A&L Motorsports/Cycle Control Cyber Monday sale.

Dr Honda · November 27th, 2010, 05:34 AM

Hi guys,

Just an FYI. We are having a 15% off sale for Cyber Monday on all of your favorite Cycle control parts over at A&L Motorsports.

Thanks for the support over the past few years.

Use code "CYMON"

jshox · November 27th, 2010, 11:37 AM

awesome now I can get those rear set adjusters!

CZroe · November 27th, 2010, 12:44 PM

A link and some sample prices would be useful in this post.

Dr Honda · November 27th, 2010, 02:38 PM

Quote:

Originally Posted by CZroe

A link and some sample prices would be useful in this post.

Yep... that would help.

www.a-lmotorsports.com

dk58 · November 28th, 2010, 06:43 AM

Ordered some adjusters, hopefully I'll get them quick since you guys are like 40 minutes away!

Dr Honda · November 28th, 2010, 06:58 AM

Quote:

Originally Posted by dk58

Ordered some adjusters, hopefully I'll get them quick since you guys are like 40 minutes away!

Yep... looks like you are just a few miles away. I'll get them out on Monday... you should have them on Tuesday.

Thanks for the order.

Eva689 · November 29th, 2010, 02:39 AM

How do the adjusters go for someone who is a little over 6'?

Also, Tony, I enquired via your website on shipping to Australia. But if you'd like to post the cost here then I'm sure there are a couple other Aussies around who would appreciate the info, thanks.

Dr Honda · November 29th, 2010, 04:48 AM

Eva689:

I'm not quite sure what you are asking... as far as the 6' thing. But, regardless of the size of the rider, the rearset adjusters will give an aggressive rider the extra ground clearance needed for hard cornering. Also, since the Ninja 250 already has a "Relaxed" foot position compared to most sport bikes... it will get your feet up, so you can get the pressure on the pegs, and your legs in a good position to do some good old-fashioned knee dragging.

(FYI, I sent you an email already)

Eva689 · November 29th, 2010, 05:40 AM

Quote:

Originally Posted by Dr Honda

Eva689:

I'm not quite sure what you are asking... as far as the 6' thing. But, regardless of the size of the rider, the rearset adjusters will give an aggressive rider the extra ground clearance needed for hard cornering. Also, since the Ninja 250 already has a "Relaxed" foot position compared to most sport bikes... it will get your feet up, so you can get the pressure on the pegs, and your legs in a good position to do some good old-fashioned knee dragging.

(FYI, I sent you an email already)

Ahh. Those of us around/over 6' (at least in my experience) cannot place their feet in the proper position on the pegs in stock position and keep their thighs/knees under the ridge of the tank. My legs straddle the ridge, which is useless for hard cornering. When I place the balls of my feet on the pegs where they are now, I can't brake/shift, but my legs sit beautifully where they are supposed to beside the tank. I was hoping a rearset adjustment would allow me the best of both worlds. I assume they do, since a back and up movement of the pegs mimics what I do by moving my feet. Going to place an order now and find out

Dr Honda · November 29th, 2010, 05:52 AM

OK... Now I get what you are asking.

Yes, using the rearset adjusters... you can find the spot where your legs are up... and not hitting the ridge of the tank.

When you move the pegs back... the top of your leg will drop. Then, you can raise the pegs up, to gain the needed ground clearance.

Hope that's the info you were looking for.

Eva689 · November 29th, 2010, 06:16 AM

Just ordered my set with the discount. Will let everybody know about the results when they arrive here in Australia (could be a while with USPS).

austexjg · November 29th, 2010, 08:43 AM

I have a set that I still need to install.

Dr Honda · November 30th, 2010, 11:48 AM

Hi Guys,

I had a couple people ask me to extend the sale because either they missed it... or they didn't have the cash to get what they wanted... so the code will be good all week.

CThunder-blue · November 30th, 2010, 09:35 PM

Dang, I ordered mine last week!

cbowman78 · December 1st, 2010, 07:50 AM

I know. I just ordered mine before the sale as well.

This sucks!!!!

supermanster · December 2nd, 2010, 07:27 PM

Ordered Mine today! Thanks for the discount.

