banzai; June 27th, 2009 at 03:52 PM.
Banzai is offline   Reply With Quote


Old June 26th, 2009, 06:57 AM   #8
patw
ninjette.org guru
 
patw's Avatar
 
Name: Pat
Location: Barrie, Ontario
Join Date: Jun 2009

Motorcycle(s): 2009 Ninja 250 SE

Posts: 338
  1. Velcro strips for electronic device mounting +
  2. Convex blind spot stick-on mirrors (not installed yet).
I can't help myself... Total cost $7 CDN
__________________________________________________
2013 CRF250L
1985 GL1200 Interstate
patw is offline   Reply With Quote


Old June 26th, 2009, 07:30 AM   #9
Ken
"Is that the Ninjer 1000?
 
Ken's Avatar
 
Name: Ken
Location: SoCal SGV
Join Date: Nov 2008

Motorcycle(s): 2008 Quarter Liter Kawi

Posts: 275
  1. Woodcraft clip-ons (with stock bar-ends) +
  2. CycleControl rearset adjuststers +
  3. solo seat cowl +
  4. Puig dark smoke double bubble screen (seasonal) +
  5. bikemonkey LED integrated taillight +
  6. customdynamics dual LED bar license plate frame +
  7. no-cut brake light modulator +
  8. Intuitive no-cut frame sliders
  9. Intuitive spools
  10. Pro Grip clear tank protector +
  11. eBay matte black rear tire hugger
  12. several blindspot mirrors +
  13. SW-Motech mirror extenders +
  14. FIAMM freeway blaster horn +
__________________________________________________
My Mods
Ken is offline   Reply With Quote


Old June 26th, 2009, 07:37 AM   #10
Tubesock
ninjette.org member
 
Tubesock's Avatar
 
Name: David
Location: Chatta-vegas
Join Date: May 2009

Motorcycle(s): 2009 Kawasaki Ninja 250r

Posts: 69
  1. Custom Fender chop+
  2. DIY flushmounted turn signals+
  3. Cycle control rearset adjusters+
  4. Custom integrated tail light+
__________________________________________________
"When I die I want mud on my jump boots, magazine empty, and barrel hot."
Tubesock is offline   Reply With Quote


Old June 26th, 2009, 07:42 AM   #11
tinng321
ninjette.org sage
 
tinng321's Avatar
 
Name: Tin
Location: NJ
Join Date: Apr 2009

Motorcycle(s): 08 black 250r (sold); '09 black zx6r

Posts: 903
  1. fender chop
  2. seat cowl (damage)
  3. rim tape on rear wheel (waiting for more to arrive for the front wheel)
tinng321 is offline   Reply With Quote


Old June 26th, 2009, 08:02 AM   #12
Obsidian
ninjette.org member
 
Name: Brandon
Location: Mobile, AL
Join Date: Jun 2009

Motorcycle(s): 05 Ninja EX250R

Posts: 156
Here is mine. I had to "Go advanced" to find it though.
  1. Asian Cycles flush mount c/f clear turn signals
  2. Rear fender delete with custom tag bracket
  3. Integrated turn signal lights into rear brake assembly
  4. C/F tank protector
  5. Decals removed
  6. JT 15 tooth front sprocket
  7. SV650 rear shock
  8. In-line fuel filter added and removed old stock one
  9. ZG Double Bubble dark smoke windshield
  10. Custom tribal sanding marks.
  11. Painted mufflers high temp black because of rust.
__________________________________________________
Obsidian is offline   Reply With Quote


Old June 26th, 2009, 08:09 AM   #13
TrueFaith
ninjette.org sage
 
TrueFaith's Avatar
 
Name: Wayne
Location: Brookfield, MA
Join Date: Nov 2008

Motorcycle(s): 2011 Honda CBR250R

Posts: 585
  1. Full AREA - P exhaust with all burrs ground and polished +
  2. Airbox removed and replaced with air pod filters +
  3. Intake and ehaust ports polished +
  4. Carb horns polished +
  5. Carb slides extra hole drilled +
  6. 3 washers under carb needles +
  7. Synched carbs +
  8. 108 main jets +
  9. Kawasaki clean air system removed and plugged +
  10. Gas tank noise elimination mod +
  11. 15/41 gear ratio sprocket +
  12. Polished rims and heel guards +
  13. Stock silver decals replaced w/red +
  14. Targa Fender Eliminator kit +
  15. Puig windscreen +
  16. Corbin leather saddle +
  17. Solo seat cowl pad covered w/red vinyl from Custom Seat Creations +
  18. Rim stripes +
  19. Zartan's muffler hanger +
  20. Targa red anodized muffler heat shield -*
(* removed - poor attachment system & detracted from the look of the Area - P)

