May 9th, 2010, 05:38 AM | #1 |
ninjette.org member
Name: Tom
Location: Boston Ma
Join Date: Apr 2010 Motorcycle(s): Yellow n black 2002 ninja ex250 Posts: 11
|
My bike kept sputtering, exhaust made a popping sound, first gear barely moves?
Ok so today was fourth time taking my starter bike out ( I took the safety class FYI )
n my gear seemed all screwed up. The bike is idling right between 1-2 where it should be but in first at a red light it died on me n then going up a hill bike kinda sputtered exhaust made a loud pop n it died again. Any ideas? I'm obviously a new rider so maybe I'm just doing something wrong. Bike ran beautifully past 3 days . I also have replaced plugs n added oil in last 3 days. Well if any of u vets has any pointers or advice I'd absolutly love to hear it. Well till later thanx if problem stops I'll post up hopefully you guys will steer me in the right direction thanks Tom m Posted via Mobile Device |
|
May 9th, 2010, 06:50 AM | #2 |
Wartown, USA
Name: Bryan
Location: Warner Robins, GA
Join Date: Nov 2009 Motorcycle(s): 2009 Ninja 250R SE, 2007 Ninja 650R, and assorted other bikes Posts: A lot.
|
Im thinking you arent getting it reved up enough or are selecting the wrong gear. The ninja 250r has to be above 4 grand in RPM's to actually do anything. Pick the right gear, and keep the revs up and it should run fine.
|
|
May 9th, 2010, 07:20 AM | #3 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
The bike ran fine after you changed the plugs? or was this the first time you rode it after changing them?
__________________________________________________
Pictures of my ninjette plus... |
|
May 9th, 2010, 10:50 AM | #4 | |
Join Date: Nov 2008 Posts: Too much.
|
Quote:
did you use the same brand/model plugs that you replaced? |
|
|
May 9th, 2010, 12:39 PM | #5 |
ninjette.org member
Name: Tom
Location: Boston Ma
Join Date: Apr 2010 Motorcycle(s): Yellow n black 2002 ninja ex250 Posts: 11
|
Ok first off thanks for replying to my post I actually added oil and changed plugs 3 days ago exactly. before that the bike wouldn't start at all.before leaving my house I started up my bike n noticed oil light is on so Ima go home in 30 min n see if that is the problem I'll let u guys know thanks again always very greatfull for all n any advice you guys give me
Tom m Posted via Mobile Device |
|
May 9th, 2010, 02:15 PM | #6 |
Join Date: Nov 2008 Posts: Too much.
|
Tom,
some history on the bike, please? |
|
May 11th, 2010, 06:21 AM | #7 |
ninjette.org member
Name: Scott
Location: Delaware
Join Date: Jul 2009 Motorcycle(s): 2008 Ninja 250r(sold), 2007 650R (sold), 2013 Ninja 300 Posts: 199
|
The bike is properly warmed up right? I know its gotten colder in the past week here on the east coast, and Ive had to warm my bike up longer lately or it will run like crap/stall...
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Slip-on: Exhaust Popping? | Manimal | 2013 - 2017 Ninja 300 Tech Talk | 16 | October 2nd, 2014 08:26 AM |
Popping sound after installing akrapovic and a k&n filter | abhishekrawat2702 | 2008 - 2012 Ninja 250R Tech Talk | 13 | April 7th, 2012 06:00 PM |
Popping noise out the exhaust | Kviper52 | 1986 - 2007 Ninja 250R Tech Talk | 1 | October 6th, 2011 07:07 AM |
How much popping? (and exhaust leak) | singlecoillover | 2008 - 2012 Ninja 250R Tech Talk | 30 | May 30th, 2011 08:35 PM |
250r Popping Out Of Gear | MrTiddles | 2008 - 2012 Ninja 250R Tech Talk | 18 | May 11th, 2009 01:56 PM |
|
|