Special exhaust deal - Page 4

HA-Y-N NINJA · July 10th, 2009, 08:05 AM

Put the HA-Y-N Ninja done for VR ALL BLACK if possible. I also would like DYNO Jet Kit STAGE 2 and the air filter if you can get it. Let me know what cost will be and if you can get it all.

Much Mahalo's

ztrack157 · July 10th, 2009, 10:01 AM

Airfilter I can get. Jet Kit's I don't even screw with since you can get them everywhere. I may add those to the accessories section at a later date.

ztrack157 · July 10th, 2009, 10:03 AM

1. Ohh Snap VR Black+ bag of skittles
2. Rookie V6R quiet
3. Duvi VR Black
4. Chamus57 V6R Quiet
5. xTKx V6R
6. blubyu V6R
7. HA-Y-N Ninja VR Black
8.
9.
10.

ztrack157 · July 10th, 2009, 10:07 AM

Andrew http://www.factorypro.com/ I think you can only buy direct for the 250R kit.

divingtigger · July 10th, 2009, 10:15 AM

DO we need to get a jet kit for these systems to work?? or will it work with bone stock?

ztrack157 · July 10th, 2009, 10:54 AM

Bone stock is never recommended. Shimming the needles may get you by but installing a jet kit is highly recommended.

Nickds7 · July 10th, 2009, 06:01 PM

How much to include a monster energy tank cover? I'm in after I see db ratings

ztrack157 · July 10th, 2009, 06:03 PM

The Tank covers are $65

ztrack157 · July 10th, 2009, 08:52 PM

Video of the VR black will be on Monday hopefully. Db rating when I pick up a db meter.

Captain Insaneo · July 11th, 2009, 09:01 AM

So how much shipped for the full VR system, polished though, don't really like the black all that much.

HA-Y-N NINJA · July 11th, 2009, 10:14 AM

Please put me down for an air filter and cleaning kit as well!! Let me get this straight, we should get the exhaust the ending of aug?

Mahalo

ztrack157 · July 11th, 2009, 11:40 AM

THe GB Ends the first week of August. I will place the order the following week. From there Ocean Freight takes a month to get to me. Unless you guys want them sooner but if thats the case the $260 price is not possible. Sometime in September is the realistic timeframe for you to receive it. And I only offer this to those who are willing to wait a little while and save $75.

Captain insaneo it is still the same price. And cholby I have an extra filter in the first shipment if you want it.

HA-Y-N NINJA · July 11th, 2009, 06:41 PM

ok. how much is the filter? I miss the GB on the Tire Hugger, how much are those? i am thinking of a blue one. i am thinking of doing up my bike all at once

ztrack157 · July 11th, 2009, 06:54 PM

Filters are $45 shipped. Huggers are $170 shipped. I have a few CPB huggers left in this shipment coming in about a month.

ztrack157 · July 13th, 2009, 10:38 AM

Ok so I got a new VR exhaust in today for my bike. The header is a new design so it isn't really a finished product just yet but I like it.

Link to original page on YouTube.

andrewwoo · July 13th, 2009, 08:41 PM

ooo man! that means im going to get my exhaust soon? can i get stickers with that?

ztrack157 · July 13th, 2009, 08:56 PM

Your's should be here in less than a month Andrew. I paid to have this one shipped to me and it wasn't Cheap. Me, Mike Sema, and Kazam are the only people who will have this style. The New VR black can is Aluminum for a smoother finish. Ours are hand pounded and formed. The new headers also are not smooth mandrel bends but a series of welds (does not effect power dyno sheets back it up and it was vigorously tested). I actually prefer this look while some probably do not even though you'll never see it. Then everything is smoothed out and polished. Man my video sucks to because this thing is loud. Almost two bros loud but not quite.

kazam58 · July 14th, 2009, 07:44 AM

Very nice. I can't wait, especially after that vid. Not to mention that it sounds fricken awesome. From what I've been able to distinguish from all the vids of different exhausts, this one sounds the best, loud or not.

