May 30th, 2010, 12:22 PM | #1 |
ninjette.org guru
Name: Kit
Location: New Mexico
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250r, 1996 Yahmaha YZ 125... Both in Blue the coolest color Posts: 285
|
Question about the washers to use when shimming the needles
Alright I have been reading about shimming the needles here all weekend, I think it will be my next DIY project along with removing the kleen system to get rid of the popping from my new MGP exhaust. My question is I have read about the washers being 3mm or #4 SAE, is this the outside diameter of them or the size of the hole the needle will go through? how big is the outside diameter of them? I have not found any photos of the washers aside from some on the needles. (anyone who could post some it would be great!!!) I just want to make sure I get the right ones the first time... I assume they will tiny little things. also is there anything else I should think of doing while I have her naked?
__________________________________________________
"Well you know, for me, the action IS the juice" |
|
May 30th, 2010, 12:35 PM | #2 |
ninjette.org member
Name: None
Location: Atlanta
Join Date: Feb 2010 Motorcycle(s): Lots Posts: 55
|
|
|
May 30th, 2010, 12:38 PM | #3 |
Join Date: Nov 2008 Posts: Too much.
|
http://www.ninjette.org/forums/showthread.php?t=11963
http://www.ninjette.org/forums/showthread.php?t=24845 3mm is the size of the hole. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
No change after shimming needles with two washers | jasonz1c | 2008 - 2012 Ninja 250R Tech Talk | 13 | January 30th, 2014 08:08 AM |
question about shimming those needles | fizzer914 | 2008 - 2012 Ninja 250R Tech Talk | 6 | June 11th, 2012 03:12 AM |
Need 3mm washers for some shimming? Come get'm | Hokie11 | 2008 - 2012 Ninja 250R Tech Talk | 16 | November 30th, 2010 11:21 AM |
FREE!!! 3MM Washers for Shimming Your Carb Needles | kkim | 2008 - 2012 Ninja 250R Tech Talk | 1 | September 10th, 2010 02:26 AM |
Shimming the needles question | Tubesock | 2008 - 2012 Ninja 250R Tech Talk | 20 | August 15th, 2009 12:17 PM |
|
|