August 27th, 2013, 08:21 PM | #1 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
2001 Ninja 250 Part out
Hey guys I've got an '01 Ninja 250 that has a broken frame and decided the best option for me at the moment is to part it out. So, I've got the whole bike I'll list a few things that are broken to save some questions.
The BAD: Front upper fairing has a bit of road rash and a couple cracks one about 5-7in long and one right at the bolt. Both fixable if you have the skills. Front lower fairing (no picture right now) is cracked right in the front above the grille. Also fixable. Fender? whatever you wanna call it for the front tire is good but has a few scratches. Left side fairing has a crack in it where the 'knob' click into the 'tab' on the gas tank. also its missing one of the rear 'knobs' otherwise its in good condition. Right side fairing is in good condition however the two front 'knobs' on the inside are glued on with who knows what kind of glue. Previous owner did it and its strange. Rear fairing is cracked underneath Gas tank is dented up pretty bad on both the top and the right side. And punctured cause a dummy not me, put to long of bolts in there! The front turn signals are not stock, they are crappy aftermarket signals. Headlight/speedo bracket is junk. However the speedo and headlight are in okay condition. Handlebars are bent but I believe forks are all good. The GOOD: Almost brand new (500 or so miles on it) Pirelli Sport Demon rear tire. 130 90 16. Decent (but stock) front tire with maybe 25-35% tread left? I'm not sure. Seat is in great condition! SOLD Runs good! not sure how other ninjas are but I just had to choke it on start up then ease out on the choke and it purrred. (have to check the mileage) and as far as other parts on the bike. Just ask. I'll be adding more pictures in a few min.
__________________________________________________
Ride safe brodahs! Last futzed with by hawker1693; August 30th, 2013 at 06:21 PM. |
|
August 27th, 2013, 08:34 PM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
How much for the headlight/gauge/fairing bracket ( throne the mirrors also bolt to) and the gauge cluster
To 48161 Thanks! *edit* crap, just saw you said the bracket is crap. Where in MI are you? Maybe I can ride out for some parts. Thanks!
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
August 27th, 2013, 08:50 PM | #3 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
I am in Decatur, MI. About 2 and a half hours from you I believe.
__________________________________________________
Ride safe brodahs! |
|
August 27th, 2013, 09:23 PM | #4 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
man I wish I had money Q_Q I would so jump on the engine and seat to help with my '01 rebuild so I wouldn't have to actually rebuild the engine lol
|
|
August 28th, 2013, 12:07 PM | #5 |
ninjette.org member
Name: Eric
Location: Los Angeles
Join Date: Apr 2013 Motorcycle(s): '86 Honda VFR700 Posts: 173
|
Definitely interested in the engine, depending on mileage and price.
|
|
August 28th, 2013, 01:13 PM | #6 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
17,514 is what the speedo says. But I don't know if that's actual. What can you pay for it just make me an offer.
__________________________________________________
Ride safe brodahs! |
|
August 28th, 2013, 03:23 PM | #7 |
ninjette.org certified postwhore
Name: Frugal
Location: Dallas/Fort Worth (DFW)
Join Date: Mar 2010 Motorcycle(s): Several Posts: A lot.
|
Man, it's too bad you can't go get the bike over in Delaware, $500 is quite reasonable and between the two you can come up with a pretty decent bike, and recoup some of your costs by selling off the duplicate and left over parts.
http://www.ninjette.org/forums/showthread.php?t=147643 |
|
August 29th, 2013, 07:11 PM | #8 |
ninjette.org member
Name: Anthony
Location: Marble Hill, MO
Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231
|
Hey, I might be interested in the Pirelli Sport Demon rear tire as mine is getting pretty worn. Really only 500 miles?
Thanks, Tony
__________________________________________________
1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page. |
|
August 30th, 2013, 06:29 PM | #9 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Yeah, I got the tire a few weeks after I got the bike and had very little chance to ride it before the frame problem :/ So yeah its practically new.
__________________________________________________
Ride safe brodahs! |
|
August 31st, 2013, 03:32 PM | #10 | |
ninjette.org member
Name: Anthony
Location: Marble Hill, MO
Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231
|
Quote:
Thanks, Tony
__________________________________________________
1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page. |
|
|
September 1st, 2013, 10:00 PM | #11 |
Garage Junky
Name: nick
Location: north dallas area
Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35
|
I need a good working carb for my girlfriends bike she has owned the bike since july and hasnt got to ride it yet the guy we got it from sold us a pos I literally had to rebuild everything and if you could let it go for a reasonable price we would love to have it please p.m. me thanks
|
|
September 3rd, 2013, 01:15 AM | #12 | ||
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Quote:
Quote:
__________________________________________________
Ride safe brodahs! |
||
|
September 3rd, 2013, 06:15 AM | #13 |
ninjette.org member
Name: Anthony
Location: Marble Hill, MO
Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231
|
Here's hoping that you can get it fixed!