The first 12 mods were performed by original owner ScootyScootScot, who is now piloting a new CBR1000RR.
TrueFaith is offline   Reply With Quote


Old June 26th, 2009, 08:14 AM   #14
Broom
Track Junkie
 
Broom's Avatar
 
Name: Jon
Location: Dallas
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r Track Bike, DR350 commuter, KDX220 woods bike

Posts: 602
i'm afraid if i start listing it all out i'll realize how much we've spent
  1. hotbodies race platics
  2. custom paint
  3. full yosh exhaust
  4. professional dyno tune
  5. new springs and fork internals
  6. penske triple clicker shock
  7. woodcraft clipons
  8. woodcraft rearsets
  9. full range of sprokets
  10. high quality chain
  11. gopro camera (bike upgrade?)
  12. shogun frame sliders, bar ends, spools
  13. bridgestone tires
  14. steal braided front brake lines
  15. EBC pads
  16. full safety wire
  17. removed kick stand mount

i think thats the bulk of it....
__________________________________________________
Las Escobas -- Track Bikes Save Lives
JonBroom.com
Broom is offline   Reply With Quote


Old June 26th, 2009, 08:47 AM   #15
2WheelGuy
ninjette.org certified postwhore
 
2WheelGuy's Avatar
 
Name: Craig
Location: Silicon Valley, CA USA
Join Date: May 2009

Motorcycle(s): '98 EX250, '02 EX250, '08 250r, '03 SV650, '98 GSXR750 '03 Hayabusa, '87 YSR50, '84 ZX900, +MORE

Posts: A lot.
Mods to my favorite 250 a yellow 2002 (I give them all a +):

Suspension:
  1. Forks by Aftershocks with modified damper rods, springs, Racetech Gold Valve Emulators and 7.5wt oil
  2. Fork Brace - make unknown
  3. Fox Shock
  4. Shortened Dogbones
  5. Kosman modified wheels 3.25-17" front 4.50-17" rear
  6. Tires Pirelli Diablo Supercorsa SC 110-17 front 150-17 rear

Engine:
  1. K&N Air Filter pods
  2. Keihin CR Special round slide carburetors
  3. G-Force ported head
  4. Degreed cams
  5. Counter-balancer removed
  6. Muzzy exhaust
  7. Rotella T synthetic oil

Brakes/Drive:
  1. EBC HH brake pads
  2. 428 chain & sprocket conversion

Misc:
  1. Airtech Race Bodywork
  2. Racing belly pan
  3. Raised front fender
  4. Late model small battery
  5. Fully safety wired

__________________________________________________
CraigHarris.org Pacific Track Time CraigsWeb
See you at 2014 MotoGP Laguna Seca! We'll be camping on Fox Hill.
AFM #278
2WheelGuy is offline   Reply With Quote


Old June 26th, 2009, 09:13 AM   #16
M-Oorb
ninjette.org sage
 
M-Oorb's Avatar
 
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008

Motorcycle(s): 2008 250r (Fastest Color)

Posts: 914
Hmm do I really wanna go after 2 track rats? eh whatever haha
  1. Comptetion Werks Fender eliminator +
  2. 15t front sprocket +
  3. Polished wheel lip (looks +, upkeep -)
  4. Snorkel removal
  5. Shimmed carb needles +
  6. Solo seat cowl +
  7. Custom seat creation cover (Just got in today but looks great)
  8. Clear front turn signals +
  9. 15 in Area P carbon fiber full exhaust with 2 piece flat tip +++
  10. Integrated clear LED tail light (Incoming )
  11. Zartan Exhaust Hanger +
  12. Zero G Dark Smoke Double Bubble +
  13. Rotella T synthetic +

Oh yea and the factory Kawisaki OEM power mod...

