November 24th, 2010, 09:08 AM | #1 |
‘94 Rider
Name: Colin
Location: Lewis Center, Ohio
Join Date: Nov 2010 Motorcycle(s): 1994 Kawasaki Ninja EX250F Posts: 81
|
Low-Speed Maneuvering
Hello,
Ever since I started riding motorcycles a few years ago, there's been something that's always given me some problems. Lets say I pull up to a four-way stop, and want to turn left. As I'm starting out from a stop and turning at the same time, I tend to take the turn wide all the time. Not wide enough to almost hit the curb, but it makes me uncomfortable. I should also say that this only happens with me at slow speeds. What advice can you guys give me on how to fix this? |
|
November 24th, 2010, 10:01 AM | #2 |
ninjette.org member
Name: Jeff
Location: california
Join Date: Nov 2010 Motorcycle(s): 2010 Daytona 675 SE Posts: 30
|
i had the same issue when i was first started riding. for me it was a confidence thing. i wasn't comfortable at the time leaning the bike over at such low speeds, i always thought the bike would fall over. i would try to turn with just moving the handlebars and i always swung a bit wide. i found for me that if i just trust the bike to not slip out under me, i could lean the bike over quite a bit as long as i had some throttle. for me, i just needed to lean the bike a bit more and tight turns were a piece of cake.
of course everybody situation is a little different, but that was my experience. its amazing how tight these little bikes can turn around when you have confidence in them. |
|
November 24th, 2010, 11:00 AM | #3 |
ninjette.org member
Name: KT
Location: Left Coast
Join Date: Oct 2010 Motorcycle(s): 1 of them Big Four Posts: 84
|
when I first started, I also have problem with u-turns, always put both feet down, took me a few weeks to get over it, advises is to trust your baby , and you'll get over it in no time
|
|
November 24th, 2010, 11:15 AM | #4 |
ninjette.org guru
Name: lux
Location: NY
Join Date: Jul 2010 Motorcycle(s): 2010 Ninja 250R Posts: 306
|
You've been riding for a few years so I apologize if you know this already: Look where you want to go, and try to practice figure eights. Have you taken the MSF course? We practiced figure eights in an outline of a rectangle. That would seem to help with the slow speed sharp-angled turns. David L. Hough has a some books, Proficient Motorcycling and More Proficient Motorcycling. I thought they were good reads.
|
|
November 24th, 2010, 11:28 AM | #5 |
‘94 Rider
Name: Colin
Location: Lewis Center, Ohio
Join Date: Nov 2010 Motorcycle(s): 1994 Kawasaki Ninja EX250F Posts: 81
|
Thanks for the help guys, yeah I'm sure if I had more trust in myself and the bike it would be no problem. I guess I REALLY just don't want to wreck my bike, as it's in perfect shape
And yes, I have taken the MSF course. Actually in the course, I did very well with low speed cornering and what not. It seems in day-to-day riding, sometimes I don't have any problems and another day I will take all my turns wide. It's like sometimes I just have "off-days". |
|
November 24th, 2010, 11:35 AM | #6 |
ninjette.org certified postwhore
Name: Scott
Location: Carlise Ohio
Join Date: Apr 2010 Motorcycle(s): Yahama v star 650 classic Posts: A lot.
|
Go to a big open parking lot. Pratice doing turns, and figure eights. This will help you alot! Thats what I did and it did wonders! Ride safe!
__________________________________________________
|
|
November 24th, 2010, 03:44 PM | #7 |
ninjette.org certified postwhore
Name: Frugal
Location: Dallas/Fort Worth (DFW)
Join Date: Mar 2010 Motorcycle(s): Several Posts: A lot.
|
I found that it's harder to do tight turns on the Ninja than it was on the 250 Suzukis and Honda we had in the MSF course. What I do on the Ninja is to sort of let the bike lean over then steer to correct it. It feels like I'm "laying" the bike into the turn. The bars won't turn 90 degrees like on a bicycle so there's no risk of going over the bars.
BTW, I hated The Box in the course. Grrr... Last futzed with by FrugalNinja250; November 30th, 2010 at 11:20 AM. |
|
November 25th, 2010, 10:00 PM | #8 |
ninjette.org newbie
Name: Taylor
Location: Compton
Join Date: Nov 2010 Motorcycle(s): None yet Posts: 2
|
|
|
November 26th, 2010, 07:03 PM | #9 | |
ninjette.org member
Name: KT
Location: Left Coast
Join Date: Oct 2010 Motorcycle(s): 1 of them Big Four Posts: 84
|
Quote:
|
|
|
November 27th, 2010, 08:56 AM | #10 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
I totally almost crashed the other day messing around in the parking lot leaving work. I was doing hard left-hand circles, and when I want to pull out I started to accelerate to straiten up and leave. But the cold engine bogged when I gave it gas, and I totally almost fell over to the inside. I honestly dont know how I stayed on, because my body was halfway off the bike (like, my inside foot was already on its way over the tank before I was conciously able to correct it). I think I clutched the RPMs back up without thinking (years of dirtbiking). Boy would that have been embarassing haha.