Tony
__________________________________________________
1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page. |
|
September 5th, 2013, 04:49 PM | #14 |
ninjette.org member
Name: Phil
Location: Austin, Tx
Join Date: Jul 2013 Motorcycle(s): 2006 Kawasaki Ninja 250 Posts: 12
|
Sorry for the late reply, but just got the seat and put it on. Thanks =D
|
|
September 9th, 2013, 03:57 PM | #15 |
ninjette.org member
Name: Bryan
Location: TX
Join Date: Apr 2012 Motorcycle(s): '90 ex250 Posts: 155
|
How much you lookin for the petcock?
|
|
September 10th, 2013, 08:50 AM | #16 |
Garage Junky
Name: nick
Location: north dallas area
Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35
|
$40
|
|
September 11th, 2013, 06:57 AM | #17 |
ninjette.org member
Name: Cody
Location: Wilmington, NC
Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249
|
How much for the coils and plug wires? Mine are crapping out on me.
|
|
September 12th, 2013, 08:41 PM | #18 | ||
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Quote:
Quote:
$20 shipped $38 shipped
__________________________________________________
Ride safe brodahs! |
||
|
September 12th, 2013, 10:13 PM | #19 |
Garage Junky
Name: nick
Location: north dallas area
Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35
|
I will take that petcock for 20 and might want that carb can you p.m. me a picture of it? and it will be sat before I can buy that petcock from you
|
|
September 12th, 2013, 10:16 PM | #20 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
I'll have to take a picture of the carb tomorrow.
__________________________________________________
Ride safe brodahs! |
|
September 12th, 2013, 10:33 PM | #21 |
Garage Junky
Name: nick
Location: north dallas area
Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35
|
Alright thanks
|
|
September 13th, 2013, 05:22 AM | #22 |
ninjette.org member
Name: Bryan
Location: TX
Join Date: Apr 2012 Motorcycle(s): '90 ex250 Posts: 155
|
dag... Tommy can have it. I just bought one on ebay out of impatients. =/
|
|
September 13th, 2013, 05:31 AM | #23 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Sorry man, I was trying to figure out if I was going to keep the essential parts and get it fixed then street fighter it but I ran into an 08 that was too good of a deal.
__________________________________________________
Ride safe brodahs! |
|
September 13th, 2013, 05:42 AM | #24 | |
ninjette.org member
Name: Anthony
Location: Marble Hill, MO
Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231
|
Quote:
Thanks, Tony
__________________________________________________
1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page. |
|
|
September 13th, 2013, 07:01 AM | #25 |
ninjette.org sage
Name: bob
Location: Earf
Join Date: Apr 2013 Motorcycle(s): 2005 Ninja 250, 2006 SV650N Posts: 642
|
How much for toolkit?
|
|
September 13th, 2013, 06:42 PM | #26 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
__________________________________________________
Ride safe brodahs! |
|
September 14th, 2013, 10:11 AM | #27 |
ninjette.org member
Name: Dennis
Location: Kansas City
Join Date: Sep 2013 Motorcycle(s): 2005 Ninja 250 Posts: 12
|
How much for the rear brake peddle, if its not bent?
I'm also interested in the front bushings that hold the side fairings on. Battery strap? Thanks |
|
September 17th, 2013, 01:03 PM | #28 |
ninjette.org newbie
Name: Michael
Location: New Orleans, LA
Join Date: Nov 2012 Motorcycle(s): 01 Ninja ex250 (sold!), 06 Ninja Ex250 Posts: 6
|
Im looking for the left handlebar to 70119, I dont need the controls tho. Someone knocked my bike over at the grocery and when I found it lying over it had bent the bar. I gotta take the bike to see my dad in Alabama next month so its gotta get fixed!
|
|
September 18th, 2013, 08:18 PM | #29 | |||
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Quote:
Quote:
Quote:
Don't hate me please! I know this is only the second time I've changed my mind.
__________________________________________________
Ride safe brodahs! |
|||
|
September 25th, 2013, 07:01 PM | #30 |
ninjette.org member
Name: Grant
Location: Mid-Michigan
Join Date: Aug 2013 Motorcycle(s): 2006 Ninja 250 Posts: 83
|
If you change your mind again let me know. I'll take the cracked frame as long as it's titled still.
|
|
September 25th, 2013, 08:14 PM | #31 |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Haha I know I changed my mind a gazillion times..but I actually dropped it off to be welded so unless something goes horribly wrong I'll be riding it next week.
__________________________________________________
Ride safe brodahs! |
|
September 27th, 2013, 03:30 AM | #32 |
ninjette.org member
Name: Emily
Location: Nc
Join Date: Dec 2011 Motorcycle(s): 2004 Kawasaki Ninja ex250 Posts: 33
|
Hey.
How much for the front fender? |
|
September 28th, 2013, 08:40 AM | #33 |
ninjette.org newbie
Name: Richard
Location: DFW
Join Date: Sep 2013 Motorcycle(s): 05 ninja 250 94 BMW K75 Posts: 1
|
engine to 75023? and also rear tire perhaps?
Also, willing to part engine? I need a cylinder/head section but don't need the bottom end/crank/trans. Had a truck back into and crack engine upper case (cylinders) and head. It'd be much easier to ship just that portion I imagine, and still leaves crank/trans parts for you to sell. Thanks, Richard |
|
September 30th, 2013, 08:20 PM | #34 | |
ninjette.org member
Name: Hawker
Location: MI
Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66
|
Quote:
__________________________________________________
Ride safe brodahs! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2001 Ninja 250 Streetfighter | FvnnyL3tt3r1ng | Motorcycle-related | 1 | January 24th, 2015 07:04 PM |
08' Ninja 250 Parts bike part out *you name the part and price* | BuckyNaked | Motorcycle-related | 106 | July 12th, 2011 02:01 PM |
2001 ninja 250 | james250ninja | 1986 - 2007 Ninja 250R Tech Talk | 1 | April 22nd, 2010 06:45 PM |
|
|