Last futzed with by M-Oorb; June 26th, 2009 at 04:02 PM.
M-Oorb is offline   Reply With Quote


Old June 26th, 2009, 09:19 AM   #17
CANTFUNCTION
ninjette.org member
 
CANTFUNCTION's Avatar
 
Name: Chris
Location: Georgia
Join Date: May 2009

Motorcycle(s): 09 ninja 250(red)

Posts: 193
  1. Targa fender eliminator kit +
  2. Kawi seat cowl +
  3. Ebay front pegs +
  4. ZG Double Bubble dark smoke windshield - (Should have gotten light smoke)
  5. Area P Standard Stainless Steel ++
  6. Factory Pro jet kit CRB-K04-1.0 ++
  7. K&N drop in air filter ++
  8. Snorkel Removal ++
  9. SW-Motech mirror extenders +++

Things that are in the mail
  1. Corbin seat
  2. Cycle control rearset adjusters
CANTFUNCTION is offline   Reply With Quote


Old June 26th, 2009, 09:21 AM   #18
noche_caliente
ninjette.org certified postwhore
 
noche_caliente's Avatar
 
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008

Motorcycle(s): '08 250

Posts: A lot.
Most of mine are in my sig, but the character limit keeps me from listing all of them, so here they are.... I hope to add the Area P to the list VERY soon!
  1. ProGrip tank pad
  2. Reflective blue rim tape
  3. 2 Washers under carb needles
  4. Pazzo Levers in Blue
  5. no-cut brake light modulator
  6. Roaring Toyz front and rear lowering kit
  7. Matrix II LED brake light
  8. Puig Double Bubble Windscreen in Dark Smoke
  9. Cortech Sport Tail and Saddlebags
  10. Cortech Super Mini Tank bag
  11. Intuitive Frame Sliders
  12. OES Swing Arm Slider Spools
  13. Removed snorkel
  14. K&N Oil filter
  15. HIDs
  16. LED turn signals on the mirrors
  17. Auxillary LED brake light on license plate frame
  18. LED running lights/license plate light bolts
  19. garage door opener wired to high beam
  20. Cheap watch mounted to brake reservoir
  21. CORBIN SEAT ON THE WAY!
coming mods
  1. AreaP CF 18" Quiet Core
  2. Proton Flush Mounts
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders

Last futzed with by noche_caliente; July 3rd, 2009 at 07:05 AM.
noche_caliente is offline   Reply With Quote


Old June 26th, 2009, 11:00 AM   #19
paterick4o8
ninjette.org sage
 
paterick4o8's Avatar
 
Name: patricK
Location: San Jose, CA--BAY AREA!
Join Date: Mar 2009

Motorcycle(s): '08 blue 250R [sold]. '09 lime ZX-6R [stolen :( ]. '06 blue 636.

Posts: 918
I can gladly say that all my mods are a + (otherwise I would have undone them)
Not all my mods can fit in my sig so here they are:
  1. FMF Apex Carbon Fiber Slip-on
  2. Targa heat shield
  3. Shimmed needles
  4. Removed snorkel
  5. 8000K HIDs
  6. Lamin-X Headlight film
  7. DIY fender cut
  8. LED License Plate lights
  9. Shogun crash kit
  10. Bohemian Racing rearsets
  11. Motrax Dinkywinkaz turn signals
  12. Hotbodies GP windscreen, Light Smoke
  13. TechSpec Grips
  14. Black reflective rim tape
  15. Black reflective Ninja decals
  16. Black Galfer SS lines
  17. Rotella T Synthetic Oil
  18. K&N oil filter
  19. K&N air filter
  20. Woodcraft Clip-ons
  21. '08 Black Seat cowl
  22. '09 Black Front Fender
  23. Bridgestone BT016 Front & Rear
  24. Removed all stock round reflectors

Last futzed with by paterick4o8; June 26th, 2009 at 01:24 PM.
paterick4o8 is offline   Reply With Quote


Old June 26th, 2009, 01:26 PM   #20
CC Cowboy
ninjette.org certified postwhore
 
CC Cowboy's Avatar
 
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009

Motorcycle(s): I pass the wind!

