August 19th, 2010, 11:28 AM | #1 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Help Please! Clutch not engaging!
Okay so I installed Woodcraft Clipons and Pazzo Shorty Levers today. It all went smooth until after I installed everything but the new clutch lever. I removed the pivot bolt and nut from the clutch side stock lever. Then I proceeded to remove the cable end and insert it into the new lever. I put on the new lever and tested it out (while the rear stand is in use) and I sat on it. I fired her up, kicked hewr into first while holding in the clutch and the wheel kept moving... So what is wrong with it! Idk if i need to adjust the cable or not.
Suggestions? help is encouraged |
|
August 19th, 2010, 11:33 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
It is normal for the rear wheel to move some when in gear. Apply the rear brake to see if it stops. If it stops the wheel then your good. If it stalls the engine the I would say you need to adjust your clutch cable. See you owner's manual for specs.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 19th, 2010, 11:42 AM | #3 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Wow lemme check.. Maybe i shud take it off rear stand and try it? lol brb
|
|
August 19th, 2010, 11:53 AM | #4 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Yea so its fine now lol thanks bro. I took it off the rear stand and the clutch was fine! Any recommendations for premium adjustment for the clutch cable? the words in the owners manual are kinda confusing to me lol
|
|
August 19th, 2010, 12:00 PM | #5 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
I always adjust mine to where I am comfortable with its engagment point. Here is the instructions from the service manual. See if it helps you any.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 19th, 2010, 12:21 PM | #6 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Thanks!
|
|
August 19th, 2010, 12:22 PM | #7 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
No problem!
Welcome to our community!
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 19th, 2010, 12:27 PM | #8 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Thanks! I love this place. I am a semi-lurker but I post on occasion. The DIYs have saved me hundreds of shekels!
|
|
August 19th, 2010, 12:33 PM | #9 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
That's cool. Try to "pay it forward" when you can.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 19th, 2010, 12:35 PM | #10 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
I will try. I would ask what you mean, but I think I should find out on my own, since that phrase is everywhere on this site
|
|
August 19th, 2010, 12:41 PM | #11 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
It's simple...
When someone has done something nice for you, then you should try to do something nice for someone else. We all should do our part to make this a better world.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 19th, 2010, 12:46 PM | #12 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Thanks for that. Il do my best!
|
|
August 19th, 2010, 12:54 PM | #13 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
|
|
|
August 19th, 2010, 01:43 PM | #14 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
*Target Locked On* Engaging | xaple | Videos | 62 | June 28th, 2018 10:25 PM |
Clutch not fully engaging? | greenmachine | 2008 - 2012 Ninja 250R Tech Talk | 3 | August 10th, 2013 01:05 PM |
Why is my Clutch not fully engaging? | Kbeezer101 | 1986 - 2007 Ninja 250R Tech Talk | 16 | November 23rd, 2012 06:12 PM |
Front brake not engaging | SabreValkyrn | 1986 - 2007 Ninja 250R Tech Talk | 12 | November 9th, 2012 12:22 PM |
Engaging clutch to shift.. | Penguin250 | Riding Skills | 25 | May 29th, 2011 08:03 PM |
|
|