But yeah I love doing low-speed riding in parking lots. I can literally get so distracted doing it I will not even notice when my coworkers pull up, heh. Posted via Mobile Device |
|
November 27th, 2010, 11:02 AM | #11 | |
‘94 Rider
Name: Colin
Location: Lewis Center, Ohio
Join Date: Nov 2010 Motorcycle(s): 1994 Kawasaki Ninja EX250F Posts: 81
|
Oh yes, it's been cold and rainy here for a few days now. It even rained all day on thanksgiving.
Quote:
|
|
|
December 4th, 2010, 07:28 AM | #12 |
ninjette.org guru
Name: Samer
Location: Jupiter, Florida
Join Date: Sep 2009 Motorcycle(s): 09 Ninja 250R SE Posts: 376
|
This guy has some good instructional videos. One thing I can add is [corrected] using rear brake. Basically you can ride the rear brake a little bit while going slow and it helps to keep the bike balanced. Also, the first video is specifically about turning quickly from a stop.
Last futzed with by Samer; December 6th, 2010 at 09:09 PM. |
|
December 4th, 2010, 11:07 AM | #13 | |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Quote:
What you're describing is simply the use of the rear brake, which as you mentioned, can be especially helpful at slow speed maneuvering.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
December 4th, 2010, 02:56 PM | #14 |
ninjette.org guru
Name: Samer
Location: Jupiter, Florida
Join Date: Sep 2009 Motorcycle(s): 09 Ninja 250R SE Posts: 376
|
oops. You are right, the two concepts got incorrectly attached in my head. Thanks Alex. So nix the term, but the procedure of using the rear brake slightly for very slow maneuvering is indeed effective
|
|
December 4th, 2010, 03:29 PM | #15 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Yeah, when doing u-turns and such, use the rear brake to slow down and make the make "fall" inward, and use thrust (moderated with the clutch, not the throttle**) to stand the bike up. You can then angle the bars however you need (full lock, for example) and then keep the bike balanced with brake and thrust.
**When doing this, use the clutch to control the amount of torque going to the rear wheel. I will either rapidly and continually blip the throttle, or try to hold a steady constant low-throttle opening, in order to keep the engine producing consistent output without having to worry about it bogging.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
December 5th, 2010, 05:34 AM | #16 |
Ninja chick
Name: Allyson
Location: Athens, GA
Join Date: Jun 2009 Motorcycle(s): '13 Ninja 300 Posts: A lot.
Blog Entries: 4
MOTM - Dec '13, Feb '15
|
A few things that help me are to point my head in the direction where I want to go just as I start moving. Just look there and you will go there! 2nd, when doing low-speed turns like that, don't lean with the bike as you would when going countersteering speeds. Rather lean the bike up under you...just flick it. It will not slide as long as there is nothing on the pavement to make you lose traction. Doing figure 8s with locked bars will help you realize just how tight that baby can turn. Watch someone else do some, and you'll be able to see that the bike isn't leaned nearly as far as we think it is when we're on it! Good luck!
__________________________________________________
Sometimes it's the journey that teaches you a lot about your destination. ~Drake Check out my Appalachian Trail journal, 2015! Postwhores are COOL! ~Allyson |
|
December 6th, 2010, 02:06 PM | #17 | |
ninjette.org sage
Name: Misti
Location: Vancouver, BC
Join Date: Oct 2010 Motorcycle(s): currently: Yamaha YZF 250 dirt/motard Posts: 787
|
Quote:
Misti
__________________________________________________
"Leap and the net will appear!" superbikeschool.com www.motomom.ca |
|
|
December 6th, 2010, 03:26 PM | #18 |
ninjette.org certified postwhore
Name: Alex
Location: Belfast, ME
Join Date: Jul 2008 Motorcycle(s): 2010 Honda NT-700-V, formerly, Green 2008 Ninja 250R Posts: A lot.
|
You mentioned trail braking--something I frequently do. My new bike has the front and rear brakes interconnected--sort of takes trail braking out of the equation. Don't know. I do think that I will do the advanced MSF this spring.
__________________________________________________
Ninjette, Sold. New Bike: 2010 Honda NT-700V/VA, 73 Honda 550, 74 Honda 550 |
|
December 6th, 2010, 04:59 PM | #19 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Trail braking is not inherently related to either brake. Again, it just refers to "trailing" off the brakes after the turn has been initiated.