Posts: A lot.
MOTM - Mar '13, Jun '14
Oil change
gas
__________________________________________________
If everything seems under control; you're just not going fast enough!
CC Cowboy is offline   Reply With Quote


Old June 26th, 2009, 02:49 PM   #21
kazam58
Sarcasm: Yea that'll work
 
kazam58's Avatar
 
Name: Andy
Location: Essex Jct, VT
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250R

Posts: 330
Quote:
Originally Posted by CC Cowboy View Post
Oil change
gas
Which kind? After all, we never know with you...
__________________________________________________
'08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust
kazam58 is offline   Reply With Quote


Old June 26th, 2009, 03:10 PM   #22
gitoy
ninjette.org guru
 
Name: gitoy
Location: rpv, ca
Join Date: May 2009

Motorcycle(s): 04 ninja 250, 05 zzr 600 (sold), 07 cbr600rr

Posts: 319
duct tape mount.....$0.15....

gitoy is offline   Reply With Quote


Old June 26th, 2009, 03:12 PM   #23
Apex
Livin' the Minimoto Life
 
Apex's Avatar
 
Name: Mark
Location: Riding around in TX
Join Date: Mar 2009

Motorcycle(s): 2022 Honda Navi, 2018 Z-125 Pro

Posts: A lot.
  1. A set of Sport Demons (which work great!)
  2. Yoshimura RS3 Exhaust
  3. Integrated signals
  4. Fender Eliminator
__________________________________________________
--- My IG Page --- My FB page! ---

2022 Honda Navi && 2018 Z-125 Pro
Apex is offline   Reply With Quote


Old June 26th, 2009, 03:56 PM   #24
addy126
ninjette.org certified postwhore
 
Name: addy126
Location: Tx
Join Date: May 2009

Motorcycle(s): '09 Kawasaki N-250 + '09 Vulcan 900 Classic Lt

Posts: A lot.
List of current, holding for more.....
  1. Coimagination Headlight Modulator
  2. Backoff Tail Modulator (spliced)
  3. Rubber Ronnie Tank Pad
  4. Pirelli Sport Demons (Frt/Rear)
  5. Gorilla Alarm System
  6. Joe Rocket Manta Tank Bag
  7. Cycle Guys Fast Pack (Pillion attachment)
  8. Black Matte Rear Tire Hugger and Red Rim Stripes
  9. Formotion Luminous/Waterproof Clock
  10. Cycle Gear 1" wide angle stickon mirrors
  11. Ryder Clips Shift Sock
  12. On Guard Disc Lock
addy126 is offline   Reply With Quote


Old June 26th, 2009, 04:40 PM   #25
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
  1. Airtech streamline body
  2. Bubble shield Puig
  3. Full Yoshi for the street Nojima GP exhaust for race
  4. K&N air filter pods
  5. Re jet carbs plus other stuff
  6. different plugs
  7. Woodcraft clip on bars
  8. Buel Xb foot pegs
  9. Koso RX2 dash
  10. A selection of gears
  11. S.S. brake lines Galfer
  12. Lower front and rear with lowering links.
  13. metal chain guard
  14. hugger
  15. kill switch
  16. Safety wire everything
  17. Ignition mods
    18 Cut down gas tank
    19 ZX14 mirrors
    20 remove rear fender relocate tag.
    21 Battery tender plug and wire for heated vest and gloves
    22 swing arm spools
    23 rear set cowl

Soon to come:
  1. Adjustable cam sprockets
  2. another ignition system
  3. Carbs of some sort.
  4. another engine
  5. ceramic bearings
  6. non O ring chain.

Last futzed with by Racer x; June 27th, 2009 at 02:25 AM.
Racer x is offline   Reply With Quote


Old June 26th, 2009, 06:07 PM   #26
komohana
ninjette.org certified postwhore
 
komohana's Avatar
 
Name: Steve
Location: Kekaha, Kauai HI
Join Date: Jan 2009

Motorcycle(s): 05 GSX-R 600 2003 EX250: Woodcraft Bars, Levers, Mirrors, Shim'd Mixture, Synthetic, '08 Rear Shock

Posts: A lot.
(*) -- mods done prior to ownership
  1. carbon fiber clutch/brake levers*
  2. sport mirrors
  3. woodcraft clip-on's
  4. flush mounted fwd. turn signals*
  5. tail eliminator/rear turn signal intergration*
  6. red to amber rear turn signal lense swap
  7. shimmed mixture screws
  8. reversed (gp style) shifting (converted back to stock pattern)
  9. sport demons front and rear
__________________________________________________

Remember when sex was safe
and motorcycles were dangerous?

