ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old March 22nd, 2015, 05:55 AM   #1
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
Front and rear brake pads for $11?

Hitting Amazon for some misc parts and came across the following:

http://www.amazon.com/dp/B005NFITT6/...I1TORLGN7NL709

Anyone have any reviews on Kevlar brake pads? $11 with shipping for front and rear pads sounds too good to be true, and I understand these are brakes, the main safety item on the bike, and its never good to cheap on the safety items, but I'm close to needing pads front and rear, and if these are ok, then I'll spring for it. Riding style, basically commuter on the highway. Don't get too crazy, don't do any track, don't do any twisties really, just enjoy riding around and occasionally taking long road between point A and B.

Thanks~
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


1 out of 1 members found this post helpful.


Old March 22nd, 2015, 08:56 AM   #2
Skullz
ninjette.org guru
 
Skullz's Avatar
 
Name: Ray
Location: 48162
Join Date: Aug 2013

Motorcycle(s): 2012 Ninja 250

Posts: 450
Not a bad set of pads that last a fair amount of time but they're organic pads so they don't have the bite the sintered pads do. They're a great pad for winter so you don't risk locking up the brakes as easily as you would with a good set of pads during the summer.
I got a set last winter that lasted around 6 months, a good pad that does what you need it to do on a budget.
Skullz is offline   Reply With Quote


Old March 22nd, 2015, 09:39 AM   #3
MrAtom
.
 
Name: .
Location: .
Join Date: Aug 2014

Motorcycle(s): .

Posts: A lot.
MOTM - July '15
I think i payed $15 for a set of ebc's for my pregen. You can afford $3 more.
MrAtom is offline   Reply With Quote


Old March 22nd, 2015, 09:57 AM   #4
Skullz
ninjette.org guru
 
Skullz's Avatar
 
Name: Ray
Location: 48162
Join Date: Aug 2013

Motorcycle(s): 2012 Ninja 250

Posts: 450
There are two sets.
Skullz is offline   Reply With Quote


Old March 22nd, 2015, 10:33 AM   #5
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
Did some research on it, ceramic vs Kevlar...at $11 I couldn't pass. Worst I can do is try them and not like it. Again, I have a very laid back riding style, if these don't work out, I'll go for something sintered, ceramic.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


Old March 23rd, 2015, 06:54 AM   #6
crazymadbastard
I'm crazy,your excuse is?
 
crazymadbastard's Avatar
 
Name: Winston
Location: Connecticut
Join Date: May 2013

Motorcycle(s): 250 2007 ninja

Posts: A lot.
Quote:
Originally Posted by DmbShn41 View Post
Did some research on it, ceramic vs Kevlar...at $11 I couldn't pass. Worst I can do is try them and not like it. Again, I have a very laid back riding style, if these don't work out, I'll go for something sintered, ceramic.
try em and let us know, I read one brief review that said they are noisy- for a different bike though.
__________________________________________________
My Cafe Racer Build
My intro post
crazymadbastard is offline   Reply With Quote


Old March 28th, 2015, 04:03 AM   #7
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
Pads showed up today. Haven't torn bike down yet as the Ohio weather is not cooperating....quick question though for those of you who have done brakes before. Are the pads the same size front and back? On mobile right now, can't post a pic, but I got two packets, each with two pads, and it seems they're hoth the same size, same mfr part number too. Thanks.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


Old March 28th, 2015, 05:42 AM   #8
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Yep, brakes are exactly the same front and rear.
csmith12 is offline   Reply With Quote


Old March 28th, 2015, 03:51 PM   #9
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
Good to know. Was hesitant to tear bike down to be disappointed by my 'so far' decent find. Thanks for reply. Will update when I get the pads on and a few miles on them.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


Old March 28th, 2015, 03:54 PM   #10
Skullz
ninjette.org guru
 
Skullz's Avatar
 
Name: Ray
Location: 48162
Join Date: Aug 2013

Motorcycle(s): 2012 Ninja 250

Posts: 450
Do yourself a huge favor and clean the caliper pistons before installing the new pads as they get really nasty with crud built up in there. Just carefully pump the brakes just a bit to expose the pistons a bit to clean metal and then use some emory cloth and clean em up. Failure to clean them will result in a sticking caliper which is something you do not want to have happen.
Skullz is offline   Reply With Quote


Old March 29th, 2015, 05:26 AM   #11
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
Will plan to do that and more. Clean everything down with brake cleaner, check the piston boot for good condition, hose, etc. I just put Yoshi rear set brackets on, so I also need to trim the hose from reservoir to pedal. Thanks for bringing it up.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


Old April 5th, 2015, 10:07 AM   #12
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
Logged around 100 miles on these brakes so far and I'm rather impressed for the $11 that they cost, but they are prob not ideal for track riding, unless you use them for one session. For my riding style, commuting, putting around town and the likes, they work well for that. I have always trained myself in riding to use both brakes as a balance in normal conditions, and these compliment that. Overall, I'm satisfied with them.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


Old April 5th, 2015, 01:30 PM   #13
MrAtom
.
 
Name: .
Location: .
Join Date: Aug 2014

Motorcycle(s): .

Posts: A lot.
MOTM - July '15
Wonder how long theyll last.
MrAtom is offline   Reply With Quote


Old April 5th, 2015, 02:23 PM   #14
DmbShn41
Wannabe Reborn
 
DmbShn41's Avatar
 
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009

Motorcycle(s): Blue 2008 Ninja 250

Posts: 302
At least 100 miles....I generally do 3-4k miles per riding season, depending on weather. If I get two seasons out of them, I will consider that extreme value for the price.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
DmbShn41 is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Are front and rear brake pads the same? warning 2013 - 2017 Ninja 300 Tech Talk 12 June 22nd, 2013 03:22 PM
Are front and rear brake pads the same? kchava 1986 - 2007 Ninja 250R Tech Talk 4 March 7th, 2011 10:39 AM
Front & Rear Brake pads ScorpionNinja 2008 - 2012 Ninja 250R Tech Talk 12 October 5th, 2010 08:39 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 04:51 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.