Posted via Mobile Device |
|
December 6th, 2010, 05:08 PM | #20 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
And yeah I want to do the advanced MSF course also. I might do it before I get new tires so if they have me do a bunch of skidding it wont be so bad haha.
Posted via Mobile Device |
|
December 7th, 2010, 01:45 PM | #21 |
ninjette.org certified postwhore
Name: Alex
Location: Belfast, ME
Join Date: Jul 2008 Motorcycle(s): 2010 Honda NT-700-V, formerly, Green 2008 Ninja 250R Posts: A lot.
|
J, Thanks for clearing that up for me. I usually slow down quite a bit until I can set up my turn. Then the throttle is rolled up gently--a lot more gently on the 700. I do believe that an advanced MSF course in the early spring every couple of years is money well spent.
__________________________________________________
Ninjette, Sold. New Bike: 2010 Honda NT-700V/VA, 73 Honda 550, 74 Honda 550 |
|
December 7th, 2010, 04:53 PM | #22 |
Livin' the Minimoto Life
Name: Mark
Location: Riding around in TX
Join Date: Mar 2009 Motorcycle(s): 2022 Honda Navi, 2018 Z-125 Pro Posts: A lot.
|
I also think the beginner course every few years is money well spent (not to mention you can show people up out on the bike! ). Reminds you of the things you should be thinking about, that we often forget about.
I still flip through the booklet on occasion to remind myself of things I may have forgotten.
__________________________________________________
--- My IG Page --- My FB page! --- 2022 Honda Navi && 2018 Z-125 Pro |
|
January 16th, 2011, 07:20 PM | #23 |
ninjette.org sage
Name: john
Location: Palm Beach County, Fl Sligo County, Eire
Join Date: Dec 2010 Motorcycle(s): 2005 ninja 250 street fighter, 2008 street fighter ninja 500, 2001 nsr 125 Posts: 812
|
As for your cornering, i think you're entering the turn too soon is all. Wait longer, lean further and then give it the throttle good. As for slow spped maneuvering(?) you use the throttle and control speed with the rear brake. Mucho practice is needed but with the go (throttle) and stop (brakes) you'll learn. Leave the front brake and clutch out of the equation. Happy trails, save riding.
|
|
January 16th, 2011, 09:16 PM | #24 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
This would be simple, except there is one problem. At least with these bikes, on/of throttle is annoyingly jerky and unpredictable. Using the clutch, while adding another skill to master, will ultimately allow for MUCH smoother control of power delivery at low speeds.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 17th, 2011, 08:38 AM | #25 | |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Quote:
__________________________________________________
|
|
|
January 17th, 2011, 10:22 AM | #26 |
ninjette.org sage
Name: john
Location: Palm Beach County, Fl Sligo County, Eire
Join Date: Dec 2010 Motorcycle(s): 2005 ninja 250 street fighter, 2008 street fighter ninja 500, 2001 nsr 125 Posts: 812
|
No offense but i sort of feel neither one of you have put in the days (not hours) doing this, and if you have, to each their own, i don't kick dead horses. What works for you is the right way. Peace out.
|
|
January 17th, 2011, 07:52 PM | #27 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Lol, I am not sure what your point was with that statement. Are you saying there isn't any on/off throttle jerkiness inherent to this bike? And if anything, that we might have not been riding (street) that long, yet still found adding clutchwork to make manuevering easier, should make it clear that it doesn't take a 20-year vet to know using clutch to control wheel thrust during low-speed manuevering effective. In fact, I figured out my first day of parking lot practice that the only way I could consistently make it through the Box Test was to use clutch, because on/off response was simply too jerky, and I know it isn't a throttle control issue because I've been on bikes in some form or another for half my life, a couple of which would kick the rear sideways or toss you off the back at 50mph if you were careless with the throttle.
If you have a good reason for people to do things your way, share it so we can all learn. But, there is no need to flatly dismiss anyone who disagrees with you without providing sound reasoning.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 17th, 2011, 07:52 PM | #28 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Oh, and those videos posted above are great! I watched them several times before I even got my bike, just so I could start mentally preparing to learn those techniques on a street machine.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 17th, 2011, 08:24 PM | #29 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
No one enjoys assumptions. I may not own my own bike yet, but I have had my fair share of riding experience (yes, days).