Last futzed with by komohana; June 26th, 2009 at 06:09 PM. Reason: forgot to add tires
komohana is offline   Reply With Quote


Old June 26th, 2009, 06:15 PM   #27
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE

Posts: Too much.
Blog Entries: 7
Annie's bike is completely stock, for the most part...
  1. Garmin 60Cx GPS RAM mounted/hooked to bike power
  2. Wired for Gerbing heated clothing / battery tender lead
  3. Rear brake-light modulator
  4. Sport Demons
  5. Sliced off rear fender (to clear the rear-stand)
  6. Seat cowl
  7. Pit Bull spools
  8. Digital clock / thermometer mounted on dash
  9. Oxford mini sport tankbag
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Old June 27th, 2009, 09:47 AM   #28
ninjabrewer
dirty old man
 
ninjabrewer's Avatar
 
Name: Chris
Location: Hazel Green, AL
Join Date: Nov 2008

Motorcycle(s): Blue '08 Ninja 250

Posts: A lot.
Blog Entries: 1
Joe Rocket jacked, Scorpion pants, gloves helmet.

oh you mean to the bike
  1. Double bubble windscreen, (previous owner)
  2. 2 washers on the needles, (me)
gas and oil

Mods for the bike are little far down my list, want to get more gear for me, tools for work, put daughter through school, etc.

nb
__________________________________________________
Death tugs at my ear and says, "Live, I am coming." -Oliver Wendell Holmes, Sr., poet, novelist, essayist, and physician (1809-1894)
www.friendsofsanonofre.org
ninjabrewer is offline   Reply With Quote


Old June 27th, 2009, 09:47 PM   #29
Nemy
ninjette.org sage
 
Nemy's Avatar
 
Name: Tim
Location: Portland, OR
Join Date: Dec 2008

Motorcycle(s): 2009 SE Ninja 250R

Posts: 796
  1. Shock Racing LED rear turn signals
  2. DIY Flushmount front turn signals
  3. DIY Fender Cut
  4. Shimmed carbs - 1 washer
  5. Leovince Slipon Exhaust
  6. Progrip Tankpad
  7. Progrip Handlebar Grips
  8. Talon Motorcycle Alarm
  9. Weatherproof Power Outlet
  10. Puig DB Windscreen

All a + otherwise it wouldn't still be on the bike.

Last futzed with by Nemy; June 30th, 2009 at 10:53 PM.
Nemy is offline   Reply With Quote


Old June 30th, 2009, 10:31 AM   #30
SpyderGirl
3 for street, 2 for dirt
 
SpyderGirl's Avatar
 
Name: Katlyn
Location: San Francisco Bay Area (California)
Join Date: Mar 2009

Motorcycle(s): 2008 Can Am Spyder PE #1344 / 2009 Kawi KLX140L Monster Energy / 2009 Kawi Ninja 250R (RIP 8.23.09)

Posts: 586
Okay, here is mine for the Ninja:
  1. Blue Reflective Rim Tape
  2. Black/Blue Custom Seat Creations seat cover
  3. Two Brothers CF exhaust
  4. Fender eliminator kit
  5. Smoked flushmount front signals
  6. Trojan LED signal mirrors
  7. Halogen foglights
  8. 2" lowering link
  9. Roaring Toyz lowered kickstand
  10. Blue ZG touring windscreen
  11. Black/Blue grips
  12. Black/Blue Mantis tankbag
  13. Black/Blue rubber tank protector
  14. Mono seat cowl
  15. Rear brake modulator
  16. White LED license plate bolt lights
  17. Personalized license plate ("2WSTEEZ")
  18. Black rear swingarm spools