I also wanted to ask, out of curiosity more than anything, how did you make yours black? Did you have it coated somehow, or do you still have that paint on it that you said you were having problems with?

ironglory · July 14th, 2009, 08:29 AM

Do you have to rejet w/ this upgrade?

Captain Insaneo · July 14th, 2009, 08:42 AM

Is there any way to get this exhaust before september?

I know this is a special deal, so i was just wondering like if we pay retail price can we have it sooner?

ztrack157 · July 14th, 2009, 01:10 PM

If your willing to pay full retail I can get it for you. It will take 12 days from order to delivery. It will suck on my end because I won't make anything since I will be eating the shipping. But it will still be about $70 cheaper than if you buy direct from bram. If 3 or more buy at once I will order not and no waiting at all is required. I will Drop the price to $315 if you guys would like to do it that way. I do recommended waiting about a week though because the newer and updated models will be available then.

JEt kit is recommended.

Andy Mine was powdercoated with standard flat black. The can doesn't get hot enough to effect it but it was hot eough that the paint couldn't handle it.

Captain Insaneo · July 14th, 2009, 01:50 PM

Okay so for $315, i can have the exhaust within the next 2-3 weeks...?

The VR race exhaus that is, the same one that's on your bike.

ztrack157 · July 14th, 2009, 01:52 PM

Same as on my bike yes. Just with the newer can not the hand pounded one.

Captain Insaneo · July 14th, 2009, 01:54 PM

Quote:

Originally Posted by ztrack157

Same as on my bike yes. Just with the newer can not the hand pounded one.

Awesome, when shall I order this exhaust to ensure I get the newer one.

And where do i order it from, through you?

HA-Y-N NINJA · July 14th, 2009, 06:58 PM

so let me get this straight, if i pay $315 i get the NEW VR all black(tip is black too not polished?)all smooth exhaust in 12 days from the time of ordering?

ztrack157 · July 14th, 2009, 07:06 PM

If you and Captain Insaneo both buy then yes. But Like I said give me about a week to get things squared away. Part of the GB thing was I was waiting on the newer models. I will see about an all black one for you and an all polished for Captain but I can't make promises that you'll get what you want in that dept since that is custom stuff. But I will Check.

ztrack157 · July 14th, 2009, 07:51 PM

Heres a video of the VR without the Supressor. This is not recommended because performance won't be as good. But hey its our exhaust.

Link to original page on YouTube.

Nickds7 · July 14th, 2009, 11:22 PM

Sounds like open pipe :P

istreefitty · July 15th, 2009, 12:19 AM

OKOKOKOK Im down for GB but is it the pictures on the last thread or is it this one

exhaust

because i like the shorty fatty look better (kinda like the HR1 but waaayyyyy better sounding)

ztrack157 · July 15th, 2009, 08:17 AM

Both cans seen at sportisimoto-usa.com are in the GB.

istreefitty · July 15th, 2009, 09:27 AM

put me down for the GB when do you need the deposite??

I would like the VR6 in all black plz

ztrack157 · July 15th, 2009, 04:02 PM

^ They come as seen. I cannot hassle with a bunch of Custom orders. The VR exhaust are a little different and I can tweak with them for the GB. The V6R is a whole nother can of worms. If you choose to you can have it powder coated when you get it.

army_laxer · July 24th, 2009, 09:52 PM

are you still selling these exhausts for this price?

ztrack157 · July 24th, 2009, 10:03 PM

Yes I will be placing the order in the beginning of august. I'm going to try to do fast shipping on it so full payment will be needed at the end of the GB

ztrack157 · July 24th, 2009, 10:34 PM

V6R sound clip will be up next week.

ztrack157 · July 25th, 2009, 01:10 AM

OK ladies and gentlemen. I am changing this up a little bit so you get the exhausts in August rather than September. The Full $260+$5 for fees is due on the 4th for the exhausts. I will order them on the 6th or 7th and then it will take me about 12 days to get them to you. From there you can enjoy your shiny new exhaust.
If our not game for that it is understandable but I don't like and it just doesn't feel right making people wait for eons, like the customers currently waiting on the ocean freight.