__________________________________________________
|
|
January 17th, 2011, 11:12 PM | #30 |
ninjette.org member
Name: Luis
Location: Altadena, CA
Join Date: Jan 2011 Motorcycle(s): none yet Posts: 41
|
this is some good info i gotta watch all the vids now
__________________________________________________
SingleCamApparel.com |
|
January 18th, 2011, 08:49 AM | #31 |
ninjette.org sage
Name: Marc
Location: Crawfordville, Florida
Join Date: Jan 2010 Motorcycle(s): 2005 Suzuki S50, 2006 Kawasaki Ninja EX250F, 1990 Honda PC800, 2000 Yamaha TW200 Posts: 848
|
One of the reasons for difficulty with low speed maneuvers is that you may be actually going TOO slow. It's difficult to balance the bike at a snail's pace, sometimes if you speed up just a little, these tight turns are actually easier to do. It's important to look through the turn, give it more throttle, press and turn the bars and look where you want to go. Look down at the ground, that's where you'll wind up.
|
|
January 18th, 2011, 03:37 PM | #32 |
ninjette.org sage
Name: john
Location: Palm Beach County, Fl Sligo County, Eire
Join Date: Dec 2010 Motorcycle(s): 2005 ninja 250 street fighter, 2008 street fighter ninja 500, 2001 nsr 125 Posts: 812
|
I think maybe you should've mentioned clutching in and out, in and out as well. This is from someone who has a $3k bike, spent several hundred more on top of it, and it still doesn't run right but just won't take "whatever is right for you" as an agreement and let it go.
|
|
January 18th, 2011, 08:15 PM | #33 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
If you think I'm (well, we're) wrong, tell us why. Your insecurity-driven e-politics and personal attacks aren't going to help anyone with low-speed manuevering. Either you want to contribute, or you just need to feel "right." Which is it?
BTW, technical prowess are operating ability are hardly related. And I know people with $14k 1000CC race bikes who can barely make their way across the parking lot without dragging their feet and wobbling all over. What's your point?
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 18th, 2011, 08:22 PM | #34 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
__________________________________________________
|
|
January 18th, 2011, 08:45 PM | #35 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
It would be on topic if he actually had any justification to tell us we are wrong.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 19th, 2011, 02:08 AM | #36 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Different strokes for different folks. I rarely use the clutch when maneuvering at low speed, no matter what bike I'm on. I know that some people do find it helpful. No worries either way, whatever works.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
January 19th, 2011, 09:53 AM | #37 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
I suppose the alternative of keeping the throttle on to some degree, while using the rear brake to control whether the bike is accelerating or deceleration, would accomplish the same thing. Doing that, not only do you never have to worry about drivetrain slack since it is always being tensioned in the same direction, but the on-off throttle issue is bypassed. Either way it does take fine control to do it accurately and precisely, whether you are manipulating the clutch or the rear brake. I can and do use both methods, but started using primarily the clutch for finer control and the brake for more gross control.
Practice!
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 19th, 2011, 01:17 PM | #38 |
Professional belly dancer
Name: James
Location: Toronto
Join Date: Apr 2009 Motorcycle(s): 1992 GSX-R 750 Posts: A lot.
|
This will probably just add fuel to the fire, but I was trained to feather the clutch while scooting around in very low speeds in first gear. This was done in addition to riding the rear brake for added stability.
Mind you I only use this technique when I'm basically crawling around in traffic or in a parking lot in first gear where, if I had the clutch fully out, the bike would be at an rpm that would bog the hell out of the engine. But then again I think that's what the point of that exercise was. If you're going slow enough to bog the engine in 1st gear, it's time to feather that clutch. |
|
January 19th, 2011, 07:58 PM | #39 |
certified newbie
Name: oniz
Location: north carolina
Join Date: Apr 2010 Motorcycle(s): 08 ninja 250r blue Posts: 127
|
usually i just increase throttle through the turn to help stabilize my lean. what i hate is when the bike isnt warmed up yet and the throttle blips out when i roll on it too fast while im turning and almost kills the engine. infact the engine died one time when i was making a left turn from a stop at an intersection. scared the crap out of me but thank god i was quick enough to upright the bike and turn the engine back on to complete my turn
__________________________________________________
locktite ALL the things!!! |
|
January 19th, 2011, 09:40 PM | #40 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
I think we are talking more like, turning around in a parking spot to face backwards, or turning around in a neighborhood street, etc.
Today when I was parking my bike, I realized I do just drag the rear brake to keep constant tension on it, and then feather the clutch to control thrust.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Low Speed Low Side :S | RandomPhantom | !%@*#$%!)@#&!%@ I crashed! | 6 | September 20th, 2013 01:14 PM |
Dropped at low speed | Mbomb | !%@*#$%!)@#&!%@ I crashed! | 13 | July 21st, 2013 09:07 PM |
Low Speed Shifting | himynameisjoe | Riding Skills | 27 | April 22nd, 2013 04:46 PM |
Low speed drop on highway | nliu314 | !%@*#$%!)@#&!%@ I crashed! | 10 | June 25th, 2012 07:19 AM |
Low Speed Maneuvering Workshop 01/31/2010 | pedaltothemetal | Ride Reports | 5 | February 1st, 2010 09:59 AM |
|
|