And the Spyder if you're interested:
  1. Corbin Dual Heated Seats with backrest
  2. Corbin trailer hitch
  3. Corbin Saddlebags
  4. F1 Windshields EVOIII clear windscreen
  5. Foglights
  6. Side panel trim kit
  7. Six spoke premium wheels
  8. Hindle exhaust
  9. Caliper trim kit
  10. (1) Powerlet dash mounted outlet
  11. Power tankbag kit
  12. Can Am tankbag
  13. (3) 12v Cigar outlets - (2) dash mounted, (1) in trunk
  14. Spyder trunk liner
  15. RAM Garmin mount on clutch resevoir
  16. RAM iPod mount on console
  17. RAM digital camera mount on windscreen
  18. Garmin Nuvi 760
  19. UNiQ Cycle Sounds 150w Amplified Speaker System
  20. Custom tri-tone paint job
  21. Personalized Plate ("3 SPY 3")
  22. LED third brake light
  23. Progrip console protector
  24. Piggybacker trailer
  25. Throttlemeister

WOW, my list for the Ninja is almost as long as the one for the Spyder and I've only had the Ninja 3 months. I have a modding disease. Is there a Modders Anonymous group I can join?????
__________________________________________________
Feel free to look me up on facebook.
SpyderGirl is offline   Reply With Quote


Old June 30th, 2009, 12:22 PM   #31
M-Oorb
ninjette.org sage
 
M-Oorb's Avatar
 
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008

Motorcycle(s): 2008 250r (Fastest Color)

Posts: 914
Wow your spider sounds awesome
Posted via Mobile Device
M-Oorb is offline   Reply With Quote


Old June 30th, 2009, 12:25 PM   #32
SpyderGirl
3 for street, 2 for dirt
 
SpyderGirl's Avatar
 
Name: Katlyn
Location: San Francisco Bay Area (California)
Join Date: Mar 2009

Motorcycle(s): 2008 Can Am Spyder PE #1344 / 2009 Kawi KLX140L Monster Energy / 2009 Kawi Ninja 250R (RIP 8.23.09)

Posts: 586
Quote:
Originally Posted by M-Oorb View Post
Wow your spider sounds awesome
Thank you, I love it too.
__________________________________________________
Feel free to look me up on facebook.
SpyderGirl is offline   Reply With Quote


Old June 30th, 2009, 03:15 PM   #33
kkim
 
Join Date: Nov 2008

Posts: Too much.
Quote:
Originally Posted by SpyderGirl View Post
I have a modding disease. Is there a Modders Anonymous group I can join?????
If you're a member of ninjette, you are already a member of Modders Anonymous.
kkim is offline   Reply With Quote


Old June 30th, 2009, 04:00 PM   #34
tc3jg
ninjette.org member
 
Name: Justin
Location: illinois
Join Date: May 2009

Motorcycle(s): 08 ninja 250r

Posts: 158
Here are my mods SO FAR I swear I keep telling myself to stop spending money on such an inexpensive bike but I cant help it.
  1. Very clean fender chop (at home chop) +
  2. custom lexan sheet for license plate lights (cleans up the tail really nice) +
  3. Windshield sprayer lights (for license plate) +
  4. Custom paint (+)
  5. Custom carbon fiber wrapped panels (+)
  6. LED strip turn signal lights for the rear (+)
  7. Shims for the needles
  8. reflective rim tape (+)
  9. Painted rotors (+)
  10. Painted Windscreen
  11. Million color LED tubes and controller (+)
  12. Private Label MFG Full exhaust for ninja 250r ( its in the mail will update this weekend when I get it or mon at the latest)
tc3jg is offline   Reply With Quote


Old July 2nd, 2009, 06:14 PM   #35
Sailariel
ninjette.org certified postwhore
 
Sailariel's Avatar
 
Name: Alex
Location: Belfast, ME
Join Date: Jul 2008

Motorcycle(s): 2010 Honda NT-700-V, formerly, Green 2008 Ninja 250R

Posts: A lot.
  1. Mild fender chop
  2. Targa Tank Pad
  3. Fog Lights
  4. Xenon H-7 Lights
  5. LED Tail/Brake Light
  6. ZG Touring Windshield
  7. Tank Bag, Tail Bag and Saddle Bags from VIP Auto
  8. Changed to Synthetic Oil (Rotella 5W40 at 4000mi.)
  9. Custom Graphics.
  10. Mirrors from a ZX10R with blind spot mirrors added.
Sailariel is offline   Reply With Quote


Old July 2nd, 2009, 10:49 PM   #36
nmd003
ninjette.org member
 
nmd003's Avatar
 
Name: Nick
Location: Maryland
Join Date: Apr 2009

Motorcycle(s): 2004 Ninja 250R

Posts: 79
  1. Muzzy full exhaust +
  2. Jetted +*
*Bought from dealership, exhaust was done by previous owner, and salesman told me that it's jetted, but who knows.*

Quote:
Originally Posted by gitoy View Post
duct tape mount.....$0.15....