ztrack157 · July 25th, 2009, 01:15 AM

1. Ohh Snap VR Black+ bag of skittles
2. Rookie V6R quiet
3. Duvi VR Black
4. Chamus57 V6R Quiet
5. xTKx V6R
6. blubyu V6R
7. HA-Y-N Ninja VR Black
8. Istreefitty V6R all black if doable + Difference in shipping over $30
9.
10.

istreefitty · July 25th, 2009, 01:46 AM

Wooo I am soo excited if all black isn't doable I will order seperate I guess let ms know
Posted via Mobile Device

ztrack157 · July 25th, 2009, 01:49 AM

I will try really hard to get it all black for you. But bram does have final say.

istreefitty · July 25th, 2009, 01:58 AM

Yea I saw the all black version on the origional websight and fell in love thanks for the help

off topic: does sportisi flushmounts require wire cutting and do they come with instructions??? Thanks
Posted via Mobile Device

July 10th, 2009, 10:01 AM	#122
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Airfilter I can get. Jet Kit's I don't even screw with since you can get them everywhere. I may add those to the accessories section at a later date. __________________________________________________ Sportisimoto USA is born.

July 10th, 2009, 10:03 AM	#123
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	1. Ohh Snap VR Black+ bag of skittles 2. Rookie V6R quiet 3. Duvi VR Black 4. Chamus57 V6R Quiet 5. xTKx V6R 6. blubyu V6R 7. HA-Y-N Ninja VR Black 8. 9. 10. __________________________________________________ Sportisimoto USA is born.

July 10th, 2009, 10:07 AM	#124
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Andrew http://www.factorypro.com/ I think you can only buy direct for the 250R kit. __________________________________________________ Sportisimoto USA is born.

July 10th, 2009, 10:54 AM	#126
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Bone stock is never recommended. Shimming the needles may get you by but installing a jet kit is highly recommended. __________________________________________________ Sportisimoto USA is born.

July 10th, 2009, 06:03 PM	#128
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	The Tank covers are $65 __________________________________________________ Sportisimoto USA is born.

July 10th, 2009, 08:05 AM	#121
HA-Y-N NINJA ninjette.org member Name: Cholby Location: Tualatin,Oregon Join Date: May 2009 Motorcycle(s): 2008 Plasma Blue 250 ninja Posts: 74	Put the HA-Y-N Ninja done for VR ALL BLACK if possible. I also would like DYNO Jet Kit STAGE 2 and the air filter if you can get it. Let me know what cost will be and if you can get it all. Much Mahalo's

July 10th, 2009, 10:15 AM	#125
divingtigger Pedal Power Name: Rob Location: Winterpeg (Winnipeg) Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401	DO we need to get a jet kit for these systems to work?? or will it work with bone stock?

July 10th, 2009, 06:01 PM	#127
Nickds7 ninjette.org guru Name: Nick Location: Sacramento, California. Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379	How much to include a monster energy tank cover? I'm in after I see db ratings

July 10th, 2009, 08:52 PM	#129
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Video of the VR black will be on Monday hopefully. Db rating when I pick up a db meter. __________________________________________________ Sportisimoto USA is born.

July 11th, 2009, 09:01 AM	#130
Captain Insaneo ninjette.org member Name: Joe Location: Mahopac, NY Join Date: Jun 2009 Motorcycle(s): 2009 Kawasaki Ninja 250R SE Posts: 13	So how much shipped for the full VR system, polished though, don't really like the black all that much.

July 11th, 2009, 10:14 AM	#131
HA-Y-N NINJA ninjette.org member Name: Cholby Location: Tualatin,Oregon Join Date: May 2009 Motorcycle(s): 2008 Plasma Blue 250 ninja Posts: 74	Please put me down for an air filter and cleaning kit as well!! Let me get this straight, we should get the exhaust the ending of aug? Mahalo

July 11th, 2009, 11:40 AM	#132
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	THe GB Ends the first week of August. I will place the order the following week. From there Ocean Freight takes a month to get to me. Unless you guys want them sooner but if thats the case the $260 price is not possible. Sometime in September is the realistic timeframe for you to receive it. And I only offer this to those who are willing to wait a little while and save $75. Captain insaneo it is still the same price. And cholby I have an extra filter in the first shipment if you want it. __________________________________________________ Sportisimoto USA is born.

