|
May 20th, 2010, 09:51 AM
|
#1 |
|
ninjette.org member
Name: Eric
Location: TN
Join Date: May 2010 Motorcycle(s): depends on the day of the week Posts: 36
|
valve clearance??? what are they supposed...
I have two pdf manuals now. The one manual is missing the page 4-6 which probably has the information I need. The other manual is a 86 model and I am not certain that the valve clearance are the same. So does any one know what the valve clearances are for a 2006 ninja 250. I need exhaust and intake (inlet). Thanks for the info.
|
|
|
|
May 20th, 2010, 09:53 AM
|
#2 |
|
ninjette.org member
Name: Eric
Location: TN
Join Date: May 2010 Motorcycle(s): depends on the day of the week Posts: 36
|
the 86 maual say .08-.13 inlet and .11-.16 exhaust in mm. Just want to make sure they are the same.
|
|
|
|
|
May 20th, 2010, 10:00 AM
|
#3 |
|
ninjette.org member
Name: Eric
Location: TN
Join Date: May 2010 Motorcycle(s): depends on the day of the week Posts: 36
|
2006 ninja 250
inlet in mm ( .08-.13) exhaust in mm ( .11-.16) according to the local dealer so it appears they are the same. Answered my own question but figured this might help someone at a later date. |
|
|
|
|
May 20th, 2010, 10:41 AM
|
#4 |
|
ninjette.org member
Name: Matt
Location: Middle GA
Join Date: May 2010 Motorcycle(s): 2003 Ninja 250 Posts: 184
|
That's correct per ninja250faq also...
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| valve clearance | sharky nrk | 2008 - 2012 Ninja 250R Tech Talk | 8 | July 18th, 2014 06:19 AM |
| Should I do the valve clearance inspection myself? | nickjpass | The Ex-Ninjetters Lair | 13 | June 13th, 2014 12:50 AM |
| Valve Clearance check | tsmith3605 | 2008 - 2012 Ninja 250R Tech Talk | 3 | July 26th, 2013 01:10 PM |
| Valve Clearance Problem | ElJokerr | 1986 - 2007 Ninja 250R Tech Talk | 9 | February 22nd, 2013 12:40 PM |
| valve clearance specs | dotsony | 1986 - 2007 Ninja 250R Tech Talk | 20 | March 17th, 2011 02:46 PM |
| Thread Tools | |
|
|