Hm looks exactly like mine, except for your duct tape tripod mount. Where did you get that clock at? I need one really bad. That would be perfect for mine.

Also, while we're at it, can someone recommend a good cheap tank bag that I can put my hapkido uniform in? Thanks.

[/threadjack]
nmd003 is offline   Reply With Quote


Old August 27th, 2009, 07:34 PM   #37
Ken
"Is that the Ninjer 1000?
 
Ken's Avatar
 
Name: Ken
Location: SoCal SGV
Join Date: Nov 2008

Motorcycle(s): 2008 Quarter Liter Kawi

Posts: 275
Quote:
Originally Posted by Ken View Post
  1. Woodcraft clip-ons (with stock bar-ends) +
  2. CycleControl rearset adjuststers +
  3. solo seat cowl +
  4. Puig dark smoke double bubble screen (seasonal- it's on) +
  5. bikemonkey LED integrated taillight +
  6. customdynamics dual LED bar license plate frame +
  7. no-cut brake light modulator +
  8. Intuitive no-cut frame sliders
  9. Intuitive spools
  10. Pro Grip clear tank protector +
  11. eBay/Scott's matte black rear tire hugger
  12. several blindspot mirrors +
  13. SW-Motech mirror extenders +
  14. FIAMM freeway blaster horn +
  15. Bridgestone BT-016 110/70 F 150/60 R tires +
  16. BELL 12V Outdoor power outlet +
  17. two RAM 1" ball mounts +

    Sitting in my room: Spiegler front and rear stainless steel brake lines
__________________________________________________
My Mods

Last futzed with by Ken; October 6th, 2009 at 04:10 PM.
Ken is offline   Reply With Quote


Old August 27th, 2009, 07:59 PM   #38
andrewexd
ninjette.org guru
 
andrewexd's Avatar
 
Name: Andrew
Location: LA
Join Date: Aug 2009

Motorcycle(s): 07 GSXR600 (N250 sold :( )

Posts: 415
  1. Two brothers exhaust
  2. fender eliminator
  3. fin
andrewexd is offline   Reply With Quote


Old August 28th, 2009, 12:44 AM   #39
UTIED
ninjette.org newbie
 
Name: RICH
Location: AZ
Join Date: Jul 2009

Motorcycle(s): 08 NINJA 250

Posts: 5
  1. 2008 Kawi Green +++++++++++++++
  2. rear seat cowl ++
  3. Federectomy +++
  4. tag light bolt +
  5. 15 Front sprocket +++
  6. 42 Rear sprocket +++
  7. shimmed needles .025 ++++
  8. removed snorkel +++
  9. Sportisi VR6 Full exhaust ++++++++
UTIED is offline   Reply With Quote


Old August 28th, 2009, 02:05 AM   #40
Xorro
ninjette.org member
 
Xorro's Avatar
 
Name: Zoe
Location: UK
Join Date: Aug 2009

Motorcycle(s): CBR650F replacing the Ninja 300

Posts: 122
  1. Kawa Seat Cowl +
  2. MRA / Kawa UK Double Bubble +

I'm not going to do a lot of mods... I got a bit carried away when I had my Honda Hornet
__________________________________________________
Current: Honda CBR650F - Pearl Metalloid White
Previous: Kawasaki Ninja 300Ninja 250RKawasaki ER5Honda Hornet CB600
Xorro is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
List of mods so far shadewalker 2013 - 2017 Ninja 300 Tech Talk 177 October 3rd, 2014 02:29 AM
Mods heyzeus 1986 - 2007 Ninja 250R Tech Talk 5 June 17th, 2014 08:18 PM
Yes or no on these mods? Kerberos General Motorcycling Discussion 19 December 13th, 2011 10:33 AM
List of Mods TheJimmyEnglish 2008 - 2012 Ninja 250R Farkles 63 October 16th, 2011 08:55 AM
My mods and what i got for my $$ eddiekay General Motorcycling Discussion 2 August 9th, 2011 09:27 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 08:46 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.