November 27th, 2010, 05:34 AM	#1
Dr Honda ninjette.org member Name: Tony Location: Pittsburgh Join Date: May 2010 Motorcycle(s): Buell XB12Ss, Victory Vegas, DRZ400, XR50 Posts: 84	A&L Motorsports/Cycle Control Cyber Monday sale. Hi guys, Just an FYI. We are having a 15% off sale for Cyber Monday on all of your favorite Cycle control parts over at A&L Motorsports. Thanks for the support over the past few years. Use code "CYMON"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[motorcycle-usa.com] - Bike Show & Sale Corral at Barber Motorsports	Ninjette Newsbot	Motorcycling News	0	June 13th, 2013 09:00 PM
Black Friday/Cyber Monday gear deals?	Aggrotech	Motorcycle Gear	6	November 4th, 2012 05:32 PM
A&L Motorsports/CycleControl Cyber Monday Sale.	Dr Honda	Motorcycle-related	2	November 28th, 2011 09:13 AM
Did Cycle Control go out of business? EDIT: Nope	IanYoung	General Motorcycling Discussion	45	May 16th, 2011 12:08 PM
cycle control foot peg extenders.	DEXSPEED	2008 - 2012 Ninja 250R Farkles	3	November 8th, 2009 07:39 PM

November 27th, 2010, 11:37 AM	#2
jshox Champion Name: Jerry Location: NC Join Date: Sep 2010 Motorcycle(s): '09 Ninja 250r SE Posts: 27	awesome now I can get those rear set adjusters!

November 27th, 2010, 12:44 PM	#3
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	A link and some sample prices would be useful in this post.

November 28th, 2010, 06:43 AM	#5
dk58 ninjette.org member Name: Dan Location: Pittsburgh, PA Join Date: Sep 2010 Motorcycle(s): 10 Ninja 250R Posts: 160	Ordered some adjusters, hopefully I'll get them quick since you guys are like 40 minutes away!

November 29th, 2010, 02:39 AM	#7
Eva689 ninjette.org member Name: Shaun Location: Adelaide Join Date: Aug 2010 Motorcycle(s): '08 Ninja 250R Posts: 27	How do the adjusters go for someone who is a little over 6'? Also, Tony, I enquired via your website on shipping to Australia. But if you'd like to post the cost here then I'm sure there are a couple other Aussies around who would appreciate the info, thanks.

November 29th, 2010, 04:48 AM	#8
Dr Honda ninjette.org member Name: Tony Location: Pittsburgh Join Date: May 2010 Motorcycle(s): Buell XB12Ss, Victory Vegas, DRZ400, XR50 Posts: 84	Eva689: I'm not quite sure what you are asking... as far as the 6' thing. But, regardless of the size of the rider, the rearset adjusters will give an aggressive rider the extra ground clearance needed for hard cornering. Also, since the Ninja 250 already has a "Relaxed" foot position compared to most sport bikes... it will get your feet up, so you can get the pressure on the pegs, and your legs in a good position to do some good old-fashioned knee dragging. (FYI, I sent you an email already)

November 29th, 2010, 05:52 AM	#10
Dr Honda ninjette.org member Name: Tony Location: Pittsburgh Join Date: May 2010 Motorcycle(s): Buell XB12Ss, Victory Vegas, DRZ400, XR50 Posts: 84	OK... Now I get what you are asking. Yes, using the rearset adjusters... you can find the spot where your legs are up... and not hitting the ridge of the tank. When you move the pegs back... the top of your leg will drop. Then, you can raise the pegs up, to gain the needed ground clearance. Hope that's the info you were looking for.

November 29th, 2010, 06:16 AM	#11
Eva689 ninjette.org member Name: Shaun Location: Adelaide Join Date: Aug 2010 Motorcycle(s): '08 Ninja 250R Posts: 27	Just ordered my set with the discount. Will let everybody know about the results when they arrive here in Australia (could be a while with USPS).

November 29th, 2010, 08:43 AM	#12
austexjg ninjette.org sage Name: J.G. Location: Austin Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959	I have a set that I still need to install.

November 30th, 2010, 11:48 AM	#13
Dr Honda ninjette.org member Name: Tony Location: Pittsburgh Join Date: May 2010 Motorcycle(s): Buell XB12Ss, Victory Vegas, DRZ400, XR50 Posts: 84	Hi Guys, I had a couple people ask me to extend the sale because either they missed it... or they didn't have the cash to get what they wanted... so the code will be good all week.

November 30th, 2010, 09:35 PM	#14
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Dang, I ordered mine last week!

December 1st, 2010, 07:50 AM	#15
cbowman78 ninjette.org member Name: Clint Location: Niagara Region, Ontario Join Date: Aug 2010 Motorcycle(s): 2009 Ninja 250r Posts: 61	I know. I just ordered mine before the sale as well. This sucks!!!!

December 2nd, 2010, 07:27 PM	#16
supermanster ninjette.org member Name: Mark Location: Manila Philippines/ Lake Forest California Join Date: Nov 2009 Motorcycle(s): Ninja 250R 09 Posts: 65	Ordered Mine today! Thanks for the discount.