March 30th, 2009, 04:42 PM | #1 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
Aftermarket Foot Pegs
I finally found some nice affordable pegs for my 250R. I really wanted some that were fully rounded but still solid. Everytime I would check ebay I would only find some for the pre gen 250 or passenger set but not ours. I took the risk and ordered these that are supposed to be for the older model 250 and found that they fit! The only things I had to do was squish the spring alittle forward. Turned out just the way I wanted and they feel a whole lot better then the rubber ones.
Just thought I would pass this along. here the link to the sellers store http://stores.shop.ebay.com/LuckyBik...34Q2ec0Q2em322 Combined with the foot extenders I feel like I have real aftermarket rearsets now. |
|
March 30th, 2009, 04:46 PM | #2 |
ninjette.org member
Name: Lisa
Location: detroit, mi
Join Date: Mar 2009 Motorcycle(s): 2009 Kawasaki ninja 250 Posts: 28
|
Those look good!
__________________________________________________
VPS Servers go to Filelan.com |
|
March 30th, 2009, 04:48 PM | #3 |
Fighting Texas Aggie '05
Name: Neil
Location: Hutto, TX
Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.
|
comment back after awhile on weather they sag or not
|
|
March 30th, 2009, 04:49 PM | #4 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
|
|
March 30th, 2009, 04:52 PM | #5 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
|
|
March 30th, 2009, 07:59 PM | #6 |
ninjette.org member
Name: Ichiro
Location: So.Cal. Long Beach.
Join Date: Dec 2008 Motorcycle(s): 2008 250r(sold). 2013 Kymco Super8 150 Posts: 223
|
Question: Do those pegs fold up if hit from the bottom like the stock pegs or are they locked in position straight out?
|
|
March 30th, 2009, 09:11 PM | #7 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
They fold just like the originals would because they still use the same spring. The spring is just a little more foward but it works exactly like stock.
|
|
March 30th, 2009, 09:21 PM | #8 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
Hmm just checked his store and all I see are the 88-07 footpegs. Did you buy the only pair?!?! jk
|
|
March 30th, 2009, 09:25 PM | #9 |
Join Date: Nov 2008 Posts: Too much.
|
do they have reading courses at that college you're attending?
|
|
March 30th, 2009, 09:30 PM | #10 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
I was afraid I was gunna skip it and realized I shouldn't of posted that cause someone would probably point it out. And in fact that dont smarty...for some reason they expect you to be able to do that already? I dunno very closed minded if you ask me. Guess imma have to look again
|
|
March 30th, 2009, 09:34 PM | #11 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
Haha waitttt im an idiot. I see why you said thattttt. Its not on the site...he mentioned it on the top of his postttt. I am not that guy. Need to go see your posting thread I guess now huh.
|
|
March 30th, 2009, 09:34 PM | #12 | |
Live 2 Ride Forced 2 Work
Name: Chris
Location: Guam
Join Date: Mar 2009 Motorcycle(s): 2008 RED 250r Posts: 386
|
Quote:
hope this helps. |
|
|
March 30th, 2009, 09:35 PM | #13 | |
ninjette.org certified postwhore
Name: zartan
Location: spam la
Join Date: Oct 2008 Motorcycle(s): 08 250 R Posts: A lot.
|
Quote:
on a more serious note: Those look really sturdy..I have some different ones( the same KKim had at one time and his sagged mine didn't until a few rides later. But not bad..just a little.) I might look into these new ones...
__________________________________________________
"Don't let adverse facts stand in the way of a good decision" Colin Powell |
|
|
March 30th, 2009, 09:38 PM | #14 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
March 30th, 2009, 09:42 PM | #15 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
haha I set myself up for that one....kkim how long did it take until your foot pegs started sagging did the peg itself wear down.
|
|
March 30th, 2009, 09:44 PM | #16 |
ninjette.org member
Name: Ichiro
Location: So.Cal. Long Beach.
Join Date: Dec 2008 Motorcycle(s): 2008 250r(sold). 2013 Kymco Super8 150 Posts: 223
|
Sorry to be a pain, but I don't think the original spring affects whether the pegs fold up or not. The spring is used to push the peg back DOWN after it folds UP when it scrapes or hits the road. Would just like to know if you pull up on the peg with your finger, does it fold up like the stock one? Thanks.
|
|
March 30th, 2009, 09:47 PM | #17 | |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
Quote:
|
|
|
March 30th, 2009, 09:48 PM | #18 |
ninjette.org member
Name: Ichiro
Location: So.Cal. Long Beach.
Join Date: Dec 2008 Motorcycle(s): 2008 250r(sold). 2013 Kymco Super8 150 Posts: 223
|
Thanks!
|
|
March 30th, 2009, 09:49 PM | #19 |
Join Date: Nov 2008 Posts: Too much.
|
I'd say a few months. It has to do with how the inside edge of the peg is against the frame side of the peg holder. The pegs Z and I bought were for some Suzuki... should have known then something wasn't right.
Don't worry about it... the ones you have look quite beefy and if they do sag, they can be fixed with a dab or two of JB Weld. |
|
March 30th, 2009, 09:49 PM | #20 | |
ninjette.org certified postwhore
Name: zartan
Location: spam la
Join Date: Oct 2008 Motorcycle(s): 08 250 R Posts: A lot.
|
Quote:
I edited my post , Kkim and I had a different type of aftermarket ones. they did not look as strong as these.