July 11th, 2009, 06:41 PM	#133
HA-Y-N NINJA ninjette.org member Name: Cholby Location: Tualatin,Oregon Join Date: May 2009 Motorcycle(s): 2008 Plasma Blue 250 ninja Posts: 74	ok. how much is the filter? I miss the GB on the Tire Hugger, how much are those? i am thinking of a blue one. i am thinking of doing up my bike all at once

July 11th, 2009, 06:54 PM	#134
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Filters are $45 shipped. Huggers are $170 shipped. I have a few CPB huggers left in this shipment coming in about a month. __________________________________________________ Sportisimoto USA is born.

July 13th, 2009, 10:38 AM	#135
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Ok so I got a new VR exhaust in today for my bike. The header is a new design so it isn't really a finished product just yet but I like it. Link to original page on YouTube. __________________________________________________ Sportisimoto USA is born. Last futzed with by ztrack157; July 13th, 2009 at 01:25 PM.

July 13th, 2009, 08:41 PM	#136
andrewwoo WHEE! Name: Andrew Location: VA Join Date: Apr 2009 Motorcycle(s): 2009 Black Kawi 250R Posts: 91	ooo man! that means im going to get my exhaust soon? can i get stickers with that? __________________________________________________ 2009 Metallic Diablo Black Ninja 250R 6000K H7 HIDs \| Targa Fender Eliminator Pazzo Levers \| PROGRIP Tank Pad

July 13th, 2009, 08:56 PM	#137
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Your's should be here in less than a month Andrew. I paid to have this one shipped to me and it wasn't Cheap. Me, Mike Sema, and Kazam are the only people who will have this style. The New VR black can is Aluminum for a smoother finish. Ours are hand pounded and formed. The new headers also are not smooth mandrel bends but a series of welds (does not effect power dyno sheets back it up and it was vigorously tested). I actually prefer this look while some probably do not even though you'll never see it. Then everything is smoothed out and polished. Man my video sucks to because this thing is loud. Almost two bros loud but not quite. __________________________________________________ Sportisimoto USA is born.

July 14th, 2009, 07:44 AM	#138
kazam58 Sarcasm: Yea that'll work Name: Andy Location: Essex Jct, VT Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330	Very nice. I can't wait, especially after that vid. Not to mention that it sounds fricken awesome. From what I've been able to distinguish from all the vids of different exhausts, this one sounds the best, loud or not. I also wanted to ask, out of curiosity more than anything, how did you make yours black? Did you have it coated somehow, or do you still have that paint on it that you said you were having problems with? __________________________________________________ '08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust

July 14th, 2009, 08:29 AM	#139
ironglory ninjette.org member Name: Mhilz Location: Earth Join Date: Jun 2009 Motorcycle(s): 2005 ZZR600 Midnight Blue Posts: 114	Do you have to rejet w/ this upgrade? __________________________________________________ A mind is like a parachute, open it up & enjoy the view.

July 14th, 2009, 08:42 AM	#140
Captain Insaneo ninjette.org member Name: Joe Location: Mahopac, NY Join Date: Jun 2009 Motorcycle(s): 2009 Kawasaki Ninja 250R SE Posts: 13	Is there any way to get this exhaust before september? I know this is a special deal, so i was just wondering like if we pay retail price can we have it sooner?

July 14th, 2009, 01:10 PM	#141
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	If your willing to pay full retail I can get it for you. It will take 12 days from order to delivery. It will suck on my end because I won't make anything since I will be eating the shipping. But it will still be about $70 cheaper than if you buy direct from bram. If 3 or more buy at once I will order not and no waiting at all is required. I will Drop the price to $315 if you guys would like to do it that way. I do recommended waiting about a week though because the newer and updated models will be available then. JEt kit is recommended. Andy Mine was powdercoated with standard flat black. The can doesn't get hot enough to effect it but it was hot eough that the paint couldn't handle it. __________________________________________________ Sportisimoto USA is born.

