My 2nd little mod - Jardine fender eliminator

joyinc · May 14th, 2010, 07:25 PM

Soooo... I've been putting this off cause it looked so complicated, but a friend came over to help me who had done his recently and helped me out! It was a good thing he did because he had some tools that made it much easier

I'm so glad it's finally done!

Snake · May 14th, 2010, 09:19 PM

Looks great. I see you added some license plate lights. Is a tire hugger next?

addy126 · May 14th, 2010, 10:10 PM

Was it the same friend that put in your alarm system and bunched up the antenna wire?????

I'm not too fussy on the wires of the plate bolt lights are hanging down that low. I'd prefer them on the top which would allow me to hide the wiring a little more. Other than that nice install... and Rick is right...hugger must be next.

HKr1 · May 15th, 2010, 11:22 AM

Yeah, how come you put the lights on the bottom?

joyinc · May 15th, 2010, 02:26 PM

Quote:

Originally Posted by Snake

Looks great. I see you added some license plate lights. Is a tire hugger next?

I hadnt thought of that... do they make a big difference?

Quote:

Originally Posted by addy126

Was it the same friend that put in your alarm system and bunched up the antenna wire?????

lol no... but this friend helped me fix up the alarm... i didnt pull the blue wire out that much, but we stuck it to the frame thinking that if it was touching it, then it might work better. I didnt have to reset it or anything, it just started working perfectly

Quote:

Originally Posted by HKr1

Yeah, how come you put the lights on the bottom?

I didnt realize that the lights didnt fit the bracket until after we installed it... and it looked easier to drill through my licence plate instead of the bracket.... i had to drill my licence plate anyhow to make it fit. The Jardine wasnt made for Ontario licence plates lol. I'm either going to order lights that are smaller or drill the bracket someday when i have more time to tinker around again

g21-30 · May 15th, 2010, 02:44 PM

Joyce,

Check out this thread:

http://www.ninjette.org/forums/showthread.php?t=32295

I love that BLACK bike! kkim does too! He just won't admit it!

kkim · May 15th, 2010, 02:51 PM

bah...

Snake · May 15th, 2010, 03:03 PM

Quote:

Originally Posted by joyinc

I hadnt thought of that... do they make a big difference?

lol no... but this friend helped me fix up the alarm... i didnt pull the blue wire out that much, but we stuck it to the frame thinking that if it was touching it, then it might work better. I didnt have to reset it or anything, it just started working perfectly

I didnt realize that the lights didnt fit the bracket until after we installed it... and it looked easier to drill through my licence plate instead of the bracket.... i had to drill my licence plate anyhow to make it fit. The Jardine wasnt made for Ontario licence plates lol. I'm either going to order lights that are smaller or drill the bracket someday when i have more time to tinker around again

Tire huggers help keep water and dirt from being kicked up to the underside of the tail and sometimes on your backside.

rceezy · May 15th, 2010, 03:07 PM

That is awesome! ^_^

joyinc · May 15th, 2010, 05:24 PM

Quote:

Originally Posted by g21-30

Joyce,

Check out this thread:

http://www.ninjette.org/forums/showthread.php?t=32295

I love that BLACK bike! kkim does too! He just won't admit it!

that looks neat!

how can you not love a black bike? lol

joyinc · May 15th, 2010, 05:27 PM

oh i almost forgot... there was another thread around here with the jardine kit where the guy said in the removal process the stock screws that hold on the signal lights didnt survive. I have to second that! those are some cheap-o screws... mine made it, but barely, and i'm gonna replace them anyhow... anyone know what size they are?

May 14th, 2010, 07:25 PM	#1
joyinc ninjette.org member Name: Joyce Location: Ontario Join Date: Mar 2010 Motorcycle(s): black 2010 ninja250 Posts: 224	My 2nd little mod - Jardine fender eliminator Soooo... I've been putting this off cause it looked so complicated, but a friend came over to help me who had done his recently and helped me out! It was a good thing he did because he had some tools that made it much easier I'm so glad it's finally done!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jardine Fender Eliminator	cal95050	2008 - 2012 Ninja 250R Farkles	16	December 24th, 2012 02:58 PM
[sportrider - latest stories] - Jardine GP1-R Exhaust Systems for 09-11 Yamaha R6 Mod	Ninjette Newsbot	Motorcycling News	0	November 8th, 2011 01:10 PM
WTB: rear seat cowl, fender eliminator, and jardine gp1 exhaust for 08 ninja 250	motogirl724	Items Wanted	6	July 26th, 2010 01:18 PM
Jardine fender eliminator help please!	joyinc	2008 - 2012 Ninja 250R Farkles	6	April 30th, 2010 08:58 AM
Jardine fender eliminator pics	adouglas	2008 - 2012 Ninja 250R Farkles	4	October 7th, 2009 12:32 PM

May 14th, 2010, 09:19 PM	#2
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Looks great. I see you added some license plate lights. Is a tire hugger next?

May 14th, 2010, 10:10 PM	#3
addy126 ninjette.org certified postwhore Name: addy126 Location: Tx Join Date: May 2009 Motorcycle(s): '09 Kawasaki N-250 + '09 Vulcan 900 Classic Lt Posts: A lot.	Was it the same friend that put in your alarm system and bunched up the antenna wire????? I'm not too fussy on the wires of the plate bolt lights are hanging down that low. I'd prefer them on the top which would allow me to hide the wiring a little more. Other than that nice install... and Rick is right...hugger must be next.

May 15th, 2010, 11:22 AM	#4
HKr1 IC2(SW) Name: Kerry Location: Pensacola Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.	Yeah, how come you put the lights on the bottom?

May 15th, 2010, 02:44 PM	#6
g21-30 ninjette.org certified postwhore Name: Sam Location: Northern Virginia Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.	Joyce, Check out this thread: http://www.ninjette.org/forums/showthread.php?t=32295 I love that BLACK bike! kkim does too! He just won't admit it!

May 15th, 2010, 02:51 PM	#7
kkim Join Date: Nov 2008 Posts: Too much.	bah...

May 15th, 2010, 03:07 PM	#9
rceezy Lean Me Name: RC Location: America Join Date: Mar 2009 Motorcycle(s): 2008 Ninja 250 Posts: 678 Blog Entries: 4	That is awesome! ^_^

May 15th, 2010, 05:27 PM	#11
joyinc ninjette.org member Name: Joyce Location: Ontario Join Date: Mar 2010 Motorcycle(s): black 2010 ninja250 Posts: 224	oh i almost forgot... there was another thread around here with the jardine kit where the guy said in the removal process the stock screws that hold on the signal lights didnt survive. I have to second that! those are some cheap-o screws... mine made it, but barely, and i'm gonna replace them anyhow... anyone know what size they are?