__________________________________________________
"Don't let adverse facts stand in the way of a good decision" Colin Powell |
|
|
March 30th, 2009, 09:50 PM | #21 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
How does the grip feel on them? I have a feeling the rubber on the stock ones would be better wet? or am I making things up?
|
|
March 30th, 2009, 09:57 PM | #22 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
They do have grip rings if you look closely but the rubber ones were alot stickier. As far as wet im not sure but dont most sportbikes come with aluminum pegs instead of rubber or am i wrong.
|
|
March 30th, 2009, 10:01 PM | #23 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
|
|
March 31st, 2009, 02:23 PM | #24 |
ninjette.org member
Name: Pete
Location: Clifton, NJ
Join Date: Mar 2009 Motorcycle(s): 2009 BLACK Kawasaki Ninja 250R Posts: 164
|
These looks nice, I might get them since they're affordable.
btw, are they hard to install?
__________________________________________________
|
|
March 31st, 2009, 02:41 PM | #25 |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
ya i wanted to know about the instal
|
|
March 31st, 2009, 02:54 PM | #26 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
Its really easy just remove the clip on the bolt that runs through the peg and slide the bolt out then place everything back on and slide the pin into place. The only thing is that you kind of have to put pressure on the spring in a downward toward the bike motion to slide the pin through. Look a Kellys 3rd and 4th pic in here for reference http://www.ninjette.org/forums/showthread.php?t=10129 (hope you dont mind Kelly).
|
|
March 31st, 2009, 03:00 PM | #27 |
Join Date: Nov 2008 Posts: Too much.
|
nope... not a prob.
|
|
March 31st, 2009, 03:33 PM | #28 |
Track Junkie
Name: Jon
Location: Dallas
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r Track Bike, DR350 commuter, KDX220 woods bike Posts: 602
|
we use to use pegs that looked just like that on our mini bikes (ysr50). they were plenty sturdy enough. we crashed it A LOT and they held up well. eventually we did damage the backside (where it pushes on the frame or bracket to keep from folding down) somehow and they began to "sag"... we siliconed a penny behind it and it was good as new again.
__________________________________________________
Las Escobas -- Track Bikes Save Lives JonBroom.com |
|
March 31st, 2009, 03:40 PM | #29 | |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
Quote:
|
|
|
March 31st, 2009, 04:42 PM | #30 |
Live 2 Ride Forced 2 Work
Name: Chris
Location: Guam
Join Date: Mar 2009 Motorcycle(s): 2008 RED 250r Posts: 386
|
I'm doing this mod ASAP!! Thanks shift!
|
|
April 2nd, 2009, 01:23 AM | #31 |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
how have they been holding up? how is the grip on em? they look sick i am really thinking of this one
|
|
April 3rd, 2009, 08:31 AM | #32 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
Those look good.
+ their black.. If it aint something green it's gotta be something black! I'll scoop up a set. Thanks for the link.
__________________________________________________
|
|
April 3rd, 2009, 03:42 PM | #33 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
I checked up on my pegs and so far they have held up fine. No damage to the pegs angle or paint. The grip is pretty good but I havn't seen how they hold up wet. I also forgot to mention for those who are getting these that I found out that the peg can actually unscrews from the mount. Im not sure why they do this but lots of other pegs do to. It didnt fall out but I saw another pic of some pegs so I tried it you might want to put some locktite in there just in case but im not sure.
|
|
April 3rd, 2009, 04:10 PM | #34 |
Live 2 Ride Forced 2 Work
Name: Chris
Location: Guam
Join Date: Mar 2009 Motorcycle(s): 2008 RED 250r Posts: 386
|
Shift can you take a picture of this? I thought there was a pin or something holding the peg in place- or am I thinking of something else??
|
|
April 3rd, 2009, 04:24 PM | #35 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
April 3rd, 2009, 11:07 PM | #36 |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
did it end up getting loose while you were riding?
|
|
April 4th, 2009, 04:09 AM | #37 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
no I just tried to unscrew it since I saw another pic of some pegs that could unscrew. It wont get loose but I thought I would just put some locktite. It might be able to do that for replacement purposes or something. Ill put up a pic later.
|
|
April 4th, 2009, 09:28 AM | #38 |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
cool thanks for the info!
|
|
April 4th, 2009, 10:18 AM | #39 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
I ordered some of these things last night. I'm pretty excited.
|
|
April 4th, 2009, 10:49 AM | #40 |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
Im gonna order some when i get paid cause right now i am broke
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to raised foot pegs? | caineroad | General Motorcycling Discussion | 4 | November 6th, 2013 03:23 PM |
Question about foot pegs. | Hawk637 | General Motorcycling Discussion | 5 | April 19th, 2011 10:22 AM |
More room at the foot pegs? | iceman.kcmo | 1986 - 2007 Ninja 250R Tech Talk | 8 | January 16th, 2010 11:11 AM |
aftermarket foot pegs? | RRTRIDER | 2008 - 2012 Ninja 250R Farkles | 14 | December 6th, 2009 11:28 AM |
Grinding Foot Pegs | jonb08 | 1986 - 2007 Ninja 250R Tech Talk | 14 | June 17th, 2009 06:57 PM |
|
|