July 14th, 2009, 01:50 PM	#142
Captain Insaneo ninjette.org member Name: Joe Location: Mahopac, NY Join Date: Jun 2009 Motorcycle(s): 2009 Kawasaki Ninja 250R SE Posts: 13	Okay so for $315, i can have the exhaust within the next 2-3 weeks...? The VR race exhaus that is, the same one that's on your bike.

July 14th, 2009, 01:52 PM	#143
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Same as on my bike yes. Just with the newer can not the hand pounded one. __________________________________________________ Sportisimoto USA is born.

July 14th, 2009, 06:58 PM	#145
HA-Y-N NINJA ninjette.org member Name: Cholby Location: Tualatin,Oregon Join Date: May 2009 Motorcycle(s): 2008 Plasma Blue 250 ninja Posts: 74	so let me get this straight, if i pay $315 i get the NEW VR all black(tip is black too not polished?)all smooth exhaust in 12 days from the time of ordering?

July 14th, 2009, 07:06 PM	#146
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	If you and Captain Insaneo both buy then yes. But Like I said give me about a week to get things squared away. Part of the GB thing was I was waiting on the newer models. I will see about an all black one for you and an all polished for Captain but I can't make promises that you'll get what you want in that dept since that is custom stuff. But I will Check. __________________________________________________ Sportisimoto USA is born.

July 14th, 2009, 07:51 PM	#147
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Heres a video of the VR without the Supressor. This is not recommended because performance won't be as good. But hey its our exhaust. Link to original page on YouTube. __________________________________________________ Sportisimoto USA is born.

July 14th, 2009, 11:22 PM	#148
Nickds7 ninjette.org guru Name: Nick Location: Sacramento, California. Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379	Sounds like open pipe :P

July 15th, 2009, 12:19 AM	#149
istreefitty sir posts a lot Name: michael Location: HI Join Date: Jul 2009 Motorcycle(s): '09 Black 250R Posts: 267	OKOKOKOK Im down for GB but is it the pictures on the last thread or is it this one exhaust because i like the shorty fatty look better (kinda like the HR1 but waaayyyyy better sounding)

July 15th, 2009, 08:17 AM	#150
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Both cans seen at sportisimoto-usa.com are in the GB. __________________________________________________ Sportisimoto USA is born.

July 15th, 2009, 09:27 AM	#151
istreefitty sir posts a lot Name: michael Location: HI Join Date: Jul 2009 Motorcycle(s): '09 Black 250R Posts: 267	put me down for the GB when do you need the deposite?? I would like the VR6 in all black plz Last futzed with by istreefitty; July 15th, 2009 at 09:28 AM. Reason: additional info

July 15th, 2009, 04:02 PM	#152
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	^ They come as seen. I cannot hassle with a bunch of Custom orders. The VR exhaust are a little different and I can tweak with them for the GB. The V6R is a whole nother can of worms. If you choose to you can have it powder coated when you get it. __________________________________________________ Sportisimoto USA is born.

July 24th, 2009, 09:52 PM	#153
army_laxer ninjette.org newbie Name: Robert Location: mechanicsburg Join Date: Jul 2009 Motorcycle(s): ninja 250r Posts: 1	are you still selling these exhausts for this price?

July 24th, 2009, 10:03 PM	#154
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Yes I will be placing the order in the beginning of august. I'm going to try to do fast shipping on it so full payment will be needed at the end of the GB __________________________________________________ Sportisimoto USA is born.

July 24th, 2009, 10:34 PM	#155
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	V6R sound clip will be up next week. __________________________________________________ Sportisimoto USA is born.

July 25th, 2009, 01:10 AM	#156
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	OK ladies and gentlemen. I am changing this up a little bit so you get the exhausts in August rather than September. The Full $260+$5 for fees is due on the 4th for the exhausts. I will order them on the 6th or 7th and then it will take me about 12 days to get them to you. From there you can enjoy your shiny new exhaust. If our not game for that it is understandable but I don't like and it just doesn't feel right making people wait for eons, like the customers currently waiting on the ocean freight. __________________________________________________ Sportisimoto USA is born.